Properties of Diamond-Like Carbon Films Synthesized by Dual-Target Unbalanced Magnetron Sputtering

Smooth, dense and uniform diamond-like carbon films (DLC films) for industrial applications have successfully been prepared by dual-target unbalanced magnetron sputtering and the DLC characteristics of the films are confirmed by Raman spectra. It is found that the sputtering current of target plays an important role in the DLC film deposition. Deposition rate of 3.5 μm/h is obtained by using the sputtering current of 30 A. The friction coefficient of the films is 0.2-0.225 measured by using a pin-on-disc microtribometer. The structure of the films tends to have a growth of sp^3 bonds content at high sputtering current. The compressive residual stress in the films increases with the increasing sputtering current of the target.     

Ar,N2气体中蒸发制备Fe—B超细微粒的研究

用气体蒸发法在１３３．３Ｐａ的Ａｒ、Ｎ２气体中制备了以Ｆｅ９０Ｂ１０为母材的超细微粒。在不同惰性气体中形成的Ｆｅ含量以及晶化程度显著不同。讨论了两种微粒性质差异的形成机制。     

An Electromagnetic Model for Jet Power from an Advection Dominated Accretion Flow around a Rotating Black Hole

We discuss jet production from an advection dominated accretion flow (ADAF) around a rotating black hole (BH) in an electromagnetic regime. An analytical expression for the jet power is derived by using an equivalent circuit in the BH magnetosphere. It turns out that a large fraction of jet powers is contributed from the inner region of the ADAF, and the jet power depends sensitively on the degree to which the flow is advection-dominated. In addition, we use our model to fit the strong jet powers of several BL Lac objects, which cannot be explained by virtue of the BZ process.     

Temperature Controlled Filamentation in Argon Gas

Temperature controlled filamentation is experimentally demonstrated in a temperature gradient gas-filled tube. The proper position of the tube is heated by a furnace and two ends of the tube are cooled by air. The experimental results show that multiple filaments are shrunken into a single filament or no filament only by increasing the temperature at the beginning of the filament. This technique offers another degree of freedom of controlling the filamentation and opens a new way for intense monocycle pulse generation through gradient temperature in a noble gas.     

显示用上转换绿色发光材料NaYF4∶Er,Yb及其特性

采用喷射微波燃烧合成法制备了上转换发光显示器中发绿光的上转换发光材料NaYF4∶Er,Yb.测试了该材料的XRD衍射图谱和发光效率.给出了该材料在1 064 nm三种激光功率激发下的发光光谱.分析了该材料的上转换发光机理,得到545 nm和662 nm峰值发光分别是Er3+的4S3/2→4I15/2和4F9/2→4I15/2跃迁产生的.NaYF4∶Er,Yb具有较强的上转换绿光,同时存在的较弱的红光易于用滤色膜滤除,满足显示对三基色中绿色的要求;并且喷射微波燃烧合成法制备的该材料达到了高分辨率显示应用超细粉体的要求.     

Ar(3P0,2)+NH3初生态产物NH2(2A1)的内态分布

首次报告了在分子束条件下,研究Ar(3P0,2)+NH3碰撞解离反应·利用单光子计数方法进行测量,获得了部分转动分辨的初生态产物NH2(2A1)→（2B1）发射谱,并详细地进行了标识·发现主要为（0,v 2',0)→（0,0,0）跃迁（v2'≤5,K'a≤6,J'≤10)。通过对部分分辨较好的光谱范围进行了模拟,得到反应生成的NH2(2A1,v2'=2,k'a =1)态绕b/c轴的转动温度为1050K,高于母体分子NH3的转动温度300K。由亚稳态碰撞传能电子交换机理认为这是由于碰撞对手Ar和母体NH3分离时反冲作用的结果。碰撞传能解离机理和光解过程不同,后者仅观察到轴的转动激发。     

Al-Li合金光谱标准样品制备和定值

本文叙述了Ａｌ－Ｌｉ合金光谱分析用标准样品的制备过程和定值结果。在制备过程中采用了先进的氩气保护、新型熔剂覆盖盖技术防止锂元素的烧损,首创作了“间歇式半连续铸造法 ”、“分步调整成分法”等先进的工艺,解决了Ａｌ－Ｌｉ标样铸锭不锡成形、成易偏析等技术难关;最后采用多家协作分析定值法和科学的数理统计方法对数据处理给出定值结果和不确定度。     

脲基氨基甲酸酯化合物的合成及应用研究

在轿车发动机的燃烧室中以及发动机进气系统的汽油喷嘴上,汽油往往因高温及废气的酸性物质作用而产生沉积物,尤其是在喷油嘴上会产生结焦,甚至堵塞喷油嘴,使汽车不能启动运行［'－'j．采用优化发动机设计的办法,对改善沉积物和结焦作用不大,而在汽油中加人汽油清净分散剂却能产生较好的效果．目前,美国加人清净分散剂的汽油已占90％,深入研究新型、高效的清净分散剂已成为研究的热点．按化学结构汽油清净分散剂大致分为两类"－'：（l）小分子胺类,如N一苯硬脂酷胺、单丁二醋亚胺、双丁二酚亚胺和1,3一三甲撑二胺类等;（2）低聚…     

用电磁打点计时器做模拟火箭运动实验

模拟火箭运动的简易实验装置用打点计时器进行数据采样, 获得了位移、速度和加速度随时间变化的关系曲线． 用最小二乘法进行了曲线拟合, 验证了理论公式的正确性, 并确定了喷射率ｋ 的值