吸附原子电催化机理的研究——铂单晶(100)晶面上Pb、Cd吸附原子在甲酸电氧化中的助催化特性

In this work a modified adsorption method was used to form firstly a saturated Cd or Pb adlayer on platinum single crystal (100) surface, then its surface structure, the electrochemical stability and the desorption-readsorption CV properties were studied. The HCOOH oxidation has been used as a probe to determine the electrocatalytic propertics of Pt (100) with different surface concentration of Cd or Pb adatoms. The results show that Cd adatoms on Pt(100) inhibit both HCOOH dissociation adsorption (to form poisoning intermediates) and HCOOH oxidation via the reactive intermediate, and that Pb adatoms on Pt(100) inhibit only HCOOH disociation adsorption but catalyse HCOOH oxidation via the reactive intermediate, in this case the more Pb adatoms on Pt(100), the higher te catalytic effect. The highest enhanced catalytic effet has been found with the saturated Pb adlayer on Pt(100) (the coverage of Pb, calibrated by hydrogen adsorption, is then equal to 1.0), i.e. with a surface structure of C(2×2)-bridged Pb. The difference of influence to the hydrogen adsorption-desorption process and the different catalytic effect on HCOOH oxidation of Cd and Pb adatoms on Pt(100) were attributed to the intrinsic properties of Cd and Pd elements and also to their interaction with Pt(100). This results indicate that the electrocatalytic mechanism of Cd and Pb adatom on Pt(100) depends on the geometrical surface structure effect and, more importantly, on the electro structure effect during the interaction of adatoms with Pt(100) surface atoms.     

酶联免疫吸附法直接测定血清雌二醇

本合成了３种不同载体蛋白的雌二醇抗原，研究了载体蛋白免疫原性对雌二醇抗体产生的影响。应用酶联免疫吸附分析法测定了血清中雌二醇，浓度范围为５－１６０ｎｇ／ｍｌ（１．８×１０＾－＾８－５．９×１０＾－＾７ｍｏｌ／Ｌ）．ＲＳＤ％小于１０．％，检测限为１．９７ｎｇ／ｍｌ，相当于９８．５ｐｇ／孔（按空白平均值的二倍标准偏差计算）。另外，本还建立了一种用考马斯亮蓝Ｇ－２５０测定半抗原与蛋白结合比的方法，提     

计算单向复合材料弹性模量的新公式

根据复合材料单层的实际构造，提出了串并联组合模型，采用微观力学与宏观力学相结合的方法，推导出一组计算单向复合材料弹性模量的新公式。其优点是：Ｅ１和ｖ（１２）、Ｅ２和Ｇ（１２）的计算式形式对称，结构简单，计算容易，物理意义明确。我们把由世界上许多著名学者提出的多组预测公式和本文导出式计算所得的结果与国内外已发表的硼／环氧、碳／环氧、玻璃／环氧复合材料的实验数据相比较，结果表明：导出式比其他公式精确、更有价值，可供二程设计使用。     

Novel preparation of organic polymer-based monolithic column by microwave irradation

Microwave irradiation was firstly attempted for the preparation of organic-based monoliths of poly（styrene-divinylbenzene- methacrylic acid）, which single step in situ polymerization was carried out during 15 min. The colunm permeability, electrophoretic and chromatographac behaviors were comparatively evaluated using pressure-assisted CEC, GEC and low pressure-driven separation modes. The largest theoretical plates for the preparing column could be close to 18,0000 plates/m for thiourea in the mode of p-CEC. It provided a viable alternative to traditional initiation means for the perparation of monolithic capillary columns.     

烯烃加成反应活性与烷基极化效应的关系

烯烃的自由基加成和亲电加成速率受不同的因素控制.对于仅仅含烷基取代的简单烯烃:(1)与OH自由基加成速率-log kOH可由π键上烷基极化效应指数的几何平均值GMPEIπ关联:-log kOH=a bGMPEIπ c(GMPEIπ)2; (2)与亲电试剂加成速率log k可由π键两端碳原子所连基团极化效应指数PEI(L)和PEI(S)关联:log k=a bPEI(L) cPEI(S),其中的PEI(L)和PEI(S)分别表示极化效应较大和较小的一端.     

N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.     

扫描探针纳米加工技术的现状与发展趋势

介绍了扫描探针纳米加工技术的基本原理、应用前景和最新进展 ,并讨论了该技术的发展趋势     

草酸电还原制取乙醛酸的研究

研究了由草酸电解还原制备乙醛酸时，温度、草酸纯度、电解时间、电极状态和电解产物对电流效率和产率的影响。实验发现，除温度和原料纯度是重要的影响因素外，电极表面的有机物吸附和电解产物－乙醛酸的浓度具有更大的影响。     

电分析化学中的化学计量学方法及其应用进展

本文综述了电分析化学领域中化学计量学方法的应用进展，引用文献65篇。     

分子筛修饰电极的研究（Ⅰ）：氢醌／醌电对在分子筛修饰电极…

考察了中性分子电对Ｈ２Ｑ／Ｑ在１３Ｘ型分子筛修饰电极上的电化学行为。发现Ｈ２Ｑ／Ｑ电对在修饰电极上电响应迅速，为双电子可逆反应，不受溶液温度及是电极与溶液相对运动的影响，而与溶液的ｐＨ值有关。当ｐＨ≤２．０时，修饰电极对Ｈ２Ｑ／Ｑ电对的氧化／还原有明显的催化作用。