平面旋转场诱导下磁流变液的结构模型

针对平面旋转场下磁流变液中诱导产生的层状结构 ,提出了恰当的理论模型 ,该模型成功的解释了层状结构在同步旋转状态下 :层间距随磁场的变化关系 ;旋转层的滞后角随旋转角频率以及其他物理量之间的关系 ;层半径与旋转角频率之间的关系 .理论结果与文献中发表的实验结果相吻合     

用辉光放电发射光谱对镀锌铁板钝化防护层的逐层分析

本文应用辉光放电发射光谱分析技术，以纯金属作标样，对几种用不同工艺处理的镀锌铁板钝化防护层进行逐层定量分析。得到了镀锌板中锌、铁的含量随浓度变化的曲线，取得了满意的分析结果，为铁板镀锌钝化防护层的工艺研究提供了可靠的依据。     

短脉冲载荷下金属材料的层裂破坏

 本文用点炮加载聚酯薄膜飞片撞击金属靶材料，飞片速度0.714~2.24 km/s，脉冲宽度40~80 ns，击靶压力为2.280~11.952 GPa。在回收的铝、铜和钢靶样品上观察到层裂现象。通过金相分析发现它们的破坏方式与在一般较长脉冲加载下的破坏方式相似，铝和铜以延性方式破坏；钢则以脆性方式破坏。一维和二维数值模拟结果表明通常的几种层裂判据在这个应力、应变和应变率范围内也基本上适用。     

高压下液态Ag-20 at%Ge合金的凝固及密排六方亚稳相的形成

 利用高压淬火方法，在液态Ag-20at%Ge合金的凝固过程中，对比液态急冷低四个数量级的冷却速率得到了单相密排六方结构亚稳相，其点阵参数为a=0.289 8 nm，c=0.470 8 nm，c/a=1.625。     

High-Density Read-Only Memory Disc with Ag11In12Sb51Te26 Super-Resolution Mask Layer

A novel read-only memory (ROM) disc with an Ag11ln12Sb51Te26 super-resolution mask layer is proposed and investigated for the first time to our knowledge. The carrier-to-noise ratio of more than 40 dB could be obtained from small pits (380nm), which are below the readout resolution limit (400nm), in our dynamic setup with a wavelength of 632.8 nm and numerical aperture of 0.40. Dependences of carrier-to-noise ratio on readout power,readout velocity and film thickness are studied. The results show that the optimum film thickness is 20-50nm and the corresponding carrier-to-noise ratio is more than 40dB at readout power of 4mW and readout velocity of 2m/s in our experiment. The super-resolution readout mechanism for this ROM disc is also discussed.     

丹聂耳电池电动势产生的机理

 1836年,英国化学家丹聂耳(Daniell)发明了一种原理上最简单的化学电池,通常称之为丹聂耳电池。电动势是化学电池的一个重要的性能参数。而电动势等于单位正电荷由负极通过电池内部移到正极时电池内非静电力(化学力)所做的功。它取决于电极材料的化学性质,与电池的大小无关。因此,本文就从物理化学角度来探讨丹聂耳电池电动势产生的机理。丹聂耳电池的结构如图1所示。电池的两个电极锌板和铜板分别浸在ZnSO₄溶液和CuSO₄溶液中。     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.