冻土区体育场馆类建筑地基非稳态温度场的数值研究

季节性冻土区体育场馆类大空间建筑的地基强度直接影响着整个建筑的稳定性,而冻土温度是影响地基强度的重要因素.文章简单描述了冻土区体育场馆类建筑地基非稳态温度场的数学模型,利用广义差分方法建立了二维温度场问题的数值离散格式,分析了其广义差分解的最优误差估计.最后举实例数值计算了四川西北地区季节性冻土区一建筑地基温度场受地表...     

Nano-Crystalline Diamond Films with Pineapple-Like Morphology Grown by the DC Arcjet vapor Deposition Method

A nano-crystlline diamond film is grown by the dc arcjet chemical vapor deposition method. The film is characterized by scanning electron microscopy, high-resolution transmission electron microscopy （HRTEM）, x-ray diffraction （XRD） and Ftaman spectra, respectively. The nanocrystalline grains are averagely with 80hm in the size measured by XRD, and further proven by Raman and HRTEM. The observed novel morphology of the growth surface, pineapple-like morphology, is constructed by cubo-octahedral growth zones with a smooth faceted top surface and coarse side surfaces. The as-grown film possesses （100） dominant surface containing a little amorphous sp2 component, which is far different from the nano-crystalline film with the usual cauliflower-like morphology.     

垂直均匀射流下CPU散热器换热性能的数值分析

对垂直射流下CPU散热器的流场及温度场进行了数值模拟,得到了CPU散热器流场及温度场的分布规律,指出近底面肋片间存在回流区,明显影响传热。分析了CPU散热器在射流时不同情况下的散热性能,计算所得数据有助于CPU散热器的设计与改进。     

强激光干扰下运动目标热损伤效应的有限元研究

为对空中飞行目标实施合理有效的强激光干扰,需要综合考虑采用的干扰方式、干扰效果以及考虑光斑偏移对干扰效果的影响。以热传导理论为基础,建立了激光辐照下移动目标温度场模型,采用伽辽金法建立了有限元分析模型,采用了等效比热容的方法处理材料的相变过程;并以Ansys软件为仿真平台,对目标在高斯分布的强激光作用下的温度场和热应力进行了综合仿真分析。结果表明,光斑与目标辐照区域的相对偏移对目标表面温度影响较大,对目标纵深破坏效应相对较小,应力变化主要发生在激光辐照区域,应力最大处也会随热源的移动而变化。     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。     

激光辐照下旋转柱壳温度场的数值模拟

 采用有限元方法数值模拟在连续激光辐照下旋转柱壳温度场的变化和分布情况,并分析了热性能参数对温度场造成的影响,同时还比较分析了不同旋转频率对柱壳温度场分布的影响。结果表明,激光作用下旋转柱壳的温升大大低于静止柱壳的温升, 外表面温度呈现出与旋转频率相符的周期性上升过程,而内表面温升由于热传导的原因在较小频率下才表现出这种周期性,当频率增大到一定值时,内表面温升不出现周期性的台阶而是曲线上升。     

纵磁作用下真空电弧单阴极斑点等离子体射流三维混合模拟

真空电弧的特性直接受到从阴极斑点喷射出的等离子体射流的影响,对等离子体射流进行数值仿真有助于我们深入了解真空电弧的内部物理机制.然而,磁流体动力学和粒子云网格仿真方法受限于计算精度和计算效率的原因,无法有效地应用于真空电弧等离子体射流仿真模拟.本文开发了一套三维等离子体混合模拟算法,并在此基础上建立了真空电弧单阴极斑点...     

沉积温度对硬质合金表面沉积的SiC薄膜的影响

采用强电流直流伸展电弧等离子体CVD技术,以Ar、H2和四甲基硅烷(TMS)为先驱气体,在YG6硬质合金衬底表面制备了SiC薄膜。实验结果表明:随着沉积温度的升高,薄膜的致密性和平整度提高;但当沉积温度过高时,SiC薄膜的表面开始具有含非晶碳球和呈花瓣状的疏松结构。在合适的沉积温度下,SiC薄膜的致密性和平整度较好,且其具有较好的附着力和一定的强度,而这样的SiC薄膜可以阻止在金刚石涂层沉积过程中硬质合金中含有的Co对金刚石相沉积过程的有害作用。     

Improving the performance of all-solid-state supercapacitors by modifying ionic liquid gel electrolytes with graphene nanosheets prepared by arc-discharge

Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.