Ti扩散铌酸锂光波导特性的热固定技术

在Ti扩散铌酸锂光波导中,因光致折变效应而导致光波导特性漂移.在光波相干性的导波光学器件中,光致折变效应的影响尤为严重.本文报道了稳定光致折变效应的热固定技术实验结果;并提出在光波导特性的热固定过程中,不是H~+离子起主导作用这一看法.     

Remote Generation of Entanglement for Individual Atoms via Optical Fibres

The generation of atomic entanglement is discussed in a system that atoms are trapped in separate cavities which are connected via optical fibres. Two distant atoms can be projected to Bell-state by synchronized turning off of the local laser fields and then performing a single quantum measurement by a distant controller. The distinct advantage of this scheme is that it works in a regime where Δ≈κ〉〉g, which makes the scheme insensitive to cavity strong leakage. Moreover, the fidelity is not affected by atomic spontaneous emission.     

太赫兹波段折叠波导行波管的线性分析和计算

给出了太赫兹波段折叠波导行波管中考虑管壁欧姆损耗的带电子束扰动的色散方程。求解该方程可以得到器件中小信号增益的值。通过编制Matlab程序,分析计算了不同工作点、不同折叠波导结构参数和不同工作频段时小信号增益的变化特性。计算结果表明:适当选取工作点和结构参数,可以获得最佳增益值;考虑损耗后,除了前向增长的辐射场外,还会出现反向传输的静态波;随着工作频段向高频方向延伸,前向波的增益显著降低,而反向波强度则增大。因此,工作频率提高时,为了达到一定大小的增益,需要的折叠波导的周期数也相应增加。     

螺旋波导压缩频率调制脉冲的初步研究

利用螺旋波导对频率调制脉冲进行压缩可大幅度提高脉冲峰值功率。利用所编Matlab程序对螺旋波导的色散特性进行了计算和分析,获得了波纹幅度和纵向周期长度等结构参数对其色散特性的影响规律;给出了脉冲功率压缩比的计算公式,对不同脉宽和频带宽度、不同频率调制形式的微波脉冲通过螺旋波导后的功率压缩比进行了计算和分析。计算表明:脉冲的频率调制形式对功率压缩比影响较大;相同频率调制形式下,脉冲长度越长,工作频带越宽,功率压缩比越高。为了获得尽可能高的功率压缩比,需对脉冲的频率变化方式进行调节,使其与螺旋波导色散特性匹配。同时还需要在高的功率压缩比和高的压缩效率之间做出权衡。计算得到,当注入脉冲的脉宽为40ns、工作频带为8.8~9.5GHz、频率调制形式与螺旋波导色散特性匹配时,功率压缩比达到了15,压缩效率约为40%。     

激光显示跻身彩电行业未来三年市场趋势揭秘

正近日,中国电子视像行业协会发布一份名为《中国彩电新型显示技术发展白皮书》的报告,报告预测,未来三年4K超高清在新兴实用技术的助力下进一步成为中国彩电的主流甚至是标配,而一直被认为是"下世代显示技术"的OLED因为受制于一些关键技术、成本及良品率偏     

Highly sensitive digital optical sensor with large measurement range based on the dual-microring resonator with waveguide-coupled feedback

We propose a novel high-performance digital optical sensor based on the Mach-Zehnder interferential effect and the dual-microring resonators with the waveguide-coupled feedback. The simulation results show that the sensitivity of the sensor can be orders of magnitude higher than that of aconventional sensor, and high quality factor is not critical in it. Moreover, by optimizing the length of the feedback waveguide to be equal to the perimeter of the ring, the measurement range of the proposed sensor is twice as much as that of the conventional sensor in the weak coupling case.     

Controllable preparation of two-mode entangled coherent states in circuit QED

Although the multi-level structure of superconducting qubits may result in calculation errors, it can be rationally used to effectively improve the speed of gate operations. Utilizing a current-biased Josephson junction （A-type rf-SQUID） as a tunable coupler for superconducting transmission line resonators （TLRs）, under the large detuning condition, we demonstrate the controllable generation of entangled coherent states in circuit quantum electrodynamics （circuit QED）. The coupling between the TLRs and the qubit can be effectively regulated by an external bias current or coupling capacitor. Further investigations indicate that the maximum entangled state can be obtained through measuring the excited state of the superconducting qubits. Then, the influence of the TLR [tecay on the prepared entangled states is analyzed.     

Doubly Heavy Baryon Production in e＋e- Annihilation

Considering the inclusive process, we study the doubly heavy baryon ≡cc （≡bb） production through e＋e- anni- hilation. Both the diquark QQ in color sextet and triplet are discussed. The results show that the contributions from these two color states play equally important roles. At the Z^0 pole, a significant enhancement can be found in the doubly heavy baryon production.