FPGA中信号可靠性设计的方法研究

对FPGA程序设计中存在的信号抖动、相位差异以及在模块继承时不同时钟域引起的软件异常等可靠性设计问题,将目前常用的信号抖动抑制及判断方法进行了分析总结,提出了几种新的FPGA内部的信号处理方法;通过实验验证,这些方法对不同脉冲宽度、不同突发频率的随机干扰,能够进行有效抑制;通过合理降频、例化原语等方法优化软件设计,提高了FPGA输出信号的完整性和可靠性;在航天、航空和工业控制领域中,有效地解决了软件系统的可靠性问题,为建立可靠性高、运行稳定的软件系统创造了条件。     

初始模型对含噪动态光散射数据正则化反演结果的影响

分别采用最小模型矩阵、最平坦模型矩阵、最光滑模型矩阵作为初始化模型,对加入5种不同水平随机噪声的90 nm窄单峰、90 nm宽单峰和250 nm窄单峰、250 nm宽单峰颗粒体系的模拟分布进行了正则化反演,并对反演结果进行比较。结果表明：当噪声水平为0时,正则化初始模型的选择对反演结果没有明显影响。随着噪声水平的增加,采用三种初始化模型反演得到的峰值误差和粒度分布误差都随之变大,但采用最平坦模型和最光滑模型反演得到的峰值和粒度分布误差明显小于采用最小初始模型的反演误差。当噪声水平大于0.01时,选择最平坦初始模型获得的粒度分布结果优于采用最光滑初始模型和最小初始模型获得的结果,而采用最光滑初始模型反演得到的峰值优于最平坦初始模型和最小初始模型的反演峰值。因此,采用正则化算法处理含噪动态光散射数据时,为得到最优的粒度分布信息,宜采用最平坦初始模型,若需要获取最准确的峰值信息,则应选择最光滑初始模型。     

Effect on Intensity Correlation Time by Input Signal in a Single-Mode Laser with Bias Signal Modulation

The effect on intensity correlation time T by input signal is studied for gain-noise model of a single-mode laser driven by colored pump noise and colored quantum noise with colored cross-correlation with a bias signal modulation in this paper. By using the linear approximation method, we detect that there exists maximum （i.e., resonance） in the curve of the intensity correlation time T upon bias current io when the noise correlation coefficient λ is positive; and there exists minimum （i.e., suppression） in the T-io curve when λ is negative. And whenλ is zero, T increases monotonously with increasing io. Furthermore, the curve of T upon the signal frequency Ω is also studied. Our study shows that no matter what the value of λ is, there exists minimum （i.e., suppression） in the T-Ω curve.     

带有STC功能的接收机中频组件的设计

本文介绍了带有STC功能的接收机中频组件的设计,它动态范围宽,输出饱和电平大,选择性好,响应时间快.同时,对系统的电磁干扰加以讨论,并介绍了抗干扰的有效措施.     

8 mm收发组件信号分析

主要研究8mm波段,雷达FMCW信号的时域及频域特性,通过对理论值与实测值的比较、分析,验证了8mm收发模块的可行性,并为下级信号处理作了准备。     

Dynamic control of retrieval contrast in a ∧-type atomic system

We propose an efficient scheme for optimizing the optical memory of a sequence of signal light pulses in a system of ultracold atoms in ∧ configuration.The memory procedure consists of write-in,storage,and retrieval phases.By applying a weak microwave field in the storage stage,additional phase-dependent terms are included,and the contrast of the output signal pulses can be dynamically controlled（enhanced or suppressed） through manipulating the relative phase φ between optical and microwave fields.Our numerical analysis shows that the contrast is enhanced to the most extent when φ = 1.5π.In addition,the contrast is in proportion to the Rabi frequency of the microwave field with a certain relative phase.     

任意相位差条纹信号细分方法的研究

为消除传统细分方法中由于两路条纹信号不正交引入的细分误差，提出了一种可对任意相位差条纹信号直接细分的新方法。根据两路条纹信号的极性和幅值大小，把一个信号周期分成8个区段。高速采集两路条纹信号，通过判断信号采样点所处的区段是否跳变对信号幅值交点进行动态跟踪。对不足一个周期的条纹移动，当测量出起点与终点的幅值，计算出其所在的区段及位置后，结合两路信号的交点，可实现对任意相位差条纹信号的细分。实验结果表明，该方法突破了传统细分方法必须信号正交的限制，可对任意相位差信号进行准确地细分，降低了条纹测量中器件安装与调试的难度，具有更强的环境适应性和抗干扰能力。     

Effects of light intensity on reflective ghost imaging

In this letter, we analyze the effects of light intensity find that the brightness of reflective ghost image can on reflective ghost imaging with thermal source. We be changed by modulating the light intensity of the source and the splitting ratio of the beam splitter. The signal-to-noise ratio will be improved by increa.sing the light intensity of the source. More important, we can obtain the reflective ghost image with high image quality by adopting a low light intensity signal beam and a high light intensity reference beam, which is better than the classical optical imaging, because it can reduce the effects of light on the object.     

基于分数阶傅立叶变换的线性调频回波参数估计

本文提出了一种适用于宽带线性调频回波的分数阶傅立叶变换参数估计方法。它通过寻找合适的信号代替发射信号做模版,使得模版信号与接收信号的模糊函数匹配度高,峰值尖锐,失真率低。再利用分数阶傅立叶变换与模糊函数的关系,使用两次分数阶域的峰值搜索代替原有的一次二维搜索降低计算量。仿真实验结果表明,本文提出的方法在精确估计宽带回波的时延和频移的同时降低了计算复杂度。     

Half baudrate electrical clock based demultiplexing scheme for OTDM-DQPSK signal using SOA and optical filter

A demultiplexing scheme based on semiconductor optical amplifier(SOA)and optical filter for optical time division multiplexing differential quadrature phase shift keying(OTDM-DQPSK)system is proposed and investigated experimentally.With only a common half baudrate electrical clock modulated 33%duty cycle return-to-zero(RZ-33)optical clock signal as pump,this scheme is cost-effective,energy-efficient,and integration-potential.A proof-of-concept experiment is carried out for the demultiplexing of a 2×40-GBd OTDM-DQPSK signal.Error-free performance is demonstrated,and the average power penalty for both channels is about 3 dB.