微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

主链含硅聚芳酯的合成及气体透过性能的研究

以双［对－酰氯苯基］二甲基硅烷和酚酞、四溴酚酞以及双酚Ａ为原料，合成了三种主链含硅聚芳酯，并对聚合物相关的物理性质进行了表征，制成了均质透明的薄膜．采用低真空法测定这些聚合物对Ｈ２、Ｏ２、Ｎ２、ＣＯ２、ＣＨ４的气体透过速率，并计算出气体透过系数、扩散系数、溶解系数、分离系数．从气体透过性能与聚合物分子结构关系的角度，按照气体透过的溶解－扩散机制，对聚合物的气体透过性能进行了研究，而且着重讨论了聚合物的堆积密度对气体扩散系数的影响，以及聚合物主链中极性链段的百分含量对气体溶解系数和溶解选择性的影响。     

表面活性剂的基体辅助激光解吸电离/质谱分析表征

利用基体辅助激光解吸电离／质谱（MALDI－MS）技术对表面活性剂的分析表征进行了详细研究。以2，5－二羟基苯甲酸作为基体，考察MALDI样品制备方法如液滴干燥法、快速干燥法及三明治法对测定结果的影响，发现三明治方法更适合表面活性剂的分析。MALDI可以准确测定离子型表面活性剂的分子量，同时对于非离子型表面活性剂，还可以测定其平均聚合度和分子量的分布。     

便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。     

功能液晶膜的新进展

论述了功能液晶膜的新近研究结果和发展动向,指出功能液晶膜具有优异的气体分离、液体分离和电光性能,可望作为高效气体分离膜、高效液体分离膜和大面积光控膜,具有较重大的理论与实际意义。     

微波辅助萃取/气相-质谱联用分析蔬菜中的有机磷农药

 建立了微波辅助萃取 (MAE) /气相 质谱联用法 (GC MS)测定蔬菜样品中二嗪磷、对硫磷、水胺硫磷的分析方法 ,研究了不同溶剂的萃取效率。选择二氯甲烷为萃取溶剂 ,采用二因素三水平的正交设计实验优化了萃取溶剂体积和萃取时间。方法的线性范围分别为二嗪磷和对硫磷 4ng/ g～ 40 0ng/ g、水胺硫磷 2 0ng/ g～ 40 0ng/ g,检出限分别为二嗪磷 0 2 9ng/g、对硫磷 1 70ng/g、水胺硫磷 2 30ng/g。测定 2 0 0 0ng/g和 50 0ng/g加标蔬菜样品 ,回收率为 72 2 %～ 1 0 2 0 % ,RSD为 1 5 %～ 1 1 0 %。。     

温度和压力对六氟二酐型聚酰亚胺的透气性能的影响

本文研究了温度和压力对五种六氟二酐（６ＦＤＡ）型聚酰亚胺膜对Ｈ_２、ＣＯ_２、Ｏ_２、Ｎ_２和ＣＨ_４五种气体透过性能的影响．在３０－１００℃区间，五种聚酰亚胺的透气系数与温度的关系均符合Ａｒｒｈｅｎｉｕｓ关系式；在０．３－１．２ＭＰａ区间，压力对透气系数的影响很小．６ＦＤＡ－４，４＇－二氨基二苯酮（ＤＡＢＰ）和６ＦＤＡ－３，３＇－二甲基二苯甲烷二胺（ＤＭＭＤＡ）在１００℃仍然具有较大的透气选择系数，是比较好的气体分离膜材料．     

方正奥思在有机化学课件中的应用

计算机模拟教学在近几年已经愈来愈普遍 ,虽然计算机模拟过程并不能完全代替实验 ,也不能取代实验动手能力的训练 ,但计算机模拟有助于对基本概念的深入思考 ,对掌握基本概念和预计实验结果都有很大帮助。我们在研制有机化学和有机化学实验的课件过程中 ,对教学中的重点、难点进行了分析 ,针对理论教学中的反应历程和实验教学中的预习等难点问题采取了动画组来表达 ,取得了很好的效果。　　我们自 1 999年 5月起开始制作有机化学及实验ＣＡＩ课件 ,先后采用过Ａｕｔｈｏｒｗａｒｅ、ＶＢ、方正奥思并结合Ｃｈｅｍｏｆｆｉｃｅ、Ｃｏｏｌ3Ｄ…