纳米镍钴铁氧体空心微球的制备与性能

以乙二醇为溶剂,氯化铁、氯化钴、氯化镍和醋酸铵为反应试剂,采用溶剂热法制备纳米Ni_xCo_1-xFe₂O₄(x=0、0.3、0.5、0.7、1)铁氧体空心微球,研究镍含量对铁氧体空心球的磁性与吸波性能的影响。借助X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)和网络分析仪对试样的物相组成、微观形貌和电磁特性进行表征。结果表明制备的镍钴铁氧体为尖晶石结构,且形貌为空心球,粒径在200 nm左右。当x=0时,镍钴铁氧体空心球饱和磁化强度最大为81.7 emu·g^-1,反射损耗在1 658.8 MHz有最小值为-16.9 dB。     

功能化碳纳米管的电磁性能研究及进展

碳纳米管是最近发展起来的一种结构独特,性能优异的新材料,已成为当今物理、化学、材料等领域共同关注的课题.而碳纳米管的功能化更是为我们开辟了一个广阔的研究领域.本文总结了近十多年来功能化碳纳米管的研究进展,并侧重对功能化碳管的合成方法及电磁特性以及应用进行了评述.     

“化学一步法”制备电磁功能化聚吡咯/γ-Fe2O3复合物纳米球及结构表征

在不添加掺杂剂的条件下, 以吡咯为单体, 三氯化铁为氧化剂, 采用"化学一步法"合成了电磁功能化的聚吡咯/γ-Fe2O3 复合物纳米结构. 研究了不同氯化亚铁用量对聚吡咯/γ-Fe2O3 复合物形貌、 电学性能以及磁学性能的影响. 结果表明, 氯化亚铁的用量对聚吡咯/γ-Fe2O3复合物的形貌影响不大, 都得到了聚吡咯/γ-Fe2O3复合物纳米球; 然而, 聚吡咯/γ-Fe2O3复合物纳米球的电学和磁学性能却明显受到氯化亚铁用量的影响. 聚吡咯/γ-Fe2O3复合物纳米球的电导率和最大饱和磁化强度随着氯化亚铁用量的增加而增大, 并在氯化亚铁用量增加到150 mg时达到最大值, 分别为72.1 S/cm和10.07 A·m2/kg, 实现了高电学性能和高磁学性能兼顾的电磁功能化导电聚合物纳米结构的制备.     

纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.     

PEDOT-PSS/Co-Fe_3O_4/PVA电磁功能复合纤维结构与性能

将化学共沉淀法合成的Co掺杂的Fe_3O_4(Co-Fe_3O_4)磁性粒子和化学氧化法合成的聚苯乙烯磺酸钠(PSS)掺杂的聚(3,4-乙撑二氧噻吩)(PEDOT-PSS)与聚乙烯醇(PVA)混合制备复合纺丝原液,然后经过湿法纺丝得到具有电、磁性能的PEDOT-PSS/Co-Fe_3O_4/PVA复合纤维.通过SEM、FTIR、XRD、TG、VSM以及电导率和机械性能的测试研究了不同牵伸倍率对复合纤维的结构和性能的影响.结果表明,随着牵伸倍率的增加,复合纤维的结晶性能、热稳定性能和机械性能都有所提升,其电导率则成倍增加,而其饱和磁化强度(M_s)则变化不大,约为1.7 A·m~2/kg.当牵伸倍数为4倍时,复合纤维的电导率可达到2.3 S/cm.     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.     

Effect of Cu doping on the magnetic and electrical properties of n=2 Ruddlesden-Popper manganates

A series of polycrystalline Cu-doped n=2 Ruddlesden-Popper manganates La1.2Sr1.8CuzMn（2-x）O7 （x=0, 0.04, 0.13） were synthesized by the solid state reaction method. The effect of Cu doping on the magnetic and transport properties has been studied. It is found that Cu substitution for Mn greatly affects the magnetic and electrical properties of the parent phase La1.2Sr1.8Mn2O7. With the increase of Cu content, the system undergoes a transition from longrange ferromagnetic order to the spin glass state and further to an antiferromagnetic order. A little of Cu dopant can lead to the samples showing semiconductor or insulator behaviour in the whole observed temperature range while the parent phase has a metal-insulator transition. These samples show colossal magnetoresistance at low temperatures and the value of it decreases with increasing Cu content.     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.     

含磁单极电动力学的电磁对偶对称性自发破缺问题

首先提出了一种认为磁单极的存在将导致电动力学电磁对偶对称性自发破缺的新观点,指出了和这种对称性自发破缺相关联的零质量标量粒子即Goldstone玻子存在的可能性.然后通过对含磁单极电动力学作用量描述困难的分析,提醒读者磁单极的存在给电动力学带来的复杂性和不对称.最后为非高能物理背景的读者提供了两类磁单极即经典场扩展位形类磁单极和点粒子磁单极的概念.     

NiCF/ABS复合材料的制备及电磁屏蔽效能研究

探讨了碳纤维(CF)表面镍金属的化学镀工艺,制备了镀镍碳纤维(NiCF),采用密炼工艺制备了ABS基体复合材料,研究了CF和NiCF含量对复合材料的导电性能及电磁屏蔽效能的影响。结果表明:采用化学镀的方法在碳纤维表面镀覆了金属镍,所形成的镀层均匀致密;镀覆时间为5min时,镀镍后的碳纤维电阻率降低两个数量级;复合材料电阻率随CF、NiCF含量的增加而逐渐减小;复合材料电磁屏蔽效能随CF、NiCF含量的增加而逐渐增加,当NiCF含量为25%(wt)(约13.3vol%)时,电磁屏蔽效能最高可达51dB。