CVD Reactions of TiCl4 with Ammonia： a Quantum Chemical Study

Based on density functional calculations, the mechanism and the energetic course of the chemical vapor deposition （CVD） reaction of TiCl4 with NH3 were studied at the level of B3LYP with 6-311g（d） basis set. Furthermore, the polymerization processes of dimerization, trimerization and tetramerization were investigated. The calculation results indicate that the formation of polymers is favored at the elimination reaction. On the basis of the calculated energetics, a possible mechanism of the reduction reaction has been proposed.     

1，4-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-(1，4)合双铜(Ⅱ)配合物的合成、表征、非等温热分解反应动力学及电化学性质

The paper reported the synthetic procedure and character of Copper(Ⅱ) binuclear coordination compound of 1,4-bis-(1′-phenyl-3′-methyl-5′-pyrazolone-4′)-1,4-butanedione. The non-isothermal kinetic of the thermal decomposition of the complex has been studied from the TG-DTG curves by means of the Achar et al and Coats-Redfern methods. The electrochemical characterization of the complex were studied by means of powder microelectrodes technique.     

粗糙化银电极上氰基钴胺素的电化学行为

比较研究氰基钴胺素在光滑和粗糙化银电极上的电化学行为，发现在光滑银电极上氰基钴胺素的还原为一个二电子过程，而在粗糙化银电极上则为两个一电子过程，其原因是由于粗糙化银电极对氰根的强吸附作用。     

硫化物/Ru(II)络合物复合敏化TiO2纳米多孔膜

用光电化学方法研究了ＣｄＳ,ＰｄＳ和Ｒ１１Ｌ２（ＮＣＳ）２,（Ｌ＝２,２′－ｂｉｐｙｄｉｎｅ－４,４′－ｄｉｃａｒｂｏｘｙｌｉｃａｃｉｄ）复合敏化ＴｉＯ２纳米晶电极的光电化学行为,结果表明,采用复合敏化比用Ｒ１１（ＩＩ）络合物单独敏化ＴｉＯ２纳米晶电极效果好,大大提高了光电转换效率,主要原因是采用复合敏化,可防止ＴｉＯ２导带上由光注入产生的电子的反向转移,避免了电子的损失。     

电化学方法对两性接枝星形聚合物LB膜屏蔽效应的研究

本文将自制Y式玻碳电极拉上两性接枝星形聚合物(GPSMA)的LB膜,用循环伏安法研究谈膜的屏蔽效应,讨论了接枝量、成膜条件等对膜缺陷的影响,并提出了减少缺陷的办法。     

电化学方法研究I3^—和Ti^3＋在铂上的异相催化

用电化学方法研究了Ｉ－３和Ｔｉ３＋在还原铂表面上的电极反应，由此计算出Ｉ－３与Ｔｉ３＋在还原铂表面上的混合催化反应速率（νｍｉｘ）．当混合催化电位（Ｅｍｉｘ）位于极限电流区时，νｍｉｘ对［Ｔｉ３＋］为零级反应，对［Ｉ－３］为一级反应，且正比于电极旋转速率的平方根，Ｈ＋浓度影响不大．由动力学方法研究的结果证实了电化学研究结果的正确性，致使可用电化学方法解释溶液中的异相催化问题     

蛋白质直接电化学研究及其应用

蛋白质直接电化学研究在生物电化学中具有重要地位,对于蛋白质结构-功能研究、蛋白质电子传递过程的热力学和动力学研究都有着重要意义,而且是研制第三代电化学生物传感器的基础.本文对在裸电极、分子自组装修饰电极和模拟生物膜修饰电极上进行蛋白质直接电化学的研究及相关应用进行简要综述.     

掺杂Y^3+的锂锰尖晶石的合成及其电化学性能研究

采用流变相反应法合成了掺杂稀土钇离子的锂锰尖晶石LiYxMn2-xO4，并对其 结构和电化学性能进行了初步研究。结果表明，当掺入的Y^3+的含量较低（x≤0. 02)时，得到的产物能保持完整的尖晶石结构，并表现出极佳的电化学性能。Y^3+ 的掺入使材料的循环稳定性能大幅度提高，而这种提高是源于Y^3+对尖晶石结构的 稳定作用。电极材料LiY0.02Mn1.98O4显示了最优的电化学性能，在0.2℃放电速率 下，其初始放电容量为118mA·h·g^-1，100次循环后仍能保持初始容量的98％。     

[Co（H2o）4（NCS）2]（18—C—6）的薄层光谱电化学研究

利用光谱电化学方法来研究冠醚类化合物的文章尚未见报导.本文在测定用凝胶法合成的[Co(H_2O)(NCS)_2](18-C-6)的核磁共振谱和红外光谱的基础上,使用循环伏安法和薄层光谱电化学技术,在金微栅电极上测定了此配合物在乙腈溶剂中的第一步克式量电势(E~0′)和电子转移数(n),并推测了电还原反应机理.     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.