Output Intensity Variations of the Laser Used in a Prism Coupling System and Its Application

The output intensity variations of the laser used in a prism coupling system are observed and found to be induced by the external optical feedback, which comes from the reflection on the prism. The intensity variations are explained with laser theory. The trough in the intensity variation corresponds to the position of the prism when the output light beam propagates perpendicularly to the prism. Based on the trough a new method for rotating the prism and reading out the step numbers is proposed, by which the angle 0° in the system need not to be calibrated. It is proven by experiment that the new method would improve the accuracy of the refractive index up to ±0.00001 and thickness to ±1 nm.     

Sixth harmonic generation of 1064-nm laser in KBBF prism coupling devices under two kinds of gas conditions

The conversion efficiency on the sixth harmonic of 1064 nm in KBe2BO3F2 （KBBF） at different gas pressures in two kinds of gases, helium and nitrogen, is measured and compared. In the both gases, maximum conversion efficiency on the sixth harmonic of 1064 nm in high vacuum is nearly 10% of 355 nm, which is almost four times higher than that in low vacuum. The maximum average output power at 177.3 nm is 670 ttW with the repetition rate of 10 Hz and the duration of 20 ps in high vacuum. It indicates that the sixth harmonic generation in high vacuum is more preferable than that in low vacuum.     

棱镜-光栅-棱镜分光模块整体化设计及衍射特性分析

PGP模块是超光谱成像仪中重要分光器件。为了能够在制作前有效预测PGP整个系统的衍射效率分布及其衍射特性,提出了PGP整体化设计方法。从体位相全息光栅设计角度出发,结合棱镜与光栅各项参数的制约关系,编制了计算PGP整体衍射效率的分析软件,综合考察了棱镜与光栅各项参数对PGP模块衍射特性的影响,讨论了光栅布拉格波长的漂移特性,据此设计了一种用于成像光谱仪的宽波段高衍射效率PGP分光模块。模拟结果表明：棱镜1材料的色散系数越小,PGP的光谱带宽越窄;光栅布拉格波长的漂移增大了PGP模块和光栅的光谱带宽,带宽增大使光栅的角度选择性随之增大,拓宽了棱镜1材料的选择要求;棱镜1顶角、光栅的胶层厚度和相对介电常数调制度等参数是影响PGP衍射效率分布的重要因素,制作时需要精确控制。利用此方法设计的PGP分光模块在400～1 000 nm波段范围内衍射效率不低于50%,并给出具体设计参数,这对PGP制作具有一定的参考价值。     

双棱镜干涉实验难点解析

总结了双棱镜干涉实验的调整难点及原因。提出解决的措施并对要点进行研究分析,收到良好效果。提出评价学生调整光路质量的方法。     

基于组合Wollaston棱镜成像光谱仪的视场扩大原理分析

论述了视场扩大型成像光谱仪的核心部件——组合Wollaston棱镜的结构和分光机理;应用波法线追迹法分析了光在任意方位入射面内,以任意角入射时组合Wollaston棱镜中的波矢传播规律;推导出了光在棱镜中的传播方向及出射点坐标;给出了传播过程中e光和o光之间光程差的理论表达式;采用计算机模拟,给出了光程差随入射角和入射面方位角的变化曲线;在此基础上对组合Wollaston棱镜扩大光谱仪视场的原理进行了深入分析和讨论.上述研究对偏振干涉成像光谱技术的理论研究与技术创新,对自行设计的稳态大视场偏振干涉成像光谱 关键词： Wollaston棱镜 偏振干涉成像光谱仪 波法线追迹法 视场扩大原理     

基于棱镜气室的光纤甲烷传感系统的研究

综合运用棱镜气室与谐波检测技术,构建了适用于宽广浓度范围内的光纤甲烷检测系统。以大气环境为背景,基于比尔-朗伯(Beer-Lambert)定律在气体弱吸收时的近似表述,利用背景扣除和比值处理技术,实现了常压下甲烷不同浓度水平(0～20%)的检测。利用渐变折射率透镜(GRIN)气室测量了甲烷在不同浓度时的直接吸收谱,结合现有DFB-LD光源选择甲烷2ν₃带的R5支(1 648.212 nm)作为被测吸收峰。在不同浓度气体配置过程中,进行了系统的在线实验,结果表明系统示值与浓度变化间线性良好,而且系统的稳定性和动态响应特性比较理想。该系统可根据不同现场环境的甲烷浓度水平,选择适当强度的吸收线,通过步进电机调节棱镜中线间的距离,进而改变气室内有效吸收光程,拓展了仪器的应用领域,可作为煤矿巷道或天然气管道沿线的瓦斯监测仪器。     

双重网络嵌入对公司IPO后市场表现的影响研究

将社会网络嵌入理论从单一网络拓展至双重网络,分析上市公司同时嵌入风险投资网络和承销商网络对公司IPO上市后市场表现的影响。利用2004～2017年有风险投资支持的IPO公司数据,实证检验结果表明：(1)单独嵌入风险投资网络中心位置、单独嵌入承销商网络中心位置,均会提高公司IPO后市场表现;(2)同时嵌入风险投资网络中心位置和承销商网络中心位置,对公司IPO后短期市场表现的正向影响会相互替代;(3)同时嵌入风险投资网络中心位置和承销商网络中心位置,对公司IPO后长期市场表现的正向影响会互相补充。     

Risley棱镜在光学侦察中的应用

近年来Risley棱镜在军事侦察领域得到越来越多的应用。介绍Risley棱镜的基本组成,从数学模型上论证了Risley棱镜两种工作原理及其应用技术,分析了工程实现的难点,描述了国内外的工程应用情况,国防科技大学研制的物理样机可实现10光束偏转,实验结果表明已初步实现了扫描成像和光束扫描功能。     

Experiments and analyses of a new type optical system for computed radiography

A new high-performance laser scanning system is designed. In this system, a scanning arm consisting of a pentagonal prism and a scanning object lens is used to replace the traditional Fθ lens, and a circular imaging plate transmission mechanism is specially designed in order to meet the requirement of the scanning arm. At the same time, the stimulation fluorescence can be obtained by the scanning arm. Some main factors that influence the spatial resolution and the performance of the laser scanner system are analyzed, and the analysis results are presented, which is helpful for further optimization design of the system. Experimental results indicate that the images obtained by the system have good visual effects and can meet the requirements of industrial inspection.