紫外成像器件光电阴极封接焊料熔层缺陷对气密性的影响

为解决紫外成像器件光电阴极与管体封接漏气问题,对管体InSn合金熔化过程中出现的质量问题进行了深入分析,找出焊料熔层缺陷主要来源于对焊料除气不彻底和基底表面氧化及设备油污染。通过优化工艺参数,改进工艺质量和把化铟设备管体搁置焊料熔化改为浇铸熔化,使管体焊料熔化合格率达到了100%,光电阴极与管体封接气密性成品率达到98%。     

三维相位展开算法在精密运动测试中的应用

三维相位展开算法将基于空间的相位展开算法拓展到时间轴上,包含了一维时间和二维空间信息,适合于运动测试。通过建立一维时间相位展开算法的数学模型,分析了该算法运动测试的基本原理,讨论了在精密测试中的使用方法和适用范围,并对微谐振器的微结构进行运动测试。实验表明,算法在相位展开中引入时间信息,不仅消除了形变测量中需选取静止点为相位参考点或参考平面的限制,还可以同时测量物体表面某点纳米级的离面运动曲线和表面形变。     

High-contrast imaging for weakly diffracting specimens in coherent diffraction imaging

Coherent diffraction imaging (CDI) and ptychography techniques bypass the difficulty of having high-quality optics in X-ray microscopy by using a numerical reconstruction of the image that is obtained by inverting the diffracted intensity recorded by a charge-coupled device array. However, the reconstruction of the image from the intensity data obtained from a weakly diffracting specimen is known to be difficult because of the obvious reduction in signal-to-noise ratio (SNR). In this case, the specimen only slightly modifies the probe diffraction pattern, resulting in difficulty in the identification of the detailed structure of the specimen from the reconstructed image because of the poor contrast and sharpness of the image. To address this situation, a modification in the image retrieval algorithms used in the iterative reconstruction of the image is suggested. This modification should double the presence of high spatial frequencies in the diffraction pattern to enhance the contrast and edge detection in existing imaging techniques.     

Real-time three-dimensional infrared imaging using fringe projection profilometry

Infrared thermography determines the surface temperature of an object or human body. It is a promising imaging technology for medical and biological observations due to its contactless and completely non- invasive properties. However, traditional two-dimensional （2D） infrared thermography cannot retain the spatial information, and thus provides only qualitative diagnosis information. A novel real-time three- dimensional （3D） infrared imaging system which takes full advantages of high-speed, high-quality, high- sensitivity, and low-cost in 3D thermograph is presented. We demonstrate the real-time 3D thermal imaging at the speed of 24 frmnes per second （fps）, with resolution of 640 ×480 points. Experimental results demonstrate quantitatively measurement of temperature distribution of 3D surfaces in real-time is realized with this system.     

Segmentation of synthetic aperture radar image using multiscale information measure-based spectral clustering

A multiscale information measure （MIM）, calculable from per-pixel wavelet coefficients, but relying on global statistics of synthetic aperture radar （SAR） image, is proposed. It fully exploits the variations in speckle pattern when the image resolution varies from course to fine, thus it can capture the intrinsic texture of the scene backscatter and the texture due to speckle simultaneously. Graph spectral segmen- tation methods based on MIM and the usual similarity measure are carried out on two real SAR images. Experimental results show that MIM can characterize texture information of SAR image more effectively than the commonly used similarity measure.     

中药黄柏主要活性成分的光谱成像检测技术

为了实现中药主要活性成分的在体检测,运用光谱成像技术检测中药活性成分.使用自行开发的液晶光谱成像装置对中药黄柏的主要活性成分盐酸小檗碱进行了在体检测,选取紫外光源波长254 nm,获取了检品480～700 nm之间的连续荧光光谱图像.在分析检品光谱剖面图的基础上,以中国药品生物制品检定所提供的盐酸小檗碱标准品的光谱剖面图为依据,设计了高通滤波器得到了检品的特征光谱数据.对八种不同来源的市售黄柏饮片特征光谱,以及黄柏与其同科植物黄皮特征光谱的比较显示,使用本方法对中药进行定性、定量的检测,样品无需特殊处理,可在原生态的情况下进行;检测过程无损、实时;检测结果指纹特征明显.     

人造复眼成像系统研究的新进展

人造复眼成像系统具有体积小、功耗低、视角范围广等优点，是一种应用前景非常广阔的光成像系统。综述了人造复眼成像系统的研究背景及最新的研究进展，其中包宿基于不同仿生设计理念的各种新型人造复眼结构以及能够实现诸如彩色成像、指纹识别、全视角成像等新功能的实验系统；展望了人造复眼成像系统今后的研究方向。     

磁共振成像谱仪梯度波形分析

梯度是磁共振成像（MRI）的关键环节.通过采集谱仪梯度波形信号并进行分析,提取出各通道波形的特征点,从而有助于快速准确地判断谱仪梯度硬件电路或脉冲序列编写是否存在问题.采用虚拟仪器LabVIEW软件控制高速采集卡DAQ-2005设计实现多路采集系统,对谱仪的梯度输出进行采集.通过对波形数据进行直方图统计、滤波、差分计算等分析,提取出波形的特征点,这些特征点包含时间与幅度信息.使用实验室自主研发的谱仪进行了多次实验,对该方法进行验证,证明了该方法的有效性,也为谱仪研制和脉冲序列开发提供了一种辅助测试方法.     

一种基于两块PEM调制器的光谱测量方法

弹光调制干涉信号范围为百赫兹到数十吉赫兹之间,而由于探测器阵列无法对该等级频率实现有效响应,因此,该情况使弹光调制器在光谱成像工作中受到限制。为了解决该问题,发展了一种使用两块具有相近谐振频率的PEM,并基于该频率差进行光信号调制的方法。该方法将两个弹光调制器分别工作在数值略有差异的频率f₁和f₂上,被测光通过双弹光调制器实现差频调制,因此干涉信号中产生载有被测光的低频调制分量,低频调制频率是以δ_i(σ,t)=δ_0i(σ)sin(ω_it)为基频的一系列倍频信号,该低频调制信号使用普通探测器即可实现探测,再将直流和高频信号滤波后,仅对调制信号后的低频成分进行对应的运算即可得到被测光谱。由于该频率差比所使用PEM的谐振频率低2至3个数量级,因此,该方法可使探测器获得更多的响应时间,而且由于该方法并不需要所使用的两块PEM具有严格一致的谐振频率和相同的光程差,降低了系统本身的设计难度。     

基于蛇形光路的PET探测器作用深度提取方法

为实现正电子发射断层成像(Positron Emission Tomography,PET)探测器的作用深度(Depth Of Interaction,DOI)信息获取,本文提出一种基于分光技术的探测器设计方案.探测器采用晶体单元与硅光电倍增管(Silicon Photomultiplier,SiPM)一对一耦合、蛇形光路的设计和单端Anger加权读出方法进行DOI解码.基于GATE软件进行蒙特卡罗模拟,建立8×1的LSO晶体阵列(单根晶体尺寸3.1×3.1×20mm3);模拟泛场照射获取位置查找表;并进行不同深度的模拟,获得各晶体在各深度的空间分辨率.结果显示所模拟的探测器模块DOI分辨率在1.0~6.7mm之间,平均值为3.2mm.本文提出的基于蛇形光路的PET探测器方案能在维持系统成本和复杂度的前提下实现DOI解码,提升PET系统的成像性能.