微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

TEXTURE AND CRYSTALLINITY EVOLUTION IN ISOTACTIC POLYPROPYLENE INDUCED BY ROLLING AND THEIR INFLUENCE ON MECHANICAL PROPERTIES

The orientation and crystallinity evolution of isotactic polypropylene （iPP） induced by rolling were studied using wide angle X-ray scattering with an area detector. The tensile mechanical properties of rolled isotactic polypropylene sheets were also measured in this work. The texture component method was used to analyze the rolling texture. The rolling texture consists mainly of （010）[001], （130）[001] and [001]//RD fiber components in the sample with a rolling true strain of 1.5. The results reveal that crystallinity drastically decreases during rolling. It is suggested that amorphization is a deformation mechanism which takes place as an alternative to crystallographic intralamellar slip depending on the orientation of the lamellae. Both the orientation and crystallinity affect the tensile mechanical properties of rolled polypropylene. Crystallinity influences the elastic modulus on both directions and yield strength on transverse direction at the first stage of deformation. Orientation is the main reason for the changes of mechanical properties, especially at the latter part of deformation. The changes of both tensile strength and elongation percentage on rolling direction are larger than those on transverse direction, which results from the orientation. At last, the anisotropic mechanical properties occur on the rolling and transverse direction： high tensile strength with low elongation percentage on rolling direction and low tensile strength with high elongation percentage on transverse direction.     

双－（3－烷基／芳基）－7H－1，2，4－三唑并[3,4-b]-1,3,4-噻二嗪类化合物的合成及波谱性质

利用1，4－二溴丁二酮（1）分别与3－烷基／芳基－4－氨基－5－巯基－1， 2，4－三唑（2a-2n）反应，合成了14种新的双－（3－烷基／芳基）－7H－1，2， 4－三唑并[3,4-b]－1，3，3-噻二嗪类化合物（3a-3n），并利用EA、IR，~1H NMR和MS确定了其结构。     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

CH2XH→CH3X (X＝O, S, Se)异构化的量子拓扑研究

利用从头算和量子拓扑方法讨论了CH₂XH→CH₃X (X＝O, S, Se)异构化过程的反应机理. 着重从电子密度拓扑分析计算了反应进程中的各点, 讨论了反应进程中键的断裂和生成, 上述反应都经历了三元环过渡结构, 找到了这类反应的"能量过渡态"和"结构过渡态", 且结构过渡态均在能量过渡态之后出现. 三元结构过渡态结构出现的范围与反应热成正比.     

碳碳相关谱测定泽泻萜醇F的结构

从泽泻中分离出新化合物泽泻萜醇F，采用二维核磁共振碳相关技术研究了该化合物的骨架结构。结合碳碳相关谱及远程碳氢相关谱等其它二维核磁共振技术，分析了该化合物的常规氢谱和碳谱，并准确归属了质子和碳核的化学位移。     

不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究

用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0～ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强     

β型聚丙烯注塑件的分层结构与力学性能

用X-射线衍射仪研究了不加和加成核剂形成不同晶型的三种聚丙烯注塑件的分层结晶结构,获得各层结晶度和β晶型含量(k_β)随皮芯距离的分布规律,测定了试件弯曲、拉伸和冲击性能。发现,纯等规聚丙烯试件主要含α晶型,皮层的结晶度和k_β低于芯层。加有α成核剂的试件仅含有α晶型,皮层的结晶度也低于芯层。加有β成核剂的试件主要含β晶型,皮层的结晶度和k_β值高于芯层。纯聚丙烯试件和β型为主的试件的分层结构中存在α晶和β晶间的转变。与α型聚丙烯相比,β型聚丙烯有较低的屈服强度,却有较高的抗张强度,显示很高的拉伸韧性和延展性,可明显提高室温以及玻璃化温度以下的低温抗冲击性能。     

以对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯为单体的液晶聚硅氧烷的合成与表征

侧链型液晶聚合物是目前很有兴趣的研究课题之一。在国内,有关的研究报道也逐渐增多,本工作设计并合成了对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯单体,其结构式为: