Effect of film thickness manganite-based on interfacial barrier of heterojunctions

Interracial barrier is a key factor that determines the performances of heterojunctions. In this work, we study the effect of manganite film thickness on the effective interracial barrier for La0.67Sr0.33MnO3/Nb：SrTiO3 junctions, The barrier is extracted from the forward current-voltage characteristics. Our results demonstrate that the barrier decreases gradually from -0.85 eV to -0.60 eV when the film thickness decreases from 150 nm to 2 nm. The overall value of the barrier is only about 50% of the corresponding one determined from the photovoltaic effect.     

Artificial neural network method for determining optical properties from double-integrating-spheres measurements

<正>Accurate measurement of the optical properties of biological tissue is very important for optical diagnosis and therapeutics.An artificial neural network(ANN)-based inverse reconstruction method is introduced to determine the optical properties of turbid media,which is based on the reflectance(R) and transmittance (T) of a thin sample measured by a double-integrating-spheres system.The accuracy and robustness of the method has been validated,and the results show that the root mean square errors(RMSEs) of the absorption coefficientμ_a and scattering coefficientμ'_s reconstruction are less than 0.01 cm~(-1) and 0.02 cm~(-1),respectively.The algorithm is not only very accurate in the case of a lower albedo(~0.33),but also very robust to the noise of R and T especially for theμ'_s reconstruction.     

基于图像亮度特性统计的水下距离选通成像自动增益控制方法

对水下激光距离选通成像质量与系统增益的关系进行了分析,提出了一种基于图像亮度特性统计的普适性自动增益控制方案。该方案通过设定不同灰度统计阈值,甄别目标图像的亮度特性,并以此作为控制系统增益的主要依据。在对水下大动态范围照度目标或慢速运动目标等进行成像的特殊场合,该方案也具备较强的适用性,能实时反馈控制系统增益,使成像质量优化。     

Chaotic dynamics of active optical fiber ring resonator with optical injection

We experimentally obtain the route from period doubling to chaos in an active optical fiber ring resonator （AOFRR） with optical injection. The results show that the AOFRR is sensitive to external optical injection and demonstrate various dynamic characteristics. Meanwhile, the change of the injection strength can cause the output of the AOFRR to become periodic or chaotic. It can be confirmed that all the dynamic characteristics of the system are due to the interaction of the semiconductor laser with the erbium-doped fiber amplifier （EDFA）.     

利用反射与透射光谱测量GaN外延层的光学参数

GaN是一种理想的紫外发光和探测材料,其光学特性参数是光学器件设计的重要依据。采用紫外反射与透射光谱相结合的方法对国产GaN外延层进行光学特性测量,利用反射率与折射率之间的关系和薄膜干涉效应,建立了GaN外延层厚度、表面反射率、光谱吸收系数的光谱测量公式。测量结果表明,GaN外延层在紫外波段存在三个吸收区,其中364nm以下波段为强吸收区,吸收系数接近10^5cm^-1,364～375nm为吸收过渡区,375nm以上波段为弱吸收区;GaN表面反射率在三个吸收区的变化不大,为0．2～0．25之间。     

SrF2-CaF2混合物薄膜的物理及红外光学特性研究

采用热蒸发和电子束蒸发两种沉积方式分别沉积了相同厚度的SrF₂-CaF₂ (比例为1∶1) 的混合物薄膜,对其物理和光学特性进行了研究,并定量地给出了其在红外波段的光学常数,填补了这一数据的空白. 同时提供了一种获得不同低折射率薄膜的方法.文中还以该比例的混合物作为低折射率材料,研制出具有很好的光学性能的长波红外宽光谱增透膜.     

基于锗硅芯片的光电子学前景与挑战

作为微电子材料,硅具备许多优良的电学特性．采用硅材料的器件集成度能够比其他材料高几个数量级。然而．硅是一种间接带隙材料,其光学跃迁过程会引入大量低能的声子造成跃迁几率很低．导致其光学特性（发射与吸收）远不如Ⅲ/Ⅴ族半导体材料。     

镁合金电子结构与腐蚀特性研究

采用递归法计算了镁合金电子结构.研究发现Mg的态密度在晶内与表面接近,当表面有氧或氢氧时态密度形状改变很大,因此Mg在晶内、表面性质是接近的,但当合金表面渗透氧或氢时,合金性质有明显变化.Al,Y,La三种元素在晶体表面的掺杂原子镶嵌能均低于各自在晶内的掺杂原子镶嵌能,Al, Y, La从晶内向晶体表面扩散、并在合金表面偏聚.Al-O, Y-O, La-O, Mg-O及Mg-O-H间的亲和能均为负数,这些原子间存在亲和力,可以在合金中相互作用形成化合物.由于Mg-O-H间的亲和能远低于Mg-O的亲和能,因此Mg(OH)₂比MgO更稳定.氧化初期氧与Mg, Al, Y, La等生成氧化物,当合金与腐蚀介质接触时,MgO与腐蚀介质中的水发生反应生成Mg(OH)₂.Al₂O₃,（Y,La）₂O₃及Mg(OH)₂能对合金起到保护作用,提高合金的耐腐蚀性能.     

脉管制冷机内流场与温度场的时空特性

为了进一步探究脉管制冷机内部流场与温度场的复杂时空特性,采用数值模拟方法,详细研究和分析了基本型、小孔型和双向进气型脉管制冷机的关键部件—回热器和脉管组件内流场与温度场的时空变化持性,得到了相应的时空分布图,有助于直观地理解回热器与脉管组件内热力参数的动态变化情况。与此同时,通过分析小孔阀和双向进气阀对脉管冷热端温度波动的影响规律,进一步指出:小孔阀和双向进气阀均会导致脉管冷热端的温度波动,且小孔阀造成的温度波动幅度要大于双向进气结构,因此,小孔阀是导致脉管冷热端温度不规则变化的主要因素。     

Sound absorption characteristics of a thin plate with PZT and shunt circuit I. Theoretical analysis

The feasibility of sound absorbing by a vibrating plate with piezoelectric material and shunt circuits is theoretically investigated. Based on an equivalent compliance of a piezoelectric wafer shunted with RL circuits, the governing equations for the fiexural vibration of the plate with the piezoelectric wafer are derived using Lagrange＇s approach. The equations take into account not only the mass, stiffness and structural damping of the plate and the wafer, but also the electrical resistance and electrical inductance of the RL circuits. By using the governing equations derived, the surface impedance and sound absorption coefficient of the plate backed with a cavity are given. Numerical results show that the sound absorption coefficient of the plate near its first mode can be significantly improved by adjusting the RL parameters.