光功能纳米陶瓷材料研究取得重要成果

~~光功能纳米陶瓷材料研究取得重要成果@汪道友~~     

激光致晶态Ag11In12Te26Sb51相变介质光学常量的研究

研究了结晶度对Ag11In12Te26Sb51相变薄膜光学常数的影响。用初始化仪使相变薄膜晶化，改变晶化参量得到不同的结晶度，当转速固定时，随激光功率的增加，折射率基本随之减小，消光系数先是增大，而后减小；当激光功率固定时，随转速的增大，折射率也随之增大，消光系数也是先增大后减小。非晶态与晶态间的变换、薄膜微结构的变化（包括晶型的转变和原子间键合状态的变化）以及薄膜内残余应力的影响Ag11In12Te26Sb51相变薄膜复数折射率的主要原因。测量了单层膜的透过率和CD－RW相变光盘中Ag11In12Te26Sb51薄膜非晶态和晶态的反射率。     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.     

Solutions for a Mode Ⅲ Growing Crack in a Piezoelectric Plane Under Two Kinds of Electric Boundary Conditions ＊

The solutions for a mode Ⅲ crack growing along an arbitrary propagation path in a piezoelectric plane are studied under the impermeable surface condition and the electrical contact surface condition respectively. According to the two kinds of electric boundary conditions, the Hilbert and Riemann boundary value problems in a half-plane including opening smooth arc are obtained from the theoretical analysis. Moreover, the equipollence of the solution formed under these two electric boundaries is proved, and unified solutions for the stress and electric displacement distribution in the crack-tipfield of the piezoelectric plane are achieved.     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.     

Stopband Phenomena in the Passband of Left-Handed Metamaterials

Stopband phenomena are reported in the passband of left-handed metamaterials. The samples with linear defect are designed by removing one layer of split ring resonators （SRRs）. It is shown that the left-handed transmission peaks have a distinct transform with the relative deviation of the SRRs centre from the wire centre 8, from a single left-handed peak, double left-handed peaks with different magnitude to no transmission peak, i.e. left-handed properties of metamaterials disappear. Numerical simulation shows that the change of 8 makes the effective permeability shift at a frequency range, where stopband occurs. It is thought that the stopband in left-handed passband is due to the symmetry breaking between SRRs and wires in the metamaterials.     

各向异性接合材料界面端部场数值分析

为了求解各向异性接合材料界面端部奇异性应力场,建立了一种新型杂交元模型.该模型的独特之处在于:基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元.通过算例证明,新型杂交元模型能够利用较少的单元数获得较为精确的数值结果.当前模型应用范围广泛,能够用于复杂结构的界面端部场求解.     

喷雾干燥-高温固相法制备纳米LiFePO4与LiFePO4/C材料及性能研究

采用喷雾干燥-高温固相法制备纳米LiFePO₄与LiFePO₄/C正极材料，用X-射线衍射，扫描电镜等对合成材料进行了表征，并对以LiFePO₄为正极的电池进行了电化学性能测试。结果表明:材料合成最佳煅烧温度为600 ℃;合成过程中由于碳对LiFePO₄晶型的生长有一定的抑制作用，相对于纯LiFePO₄材料，LiFePO₄/C材料粒径更小;并且，在此最佳合成温度下合成的LiF     

纳秒激光闪光光解装置功能扩展──有机非线性材料二阶非线性系数测定

纳秒级激光闪光光解装置可用于有机光化学、光物理过程，瞬态发光和吸收的动力学过程的研究，在不改变原装置整体布局和结构的基础上，建立了有机非线性光学材料的二阶非线性系数测定方法，并为国家８６３专家委员会承担过仲裁测定。     

退火温度对钙钛矿型氧化物La0.68Pb0.32FeO3的结构及其乙醇气敏性能的影响

采用sol—gel法，分别在不同温度下退火2h，制得一系列纳米氧化物La0.68Pb0．32FeO3粉体，并测定了该材料对乙醇的气敏性能。随退火温度的升高，所得样品逐渐向单一钙钛矿结构转化。应用Scherrer公式对退火温度分别为200，400，600，800，1000℃的样品粒径进行了计算，样品粒径依次为11．5，13．6，16．4，20．0，25．3nm。这说明，随着退火温度的升高，样品粒径逐渐增大。对乙醇气敏性能的测定结果表明，随退火温度的升高，材料对乙醇的最佳灵敏度先升高、又降低，退火温度为800℃的样品最佳灵敏度达到51．7。