Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

压电陶瓷压电特性的激光调制法测量研究

介绍可测量压电陶瓷压电特性的激光干涉调制测量方法.采用相干检测原理对信号进行提取,不仅可以抑制噪声对干涉信号的影响,而且还可以大大降低光电探测器和电路的1/f噪声.与通常干涉仪测量方法相比,这种方法具有测量灵敏度高等优点.利用该方法对压电陶瓷压电特性进行了测量,讨论了激励电压信号的频率、幅度对压电陶瓷压电常数d₃₁的影响,并对其压电迟滞曲线进行了测量.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

Hα Emission Imaging during Supersonic Molecular Beam Injection by CCD Photograph

There are several fuelling methods for tokamak plasma： pellet injection （PI）, gas puffing （GP）, neutral beam injection （NBI） and supersonic molecular beam injection （SMBI） .SMBI has been created in the Southwestern Institute of Physics, China.     

用超声化学法制备有机包覆纳米银

纳米级银粉，以其纳米尺寸所赋予的独特性能，可广泛应用于催化剂材料、电池电极材料、低温材料和导电浆料，探索纳米银粉的制备方法具有重要的意义。2004年，通过超声化学法，在乙二醇介质中、以硝酸银为原料制备出了有机包覆的纳米银。产物用X射线光电子能谱仪（XPS）、透射电子显微镜（TEM）和红外光谱等进行了检测。     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.     

高灵敏度X光探测系统

对高灵敏度X光探测系统结构和灵敏度进行了阐述，给出了厚度差为0．1mm的铜台阶在低照射量下的透视图像及处理结果，证明了系统具有高的灵敏度。     

强光光学元件波前检测算法

针对强光光学元件高精度检测中使用的两个新参数一——波前位相梯度和功率谱密度的数值计算方法进行了研究，并对目前使用的大口径干涉仪传递函数进行了实验标定。     

SJTU-1型新型医用超声设备声输出测量系统通过鉴定

2003年2月27日由国家药品监督管理局医疗器械司委托全国医用电器标准化技术委员会组织,在上海市举行了SJTU-1型医用超声设备声输出测量系统的技术成果鉴定会。由王威琪院士、冯若教授、张德俊教授为主任委员的鉴定委员会,对此项成果进行了测试和技术鉴定,认为SJTU-1型医用超声设备声输出测量系统的技术指标达到了同类系统的国际先进水平,某些功能优于国外同类系统。