锑掺杂氧化锡粉体的太赫兹透射特性

以SnCl45H2O和SbCl3为原料,采用液相化学共沉淀法制备锑掺杂氧化锡（ATO）粉体。分析了不同Sb掺杂质量分数条件下,ATO粉体的禁带宽度变化,并对材料在0.2~1.6 THz波段的透射时域和频域谱,以及吸收和屏蔽参数进行了对比分析。结果表明,ATO粉体的禁带宽度随着Sb掺杂量的增加先减小后增大;同时,ATO粉体对THz波的吸收系数随着Sb掺杂量的增加先增大后减小,当Sb掺杂质量分数为9%时,ATO的吸收系数在1.25 THz处达到最大值156.5 cm-1,屏蔽效能在1.24~1.60 THz范围内最高达到45.0 dB。     

Role of chelating agent in chemical and fluorescent properties of SnO2 nanoparticles

A modified polyacrylamide gel route is applied to synthesize SnO2 nanoparticles. High-quality SnO2 nanoparticles with a uniform size are prepared using different chelating agents. The average particle size of the samples is found to depend on the choice of the chelating agent. The photoluminescence spectrum detected at λex = 230 nm shows a new peak located at 740 nm due to the surface defect level distributed at the nanoparticle boundaries.     

Range Distribution Parameters and Electronic Stopping Power for ^19F^＋ Ions in SnO2, Indium-Tin Oxide, AgGaSe2 and AgGaS2： Comparison Between Theory and Experiment

Range distributions of fluorine for ^19F^ implantation into SnO2, indium-tin oxide, AgGaS2 and AgGaSe2 aremeasured by using the ^19F(p, αγ)^16O resonant nuclear reactions. The electronic stopping cross sections for ^19F ions in these materials are derived from the measured range distributions. These experimental results are compared with those obtained from the newest version of stopping and range computer code, SRIM2003. Thevalues of projected range predicted by the SRIM2003 agree well with the measured values for AgGaS2 andAgGaSe2 substrates. However, the values given by the SRIM2003 substantially deviate from the experimentalvalues for the oxide materials SnO2 and ITO.     

SnO2—Al2O3复合氧化物催化剂的一氧化氮选择催化还原性能

采用双股并流共沉淀方法制备的锡铝复合氧化物,对有氧条件C3H6选择还原NO反应有较高的催化活性和较宽的反应温度区间。具有最佳配比（Sn:Al(摩尔比）＝1：1.94）的锡铝复合氧化物样品,在反应温度350℃时可使NO转化率达71％,XRD、H2－TPR及NH3－TPD的研究结果表明,锡与铝难以形成氧化物固溶体, 而SnO2是以微晶形态分散于无定形的Al2O3上,Al2O3的中等强度酸性与SnO2微晶适度的氧化还原性能相结合,使锡铝复合氧化物具有较高的催化活性。     

Distereoselective one-pot synthesis of pyrimidopyrimidines using sulfated tin oxide as a reusable catalyst： An extension of Biginelli-type reaction

The Biginelli-type compounds 4,5,8a-triarylhexahydropyrimido[4,5-d]pyrimidine-2,7（1H,3H）-diones were synthesized by a one-pot three-component reaction using sulfated tin oxide as a reusable catalyst. This method has the advantages of high yields, short reaction time, simple starting materials and reusability of catalyst for several times.     

SnO2-Nb2O5/MgAl2O4/α-Al2O3催化环氧乙烷水合制乙二醇

采用水热稳定的MgAl2O4尖晶石对-αAl2O3载体表面进行修饰,采用具有较强亲水性能的SnO2对活性组分Nb2O5进行修饰,制备了SnO2-Nb2O5/MgAl2O4/-αAl2O3催化剂,并用于环氧乙烷水合制乙二醇反应.采用X射线衍射、红外光谱和程序升温脱附研究了Sn/Nb摩尔比对催化剂酸性、环氧乙烷在催化剂表面的吸附状态和吸附强度以及催化剂性能的影响.结果表明,Sn/Nb摩尔比明显影响催化剂的组成和结构;催化剂的结构不同,环氧乙烷在催化剂表面的吸附强度存在明显差别,催化剂的催化性能明显不同.     

Al2O3/SnO2 Co-Nanoparticle Modified Grafted Collagen for Improving Thermal Stability and Infrared Emissivity

Al2O3/SnO2 co-nanoparticles were prepared with a modified sol-gel technique followed by a thermal treatment process. With these co-nanoparticles the grafted collagen-Al2O3/SnO2 nanocomposites were obtained using a supersonic dispersion method. X-ray diffraction, FT-IR analysis, transmission electron microscopy, TGA/DTA and infrared emissivity test were performed to characterize the resulting nanoparticles and nanocomposites, respectively. The Al2O3/SnO2 co-nanoparticles showed a narrow distribution of size between 20-40 nm and could be uniformly absorbed on the tri-helix scaffolds of the grafted collagen without any aggregation. The nanocomposites possessed better thermal stability and substantially lower infrared emissivity than the grafted collagen and Al2O3/SnO2 co-nanoparticles with an increase of degradation temperature from 39 to 210 ℃ and a decrease of infrared emissivity from 0.850 of the grafted collagen and 0.708 of the Al2O3/SnO2 co-nanoparticles to 0.424, which provided a potential application of the nanocomposites to areas such as photoelectronics.     

新型无机太阳能电池

UC Berkeley化学教授A.Paul Alivisato的小组使得一度仅局限于理论范畴的一种完全由无机纳晶组成的新型太阳能电池成为现实。虽然这种无机电池目前的效率只有2.9%,而市售太阳能电池的效率已达到15%左右,但是这一进展可能致使一类较传统硅基太阳能电池价廉而且稳定的能量转化器件的问世。Alivisato等的做法是将两层柱状无机纳晶分别旋涂在覆有铝的氧化锡铟玻璃上,第一层为CeTe,第二层为CdSe。当这种电池放置在日光下时,CeTe和CdSe层间将发生电荷转移。这种无机器件还有超越由有机材料制成的太阳能电池之处,即吸收光的频区较宽。(Scien…     

电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

Fabrication of large-scale ripples on fluorine-doped tin oxide films by femtosecond laser irradiation

The large-scale uniform self-organized ripples are fabricated on fluorine-doped tin oxide （FTO） coated glass by femtosecond laser. They can be smoothly linked in a horizontal line with the moving of XYZ stage by setting its velocity and the repetition rate of the laser. The ripple-to-ripple linking can also be realized through line-by-line scanning on a vertical level. The mechanism analysis shows that the seeding effect plays a key role in the linking of ripples.