激光标线的原理和实验

根据几何光学知识分析了激光标线原理.理论和实验表明:激光标线长度与激光光束形状、光学元件形状及材料折射率有关.并讨论了激光标线向两侧扩展的原因.     

利用空问诱导色散补偿介质色散

研究了超短脉冲贝塞尔光束在色散介质中的传输特性，指出空间诱导色散效应可以用来补偿介质色散作用，从而可以在色散介质中实现无衍射无色散的类时空孤子波的传输。用理论推导和数值模拟的方法得到的具有反常色散性质的空间诱导色散可以有效地补偿介质色散。数值模拟的结果表明，由于超短脉冲贝塞尔光束的无衍射无色散传输距离受到高阶色散效应和贝塞尔光束空间受限两方面的限制，无衍射无色散传输只能在有限距离内近似实现。通过增加脉冲长度可以减小高阶色散效应的影响。在传输距离小于衍射距离时，空间诱导色散效应可以很好地描述脉冲演化和色散补偿过程。     

Residual stress profiling of an aluminum alloy by laser ultrasonics

A residual-stress profile along the thickness of an aluminum alloy sheet is determined by laser-ultrasonic technique. Surface acoustic waves are generated by a Nd:YAG pulse laser and detected by a Heterodyne interferometer on a lateral free surface of the sheet. The distribution of residual stress is determined by measuring the relative variation of the wavevelocities at different location of the sample along its thickness. This technique is validated by three different residual stress profiles obtained experimentally.     

核物理与等离子体物理——核物理与等离子体物理学科研究进展

编制了一个新的三维光路程序，可以计算任意方向的光线通过网络的轨迹，程序将更准确地模拟真实激光光束在柱型腔靶中的三维传播。设计了平板、球体、柱体等几何体计算模型，通过一系列的检验和考察，证明了程序计算的光路轨迹的可靠性。     

Fabrication of Long-Period Fibre Gratings Using 800 nm Femtosecond Laser Pulses

Long-period fibre gratings inside standard single-mode optical communication fibres are successfully fabricated with infrared femtosecond laser pulses. The refractive index perturbations are well confined within the fibre core by choosing the proper laser focusing parameters and translation speed of the fibre during the direct laser writing process. With the self-focusing effect considered and at a constant average irradiation dose of 1.62 × 10^3 J/（cm^2μm）, the threshold intensity for fabricating long-period gratings with infrared femtosecond laser pulses is determined to be 5.13 × 10^13 W/cm2.     

激光介质的多次吸收不均匀内热源模型

针对激光介质的内热源,以多次吸收作用为基础提出了适用于侧面双向泵浦板状激光介质的不均匀内热源模型,即多次吸收不均匀内热源模型,并与均匀内热源和一次吸收内热源模型进行了对比分析。研究表明,介质厚度及光吸收系数组成的无量纲参数不同时,三种内热源模型得到的内热源分布也有所不同。最后给出了内热源不均匀度及多次吸收模型与一次吸收模型之间的差异在不同目标值下的内热源模型适用准则。     

激光磁共振用于对NO_2分子的定量测量

本文叙述了采用CO激光磁共振方法对NO_2分子作定量测量,给出了激光磁共振信号幅度的数学表达式以及信号与分子浓度、激光功率等实验参数之间的依赖关系,实验结果与理论分析一致。     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

脉冲激光偏振方向对氮分子高次谐波的影响——基于含时密度泛函理论的模拟

采用含时密度泛函方法,结合赝势模型和电子交换相关作用的广义梯度近似,模拟了氮分子在超强飞秒激光脉冲作用下的高次谐波产生现象,并研究了激光脉冲偏振方向对氮分子高次谐波的影响.结果表明氮分子的高次谐波谱具有典型原子谐波谱的特征;谐波谱强度随着θ(激光偏振方向与分子轴向夹角)的增大而减小.这与J.Itatanl在Nature上报道的实验结果基本一致.