K/Ru(10ī0)表面上的CO-4a1轨道对称性确定

用同步辐射角分辨偏振紫外光电子谱对Ｋ／Ｒｕ（１０１０）面上吸附分子轨道的对称性测量发现：结合能在１１、．２ｅＶ的ＣＯ－４ａ１（４σ）分子轨道对ｓ偏振光（在沿〈１２１０〉的人射面）是禁戒的。结果表明由于Ｋ的强烈影响,ＣＯ的分子轨道重新排列（ｓＰ＾２杂化）。依据选择定则和分子轨道的对称性６说明,ｓｐ＾２再杂化的ＣＯ分子吸附的桥位取向是〈１２１０〉晶向。     

Synthesis of Pharmaceutical Intermediates by Toluene Benzylation over Heteropoly Acids on Different Support

Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyl- diphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay (K-10, montmorillonite), plane H-Beta, plane MFI structured titanosilicate (TS-1) and heteropoly acids [HPA, namely dodeca-tungstophosphoric acid [H3PO4.12WO3.xH2O] (TPA), dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3O40P aq] (DMAA), sodium tungstate hydrated purified [Na12WO4.2H2O] (STH)] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-l, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.     

咪唑类化合物-CuCl络合催化剂在甲醇氧化羰基化反应中的催化性能

研究了咪唑及其衍生物配合CuCl对甲醇液相氧化羰化合成碳酸二甲酯的催化性能。筛选出溶解性好、腐蚀性小且催化活性高的多功能助催剂。实验结果表明，反应体系中加入N-甲基咪唑后，CuCl可以完全溶解。当催化剂的浓度为0.2 mol/L, N-甲基咪唑与CuCl的量为4∶1，反应温度为120 ℃，反应压力为2.40 MPa，CO与O2的进气比2∶1，反应3 h的条件下甲醇的摩尔转化率为15.4%，选择性为98%以上。从腐蚀性试验结果看，50 ℃时，加入N-甲基咪唑化合物后，Q235钢在CuCl/CH3OH/H2O/CO/O2体系中的腐蚀速率为0.22mm/a，缓蚀效率为94.5%。动力学研究表明，反应近似为一级，加入N-甲基咪唑后，反应速率常数为0.15 min－1。     

α-烃基戊二酸酯的简便合成法

α-烷基戊二酸二乙酯是合成天然香料3-烷基-1,2-环戊二嗣的重要中间体[1]。虽然,α-甲基戊二酸二乙酯可由丙二酸二乙酯与α-甲基丙烯酸酯进行 Michael 加成,再经水解、脱羧和酯化制得,但有关其它烃基取代的α-烃基戊二酸二乙酯报道甚少。这可能由于其它α-烷基取代的丙烯酸酯不如α-甲基丙烯酸酯易于获得。也有报道利用烷基取代的丙二酸二乙酯与丙烯醛进行 Michael 加成,继而经氧化、水解、脱羧或利用烷基取代的乙酰乙酸乙。酯与丙烯腈进行 Michael 加成,再经腈的水解和羰基的裂     

Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

Synthesis and Characterization of p—[Perfluoro—1—（2—fluorosulfonylethoxy）]ethylated Polystyrene

A new fluorinated polystyrene bearing a p-sulbstiuted perfluoro[1-(2-fluorosulfonylethoxy)]ethyl group was synthesized via one-electron oxidation of polystyrene by perfluoro[2-(2-fluorosulfonylethoxy)]propionyl peroxide at different peroxide to polystyrene molar ratios.The yield of perfluoroalkylation decreases with the increase of the reactant molar ratio.The modified polymer has been characterized by various techniques:the ring pefluoro[1-(2-fluorosulfonylethoxy)]ethylation has been proved by FT-IR and ^19FNMR;the X-ray photoelectron spectra(XPS) show the maximum binding energy of F18,O18,C18(two kinds of carbon atoms,namely C-H and C-F)and S2p,respectively; desulfonylation of the fluorinated polystyrene appearing at 217℃ has been found by its thermogravimetric analysis (TGA).The determinations of contact angle,refractive index and glass transition temperature of the modified polymer have disclosed that when the contact angle increases with the increase of the molar ratio,the refractive index and glass transition temperature decrease.The polydispersity values indicate that the degradation of the polymer chains did not occur during the reaction.     

几道高考化学史试题赏析及思考

新课程的实施,为重新审视学科科学史的教育价值提供了契机。通过几道高考化学史试题的赏析,探讨了编制化学史习题的几点注意点。     

高分子量聚L-乳酸热降解回收L-丙交酯

本文综述了高分子量聚L-乳酸(Poly(L-lactide), PLLA)经热降解直接回收L-丙交酯的研究进展。纯PLLA的热降解为无规反应,经添加金属类催化剂后,PLLA则可获得以L-丙交酯为主的热降解产物。本文介绍了聚乳酸热降解的反应机理,详细阐述了添加的金属催化剂的种类,及其催化PLLA热降解生成L-丙交酯及发生消旋化作用的机理。经PLLA热降解直接回收L-丙交酯技术的研究,可缩短PLLA再循环使用周期,既降低生产成本,又充分利用资源,达到促进发展循环经济的目的。     

线型脲醛树脂的半结晶模板化作用

酸性条件下硅溶胶体系中尿素和甲醛聚合反应会产生脲醛树脂-氧化硅杂化沉淀. 沉淀的质量随有机组分比例的增加而增加, 当尿素和甲醛物质的量比≥1.0时生成沉淀的量为恒定最大值. 红外分析表明杂化材料在3348, 1635, 1572和784 cm^－1处产生了可被归结为线型结构(—[NHCONHCH₂]_n—)的特征吸收. XRD分析表明这种线型分子可形成氢键(C＝O…H—N)导向型的半结晶. 微分热重和XRD结果证明结晶物种在290 ℃完全分解. SEM表征显示半结晶杂化沉淀以三维网络结构为特征, 具有层状结晶的各向异性, 其初级粒子即使在室温下干燥也容易开裂. 随着反应时间的延长、酸性的增加或无机组分量的相对增加杂化粒子变得更加致密. 液氮吸附结果证明沉淀焙烧后所得氧化硅材料的结构具有层状孔结构性质, 其比表面积、孔尺寸和孔体积可以达到510 m²/g, 14.3 nm和1.68 cm³/g. 改变反应体系的酸性和反应组分配比等条件可以方便地控制杂化材料的结构.     

十八烷基超支化分子的结构表征与破乳性能

以甲醇为溶剂,用十八胺、丙烯酸甲酯和乙二胺为原料,通过迈克尔加成反应和酰胺化缩合反应,制备了1.0 G超支化分子;通过红外光谱、核磁共振手段对合成产品的结构进行了表征,且考察了十八烷基超支化分子对O/W型原油模拟乳液的破乳性能,并与传统的线性破乳剂SP-169进行了对比.结果表明:在温度为50℃、添加量为20 mg/L、破乳时间为120 min的条件下,其脱水率达到了76.2%,脱出水中的含油量为41.9 mg/L;而破乳剂SP-169在相同的条件下的脱水率为61.5%,脱出水中的含油量为52.4 mg/L.