CO分子结点电子结构和输运性质的第一原理研究

采用基于密度泛函理论(DFT)的非平衡态格林函数方法(NEGF), 计算了CO分子结点低偏压下的电流和电导. 通过系统透射谱、投影态密度(PDOS)以及分子自洽投影哈密顿量(MPSH)本征态的分析将透射通道与局域分子轨道联系起来, 从系统电子结构解释了其传输性质. 讨论了电荷转移对系统电导的影响.     

虚构的法拉第定律与几个关键实验不符

由于法拉第定律是虚构,所以它不具有普适性,感应电流的产生与磁通量变化率无关,产生感应电流的物理本质是完整洛伦兹磁力。     

Synthesis and photocatalytic properties of core–shell TiO~2@ZnIn_2S_4 photocatalyst

A novel core–shell TiO2@ZnIn2S4composite has been synthesized successfully by a simple and flexible hydrothermal route using TiO2as precursors.The as-synthesized samples were characterized by X-ray diffraction,UV–vis diffuse reflectance spectra and transmission electron microscopy.The photocatalytic properties of samples were tested by degradation of aqueous methylene blue（MB）under visible light irradiation.It was found that the as-synthesized TiO2@ZnIn2S4photocatalyst was more effcient than TiO2and ZnIn2S4in the photocatalytic degradation of MB.Moreover,TEM images confrmed the TiO2@ZnIn2S4nanoparticles possessed a well-proportioned core–shell morphology.     

Nd:YAG晶体板条低透射波前误差加工技术北大核心CSCD

针对高平均功率固体激光器对Nd:YAG晶体板条的技术需求,进行了Nd:YAG晶体板条低透射波前误差加工技术研究。详细分析了光学加工过程中引起板条端面透射波前畸变的误差来源,并提出工艺技术解决方案。实验结果表明,在板条抛光阶段通过采用合成盘硬抛光工艺以及新的工件装夹技术,能够解决传统板条加工工艺在面形及楔角精度方面可控性差的问题,更容易实现Nd:YAG晶体板条的低透射波前误差加工。对于150mm×30mm×2.5mm规格的Nd:YAG晶体板条元件,端面透射波前畸变PV值达到0.74λ。     

有序排列PMMA 模板法合成三维有序纳米孔道MgO

"利用由无乳化剂的乳液聚合法和水浮法联用技术合成得到的有序排列的聚甲基丙烯酸甲酯(PMMA)微球为硬模板,以硝酸镁为镁源,并采用硝酸镁-柠檬酸-乙醇混合溶液浸渍PMMA微球后经干燥以及先后在300 ℃恒温灼烧3 h和500 ℃恒温灼烧5 h,制备出具有有序纳米孔道结构的MgO粒子．应用X射线衍射、高分辨扫描电子显微镜、透射电子显微镜/选区电子衍射以及N2吸附-脱附法等技术表征了PMMA和MgO样品的物理化学性质．结果表明,所得PMMA微球颗粒较为均匀,粒径约为284 nm,且排列规整有序．由PMMA硬模板     

电子束敏感材料的原子尺度结构研究

分子筛和金属有机骨架(MOF)材料以其独特的孔道和骨架结构在催化、 储能、 干燥及净化和吸附分离等领域有着广泛应用, 对其结构的原子尺度表征对于深入理解其构效关系具有重要意义. 但其大孔道结构和有机骨架使得它们对电子束辐照极为敏感, 在常规透射电镜成像模式下结构会很快被破坏变为非晶, 从而无法获得孔道和骨架的原子排列信息. 最近发展起来的基于积分差分相位衬度扫描透射电子显微(iDPC-STEM)技术在电子敏感材料和轻元素组分成像方面展现出明显优势, 使得对多孔骨架材料及烃池物种的表征成为了可能. 本文综述了本课题组近期利用该技术对分子筛和MOF材料原子尺度结构方面的研究. 将iDPC-STEM技术应用到ZSM-5分子筛催化剂中, 实现了对该分子筛的原子级骨架结构的成像分析. 在MOF体系中, 利用该技术观察到MIL-101骨架内部有机连接体与金属节点的配位方式, 在此基础上解析了MIL-101结构中有机配体的连接和金属节点的苯环结构, 并观察了MOF的原子级表面、 界面和缺陷等局域结构特征. 最后对iDPC-STEM技术在原子尺度成像方面的应用潜力进行了总结与展望.     

探讨周期性结构障碍物的声传播和透射

构建了具有周期性结构的一维狭缝障碍屏,用Comsol Multiphysics模拟计算,在较长波段内讨论声波的透射现象.并改变障碍屏的参数,对比不同情况下的声透射,在理论上分析声波的传播过程和透射特征,对照和分析通过Comsol Mul-tiphysics计算的透射谱,说明了声波透射峰的起源和异常透射现象.     

TDX-200TEM物镜磁路缺陷对物镜性能影响研究

基于TDX-200透射电子显微镜(Transmission Electron Microscope,TEM),利用ANSYS软件仿真物镜磁路存在空隙、凹陷、凸起缺陷时物镜轴上的磁场分布,在此基础上利用MEBS软件仿真物镜激励、球差系数等性能参数,分析了各磁路缺陷对物镜分辨率的影响。结果表明,在相同加速电压下,相对于空隙缺陷、凸起缺陷对物镜分辨率的影响,凹陷缺陷对物镜分辨率的影响最大。在200k V加速电压下,当物镜存在直径为0.5mm的半圆形凹陷环缺陷时,实际分辨率相对于理想分辨率的变化量可达到9.68%。     

Study of In Situ Formation of Magnesium Hydroxide Whisker via Basic Magnesium Chloride Whisker Regulated by Organic Parcels at Low Temperature

In this work, we demonstrate an in situ phase conversion from basic magnesium chloride（BMC） into magnesium hydroxide whisker by using polar organic solvent at low temperature. The morphology and phase composition of magnesium hydroxide whiskers prepared at different reaction temperature, alkali concentration and organic solvent were analyzed by X-ray diffraction（XRD） and scanning electronic microscope（SEM）. It was found that when one of the organic solvents such as absolute ethyl alcohol, butanol, polyethylene glycol（PEG-400）, acetone, et al. was selected as the template, the precursor BMC can transform into whisker-like magnesium hydroxide through precipitate transformation in low temperature and non-hydrothermal system. It can be reasonably explained that the regulation of Mg^2＋ solubility by those organic solvents and the sustained release of Mg^2＋ dissolution by organic adsorption played a significant role in the formation of magnesium hydroxide whisker via BMC whisker as the precursor.     

Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.