Studies on Synthesis and properties of Mg-Al-nitrate Layered Ouble Hydroxides

A positive Mg-Al-nitrate layered double hydroxides(LDHs) has been synthesized using a non-steady coprecipitation method.The shape.size,chemical composition,electrical property and anion exchange property of the positve nanoparticle were studied by SEM,XRD,FTIR,chemical analysis,spectroanalysis and meaxsuring of electrophoretic mobilities.Preliminary results show the positive nanoparticle is a promising precursor of polymer/LDHs nanocomposite.     

高应变率下U-Nb合金的断裂组织特征

利用内部爆炸加载方法对U-Nb合金进行爆破试验，对爆破试验产生的破片进行回收，并对U-Nb合金破片进行一些微观检测分析，从而初步研究在爆炸加载下U-Nb合金的微观断裂机制。     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.     

辐射加热金X光再发射时间测量

利用星光Ⅱ三倍频激光打双盘靶，研究了辐射加热材料的Ｘ光发射时间。激光脉冲能量４０～６０Ｊ、脉冲宽度６００～７００ｐｓ。通过两台时间关联的亚千Ｘ光能谱仪分别监测双盘靶初、次级发射Ｘ光谱，给出了辐射加热次级Ｘ光再发射时间。     

模拟纳米晶体原子分布及X射线散射理论图案

通过分子动力学方法模拟纳米晶体（1—3nm）的结构．利用模拟的结果，进行了X射线衍射及径向分布函数的模拟计算．结果表明：纳米晶体晶界呈短程有序，界面原子间距分布很宽；随着晶粒尺寸的减小，晶粒的畸变越大，原子体积常数也明显增大 关键词：     

SiC多型体X射线定量分析的Rietveld方法

鉴于ＳｉＣ多型体的主要衍射线完全重叠，用常规Ｘ射线粉末衍射方法确定ＳｉＣ陶瓷材料中多型体含量的分布是非常困难的，提出以Ｘ射线粉末衍射全谱拟合的Ｒｉｅｔｖｌｄ方法进行ＳｉＣ多型体定量分析，阐述了原理及方法，对含３Ｃ，４Ｈ，６Ｈ和１５Ｒ４种多型体衍射数据的定量分析结果表明，Ｒｉｅｔｖｅｌｄ方法可对ＳｉＣ材料中常见多型体的定量分析给出准确的结果，还给出了各自的标准偏差，并估计了该方法对各多型体能给出精确     

黑洞的观测证认

介绍了Ｘ射线双星中的黑洞和星系核心的黑洞的观测证认状况．     

非线性控制系统的最小实现

对于那些由代数微分方程描述的具有输入输出关系的非线性控制系统，本文采用两种方法讨论了其最小实现问题：一种方法是直接计算系统的特征列；另一种方法则采用了本原元定理．两种方法给出的最小实现所需的状态变量最小数目是相等的．文中的大量代数与微分运算则可利用数学机械化来完成     

线性常微分方程组解的特征数的估计

复数域上线性系统ｘ＝Ａ（ｔ）ｘ，当Ａ（ｔ）＝（ａｉｊ（ｔ））ｎ×ｎ具有（ｎ，Ｎ，ｒ） 差异性质且ｒｎ时，解的特征数ｊ有估计λｊ－ｌｉｍｔ→∞１ｔ∫ｔｔ０Ｒｅａｊ（τ）ｄτｎ－１ｒ＋１－ｎｌｉｍｔ→∞１ｔ∫ｔｔ０Ａ（τ）ｄτ，ｊ＝１，２，…，ｎ，其中Ａ（ｔ）＝ｍａｘ｛｜ａｉｊ（ｔ）｜：ｉ，ｊ＝１，２，…，ｎ，ｉ≠ｊ．｝