Fabrication and Characterization of Ni Thin Films Using Direct-Current Magnetron Sputtering

Ni films are deposited by using ultra high vacuum dc magnetron sputtering onto silicon substrates at room temperature, and the high-quality and high-density films are prepared. The parameters, such as thickness, density and surface roughness, are obtained by using small-angle x-ray diffraction (XRD) analyses with the Marquardt gradient-expansion algorithm. The deposition rate is calculated and the Ni single layer can be fabricated precisely. Based on the fitting results, we can find that the surface roughness of the Ni films is about 0.7nm, the densities of Ni films are around 97% and the deposition rate is 0.26nm/s. The roughness of the surface is also characterized by using an atomic force microscope (AFM). The changing trend of the surface roughness in the simulation of XRD is in good agreement with the AFM measurement.     

平面上Volterra型随机微分方程解的轨道惟一性

In this paper we prove the pathwise uniqueness of a kind of two-parameter Volterra type stochastic differential equations under the coefficients satisfy the nonLipschitz conditions. We use a martingale formula in stead of Itǒ formula, which leads to simplicity the process of proof and extends the result to unbounded coefficients case.     

制备相干态腔场GHZ态

提出了一种利用简并Ⅴ型三能级原子与相干态光场(大失谐条件下)Raman相互作用实现类自旋的腔场Greenberger-Home-Zeilinger(即GHZ)态的新方案。     

开关型霍尔传感器的原理与工程实现

介绍了开关型霍尔传感器的工作原理，设计了适用于工程测量的具体线路，并分析了该线路的特点。     

Geodesic Acoustic Mode in Toroidally Axisymmetric Plasmas with Non-Circular Cross Sections

The geodesic acoustic mode （GAM）, first predicted by Winsor, Johnson and Dawson in an attempt to explain some experimentally observed low frequency oscillations in stellarators, is a special electrostatic fluid mode with low mode number and coupled with the so-called geodesic curvature of a toroidally confined plasma. The recent on this mode are due to the close relevance of the stabi- lization of drift turbulence by both the zonal flow and the GAM. Previously, the GAM was illustrated in very simple geometries,     

潜热型热功能流体强化换热分析

本文建立了分析带有相变微胶囊的潜热型热功能流体的流动和换热过程数理模型,应用有限差分法和移动热源法进行联合求解。计算结果表明,相变微胶囊的加入:较好地提高了流体的换热性能。获得了相变颗粒大小和体积分数对强化换热影响等结果。计算结果对该类流体的设计和应用提供了理论依据。     

轴线起爆式螺线管型爆磁压缩发生器理论模型

 对轴线起爆式螺线管型爆磁压缩发生器进行了理论模型研究，建立了爆炸管的一维爆轰驱动模型、螺线管内空间磁场强度分布模型、爆炸管外表面磁压力模型和发生器系统的等效电路模型等，对此类发生器的物理过程进行系统描述。在此基础上，编制了相应的零维数值模拟程序CEMG 1.0，利用该程序分别对四种不同模型参数的发生器进行了理论计算和参数优化，并对其中一模型发生器爆炸管外表面的磁压力及其引起的剩余电感进行了计算，给出了剩余电感与初始输入条件及负载电感的关系，从而得到该模型的输出性能极限。对理论模型的正确性进行了实例验算证明。     

Banach空间中拟-似变分包含解的存在与逼近问题

研究了Banach空间中拟-似变分包含解的存在与逼近问题.给出了一种寻求解的新的迭代算法,建立了具混合误差的Ishikawa型迭代序列强收敛到解的充要条件.所得结果推广了一些相关的结果.