四种无机纳米颗粒对塑料抗紫外性能的研究进展

无机纳米颗粒在塑料抗紫外的研究中一直备受关注,主要介绍了四种(TiO₂、ZnO、SiO₂、CeO₂)典型的无机纳米颗粒在该领域的应用。首先归纳了其既能吸收又能反射或散射紫外线的抗紫外机理;其次,分别论述了不同无机纳米颗粒适用的紫外光波长范围,以在塑料中的添加方法和应用特点为主线,重点介绍了国内外四种无机纳米颗粒在塑料抗紫外性能中的研究现状和进展;最后,将四种无机纳米颗粒在塑料抗紫外性能中的应用特点进行了对比,提出了应用过程中存在的分散和相容性差等问题,以期为无机纳米颗粒的深入应用和发展提供一定的参考。     

一种基于目标梯度特征和轨迹预测的复杂云背景目标检测算法

对于复杂云层背景下的红外弱小目标检测跟踪一直是图像处理的研究热点。受复杂云层和强光等因素的干扰,目标很容易淹没在背景中。针对传统方法无法兼顾较高的目标检测概率和较低的目标检测虚警率的问题,提出了一种目标检测跟踪方法。通过梯度预滤波的方法获取初始目标,二次比对的方法获取真实目标;通过目标航迹建立与删除的方法降低虚警率;通过抗云层遮挡卡尔曼滤波跟踪的方法提升目标检测能力。实验结果表明,该技术不仅很好地抑制了复杂云层背景和强光干扰背景,而且通过目标建航和抗遮挡跟踪等方法极大提升了目标检测概率,降低了虚警率。     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

哌啶并[2,3-b]哌嗪类衍生物的设计、合成及其抗血小板聚集活性研究

以2,3-二氨基吡啶和2,3-丁二酮为起始原料,经环化、催化氢化和亲核取代反应合成了10个新型哌啶并[2,3-b]哌嗪类衍生物(3a~3j),其结构经¹H NMR、¹³C NMR和HR-MS确证。体外抗血小板聚集活性研究表明,化合物3d、3e、3g、3h和3j具有一定的抗血小板聚集作用,其中化合物3h(IC₅₀=1.24mmol/L)的活性显著优于母体化合物川芎嗪(IC₅₀=3.96mmol/L)和阳性药物阿司匹林(IC₅₀=2.41mmol/L)。     

基于现场总线的高隔离度可调直流电源嵌入式控制器设计

模块级联是用于绝缘实验所需的高性能对称双极型矩形波脉冲电源的一种方法,为实现级联,需要有能够协调工作的高隔离度直流电源。设计出嵌入到各电源的板级嵌入式控制器BEC,使各BEC作为从节点利用RS485接口和ModBus协议与嵌入式主控制器EHC构成一个主从式现场总线网络,并在主节点EHC的控制下协调工作。利用BEC内的STM32F103C8处理器产生隔离DC-DC桥的互补PWM控制信号和高隔离输出电压,并进行电流和输出电压的隔离检测。由基于电流切换的变参数增量式数字PI算法来确定脉冲宽度值,产生Buck调压电路的闭环PWM控制信号,实现输出电压的调压和稳压控制。实验结果表明该嵌入式控制器能够满足级联式对称双极型矩形波脉冲电源对高隔离度可调直流电源的需要。     

山东鲁抗立科药业有限公司(原山东鲁抗医药股份有限公司树脂分厂)

正山东鲁抗立科药物化学有限公司是山东鲁抗医药股份有限公司与上海立科药物化学有限公司的合资公司,新公司继续持有"鲁抗树脂"的品牌并继续研发和生产药用功能树脂。按照国家食品药品监督管理局[2000]56号文件要求,我们就药用级树脂做了大量工作,就树脂的物理性参数、有机残留控制、动物毒性试验请权威部门做了公正的检测。同时,我公司经过GMP、ISO9001、ISO14001认证,具备生产药用树脂的能力。     

N-Fluorinated phenyl-N＇-pyrimidyl urea derivatives： Synthesis,biological evaluation and 3D-QSAR study

With the increase of herbicide-resistant weeds, novel, more selective and even more potent herbicides to control weeds are needed. In this paper, a series of N-fluorinated phenyl-N＇-pyrimidyl urea derivatives were synthesized and screened for their herbicidal activities against Amaranthus retroflexus （AR） and Setaria viridis （ SV）. Compound 2S （N-（3-trifluoromethylphenyl）-N＇-（2-amino-4-chloro-6-methylpyr- imidyl） urea） exhibited marked herbicidal activity against SV（IC50 =11.67 mg/L） and is more potent than bensulfuron （IC50= 27.45 mg/L）, a commercially available herbicide. A statistically significant CoMFA model with high prediction abilities （q2 = 0.869, r2 = 0.989） was obtained.     

科学家模仿天然珍珠质结构制造新型陶瓷材料

<正>《自然-材料学》报道一种制造简便、强度硬度高的陶瓷材料,这种陶瓷材料可模拟天然珍珠质(包在珍珠外层的一种坚硬物质)的实体结构。这种陶瓷材料在600℃高温时仍可保持其性质,可应用于能源相关和运输安全相关的结构材料。陶瓷属于易碎物质。为了增强韧性,可在其成分中添加变形后不会发生断裂的聚合物和金属。但     

Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

具有抗生物污染活性的分子筛膜用于高效油水分离

The development of the global economy has been accompanied by frequent oil spills caused by accidental leaks and industrial manufacturing, which have seriously threatened the aquatic environment and human health. Traditional methods for the treatment of oily wastewater include centrifugation, skimming, flotation, oil-absorbing technology, etc., which are limited by low separation efficiency as well as secondary pollution during the post-processing of oil absorption materials. Recently, separation technologies utilizing the special wettabilities of filtration membranes have been developed to enrich and recycle oils from wastewater. Among these, the fabrication of superhydrophilic/underwater superhydrophobic membranes have attracted intensive research interest, which can selectively allow the passage of water through the membrane while blocking the oils. However, microorganisms are more likely to breed on these hydrophilic surfaces, eventually leading to the blockage of the membranes. In this study, ZSM-5 zeolite crystals (MFI topological structure) were coated onto the stainless-steel meshes by means of seeding and secondary hydrothermal growth. Then, 70% of the total Na⁺ ions in the zeolite channels were substituted by Ag⁺ ions via an ion exchange process. The resultant membranes (Ag@ZCMFs) were superamphiphilic in air, with both water contact angle and oil contact angle of approximately 0°. However, they became superoleophobic when immersed in water, and the underwater oil contact angle reached 151.27° ± 4.34°. In terms of special wettability, Ag@ZCMF achieved efficient separation for various oil-water mixtures with separation efficiencies above 99%. The water flux and intrusion pressure of Ag@ZCMF depended on the diameter of pinholes in the membrane, which could be modulated by altering the time of secondary hydrothermal growth. For instance, the average diameter of pinholes in Ag@ZCMF with optimum secondary growth time of 14 h (Ag@ZCMF-14) reached approximately 21 μm, giving rise to the water flux and intrusion pressure of 54720 L·m^-2·h^-1 and 4357 Pa, respectively. The anti-corrosion test and rubbing test confirmed the high chemical and mechanical stability of Ag@ZCMF-14, respectively. The separation efficiency of Ag@ZCMF-14 remained stable during ten purification-regeneration cycles, and no obvious attenuation was observed, proving the high separation stability of Ag@ZCMF-14. Furthermore, the loaded Ag⁺ ions afforded the membrane excellent anti-biofouling activity, which could effectively inhibit the growth of both alga and bacteria in the operating environment, thus preventing membrane blockage during the oil-water separation process. In particular, the bacteriostatic rate of Ag@ZCMF-14 to Escherichia coli reached to 99.6%. These results demonstrate that Ag@ZCMFs with anti-biofouling activity has promising potential future applications in the removal of oil slicks from oily wastewater.