Novel correction method for X-ray beam energy fluctuation of high energy DR system with a linear detector

A high energy digital radiography (DR) testing system has generated diverse scientific and technological interest in the field of industrial non-destructive testing. However, due to the limitations of manufacturing technology for accelerators, an energy fluctuation of the X-ray beam exists and leads to bright and dark streak artifacts in the DR image. Here we report the utilization of a new software-based method to correct the fluctuation artifacts. The correction method is performed using a high pass filtering operation to extract the high frequency information that reflects the X-ray beam energy fluctuation, and then subtracting it from the original image. Our experimental results show that this method is able to rule out the artifacts effectively and is readily implemented on a practical scanning system.     

Single-material guided-mode resonance filter for TE waves under normal incidence

<正>A guided-mode resonance(GMR) filter with the same material(Ta_2O_5) for both the grating layer and the waveguide layer is designed and fabricated.This simple structure is easy to fabricate and can avoid the defects at the grating/waveguide interface using different materials.The spectral response measured with a Lambda 900 spectrophotometer under normal incidence for TE waves exhibits a peak reflectance exceeding 80%at the wavelength of 1040 nm with a full-width half-maximum(FWHM) linewidth of 23 nm.We evaluate the deviations of the fabricated structure from the designed parameters.     

Effective Action for Noncommutative U（1） Gauge Theory with Higher Dimensional Terms

In this paper we apply the assumption of our recent work in noncommutative scalar models to the noncommutative U（1） gauge theories. This assumption is that the noneommutative effects start to be visible continuously from a scale ANC and that below this scale the theory is a commutative one. Based on this assumption and using background field method and loop calculations, an effective action is derived for noncommutative U（1） gauge theory. It will be shown that the corresponding low energy effective theory is asymptotically free and that under this condition the noncommutative quadratic IR divergences will not appear. The effective theory contains higher dimensional terms, which become more important at high energies. These terms predict an elastic photon-photon scattering due to the noncommutativity of space. The coefficients of these higher dimensional terms also satisfy a positivity constraint indicating that in this theory the related diseases of superluminal signal propagating and bad analytic properties of S-matrix do not exist. In the last section, we will apply our method to the noncommutative extra dimension theories.     

Theoretical Study and NBO Analysis of the Decomposition Kinetics of Oxetane, 2-Methyloxetane and 2,2-Dimethyloxetane

A theoretical study of the thermal decomposition kinetics of oxetane (1), 2-methyloxetane (2), and 2,2-dimethyloxetane (3) has been carried out at the B3LYP/6-311+G**, B3PW91/6-311+G**, and MPW1PW91/6-311+G** levels of theory. The MPW1PW91/6-311+G** method was found to give a reasonable good agreement with the experimental kinetics and thermodynamic parameters. The decomposition reaction of compounds 1～3 yields formaldehyde and the corresponding substituted olefin. Based on the optimized ground state geometries using MPW1PW91/6-311+G** method, the natural bond orbital (NBO) analysis of donor-acceptor (bond-antibond) interactions revealed that the stabilization energies associated with the electronic delocalization from σC3-C4 bonding to σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. The σC3-C4→σO1-C2 resonance energies for compounds 1～3 are 2.63, 2.59 and 2.45 kcal mol-1, respectively. Further, the results showed that the energy gaps between σC3-C4 bonding and σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. Also, the decomposition process in these compounds are controlled by σ→σ* resonance energies. Moreover, the obtained order of energy barriers could be explained by the number of electron-releasing methyl groups substituted to the Csp3 atom (which is attached to oxygen atom). NBO analysis shows that the occupancies of σCsp3-O bonds decrease for compounds 1～3 as 3<2<1, and those of σCsp3-O bonds increase in the opposite order (3 > 2 > 1). This fact illustrates a comparatively easier thermal decomposition of the sCsp3-O bond in compound 3 compared to compound 2, and in compound 2 compared to compound 1. NBO results indicate that these reactions are occurring through a concerted and asynchronous four-membered cyclic transition state type of mechanism.     

Non-contact evaluation of the resonant frequency of a microstructure using ultrasonic wave

This paper presents a novel non-contact method for evaluating the resonant frequency of a microstructure, Firstly, the microstructure under test is excited by ultrasonic waves. This excitation method does not impose any undefined load on the specimen like the electrostatic excitation and also this is the first actual use of ultrasonic wave for exciting a microstructure in the literature. Secondly, the amplitudes of the microstructure are determined by image edge detection using a Mexican hat wavelet transform on the vibrating images of the microstructure. The vibrating images are captured by a CCD camera when the microstructure is vibrated by ultrasonic waves at a series of discrete high frequencies （〉30 kHz）. Upon processing the vibrating images, the amplitudes at various excitation frequencies are obtained and an amplitude-frequency spectrum is obtained from which the resonant frequency is subsequently evaluated. A micro silicon structure consisting of a perforated plate （192 × 192 μm） and two cantilever beams （76 × 43 μm） which is about 4 μm thickness is tested. Since laser interferometry is not required, thermal effects on a test object can be avoided. Hence, the setup is relatively simple. Results show that the proposed method is a simple and effective approach for evaluating the dynamic characteristics of microstructures.     

一种GNSS/SINS容错深组合导航系统设计

卫星惯性深组合导航技术是卫星惯性组合导航领域最有前景的技术之一。深组合导航系统的关键技术之一就是矢量跟踪环路技术,当一个或者多个通道信号质量较差时,组合导航滤波器必然会受影响,从而会影响矢量跟踪环路的参数计算,因此通道运行状态的实时检测十分必要。针对此问题,为每个通道设计了新的通道子滤波器和对应的子滤波器状态检测函数,当通道存在故障时,能够及时检测出故障并对故障通道进行隔离;当通道恢复正常时,也能够及时检测到并充分利用恢复正常的通道卫星信号。仿真结果表明,在部分通道卫星信号被遮挡导致伪距异常的环境下,改进的矢量跟踪环路提高了矢量跟踪卫星惯性深组合的导航性能,有效遏制了故障通道对组合导航系统的影响。     

THEORY OF DIELECTRIC ELASTOMERS

In response to a stimulus, a soft material deforms, and the deformation provides a function. We call such a material a soft active material （SAM）. This review focuses on one class of soft active materials： dielectric elastomers. When a membrane of a dielectric elastomer is subject to a voltage through its thickness, the membrane reduces thickness and expands area, possibly straining over 100%. The dielectric elastomers are being developed as transducers for broad applications, including soft robots, adaptive optics, Braille displays, and electric generators. This paper reviews the theory of dielectric elastomers, developed within continuum mechanics and thermodynamics, and motivated by molecular pictures and empirical observations. The theory couples large deformation and electric potential, and describes nonlinear and nonequilibrium behavior, such as electromechanical instability and viscoelasticity. The theory enables the finite element method to simulate transducers of realistic configurations, predicts the efficiency of electromechanical energy conversion, and suggests alternative routes to achieve giant voltage-induced deformation. It is hoped that the theory will aid in the creation of materials and devices.     

英国研制手持式检测仪器识别假酒

英国技术人员正在研制一种手持式设备，从而可通过瓶子快速检测假冒威士忌和葡萄酒，此举旨在打击假冒威士忌和葡萄酒的行为。根据苏格兰威士忌协会的资料，在创纪录的2010年，备受欢迎的酒类销售为英国的出口增加了34．5亿英镑。威士忌在金砖四国的销量也显著增加。其中在中国增加了24％，达到5500万英镑。然而与此同时，假冒威士忌和葡萄酒的情况也屡屡发生。     

Energy dissipation of a ring-like metal rubber isolator

Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and deformation are studied and verified by experiments. The results show that the force and displacement hysteresis loop of the MR isolator is described by the force and deformation hysteresis loops of the MR elements. In addition, the relationship between the energy dissipation coefficient of the MR element and that of the MR isolator is derived. The energy dissipation coefficient is programmed and calculated by MATLAB using experimental data, and the results are compared with the theoretical value. It is the basis for the design and applied research of the MR isolator in a future study.