Graphene oxide assisted facile hydrothermal synthesis of LiMn0.6Fe0.4PO4 nanoparticles as cathode material for lithium ion battery

Assisted by graphene oxide（GO）,nano-sized LiMn0.6Fe0.4PO4 with excellent electrochemical performance was prepared by a facile hydrothermal method as cathode material for lithium ion battery.SEM and TEM images indicate that the particle size of LiMn0.6Fe0.4PO4（S2）was about 80 nm in diameter.The discharge capacity of LiMn0.6Fe0.4PO4 nanoparticles was 140.3 mAh-g^1 in the first cycle.It showed that graphene oxide was able to restrict the growth of LiMn0.6Fe0.4PO4 and it in situ reduction of GO could improve the electrical conductivity of LiMn0.6Fe0.4PO4 material.     

新型生物相容性大分子磁共振成像造影剂的性质研究

将天冬氨酸与亮氨酸反应,合成了天冬氨酸-亮氨酸共聚物(PL),通过乙二胺将钆-1,4,7,10-四氮杂环十二烷-1,4,7,10-四乙酸(Gd-DOTA)连接到PL上,制备了大分子磁共振成像造影剂PL-A2-DOTA-Gd,通过核磁碳谱、凝胶色谱等方法对其结构进行了表征,利用细胞毒性实验、溶血性实验、体外弛豫效率测定以及体内动物磁共振成像等方法对其性能进行了评估。研究表明,PL-A2-DOTA-Gd的细胞毒性远低于临床应用的造影剂Gd-DOTA,且其弛豫效率(15.3 L/(mmol·s))是Gd-DOTA(5.8 L/(mmol·s))的2.6倍。大分子磁共振成像造影剂PL-A2-DOTA-Gd具有良好的血液相容性,对昆明小鼠的肝脏信号的增强效果约为Gd-DOTA的3.1倍,且能在较长时间内保持良好稳定的增强效果。     

石墨烯负载的金属氧化物纳米颗粒的可控制备及催化性能

采用直接浸渍法、过氧化氢均相氧化沉积法和氨水催化水解法制备了石墨烯负载的铁、钴、镍金属氧化物纳米颗粒.研究了三种沉积方法对颗粒尺寸分布的影响;采用透射电子显微镜、傅里叶变换红外光谱、X射线衍射和X射线光电子能谱表征了催化剂的形貌与结构.用过氧化氢均相氧化沉淀法可制得粒径分布最均匀的纳米颗粒.过氧化氢的氧化作用可使石墨烯表面的氧化基团含量最大化,为纳米颗粒提供了足够的吸附与成核点.氨水加速了金属离子的水解与成核,导致纳米颗粒的粒径增大与不均.以苯甲醇氧化为探针反应考察了催化剂的性能.催化剂的活性按以下顺序逐渐下降:过氧化氢辅助沉积法>直接浸渍法>氨水催化水解法,与纳米颗粒尺寸增长趋势一致.纳米催化剂颗粒尺寸与其活性的良好关联性显示,发展石墨烯负载尺寸可控的纳米催化剂的方法具有重要意义.     

Investigation of Hydrolysis in Poly（ethylene terephthalate） by FTIR-ATR

The hydrothermal aging of poly(ethylene terephthalate)(PET) was investigated at 70 95 °C. A new method to investigate the hydrolysis degree of PET by Fourier transform infrared spectroscopy(FTIR) was proposed. The spectra during the hydrothermal aging were measured using attenuated total reflection accessory(ATR). Peak resolving of carbonyl regions was performed, and the ratio of two groups of bands representing carboxylic acids and esters respectively were calculated to show the hydrolysis degree of ester groups in PET. The acid/ester ratio shows exactly the same trend as the average chain scission number per unit mass at various temperatures and thus can be used as a parameter to characterize the hydrolysis and random chain scission of PET. This method related to the hydrolysis mechanism directly, is simple, fast and convenient compared to the traditional methods such as viscometry, end-group titration and size exclusion chromatography(SEC). It may also be useful in hydrolysis characterization of other polyesters.     

常见客体分子对笼型水合物晶格常数的影响

Natural gas hydrates are considered as ideal alternative energy resources for the future, and the relevant basic and applied research has become more attractive in recent years. The influence of guest molecules on the hydrate crystal lattice parameters is of great significances to the understanding of hydrate structural characteristics, hydrate formation/decomposition mechanisms, and phase stability behaviors. In this study, we test a series of artificial hydrate samples containing different guest molecules (e.g. methane, ethane, propane, iso-butane, carbon dioxide, tetrahydrofuran, methane + 2, 2-dimethylbutane, and methane + methyl cyclohexane) by a low-temperature powder X-ray diffraction (PXRD). Results show that PXRD effectively elucidates structural characteristics of the natural gas hydrate samples, including crystal lattice parameters and structure types. The relationships between guest molecule sizes and crystal lattice parameters reveal that different guest molecules have different controlling behaviors on the hydrate types and crystal lattice constants. First, a positive correlation between the lattice constants and the van der Waals diameters of homologous hydrocarbon gases was observed in the single-guest-component hydrates. Small hydrocarbon homologous gases, such as methane and ethane, tended to form sI hydrates, whereas relatively larger molecules, such as propane and iso-butane, generated sⅡ hydrates. The hydrate crystal lattice constants increased with increasing guest molecule size. The types of hydrates composed of oxygen-containing guest molecules (such as CO₂ and THF) were also controlled by the van der Waals diameters. However, no positive correlation between the lattice constants and the van der Waals diameters of guest molecules in hydrocarbon hydrates was observed for CO₂ hydrate and THF hydrate, probably due to the special interactions between the guest oxygen atoms and hydrate "cages". Furthermore, the influences of the macromolecules and auxiliary small molecules on the lengths of the different crystal axes of the sH hydrates showed inverse trends. Compared to the methane + 2, 2-dimethylbutane hydrate sample, the length of the a-axis direction of the methane + methyl cyclohexane hydrate sample was slightly smaller, whereas the length of the c-axis direction was slightly longer. The crystal a-axis length of the sH hydrate sample formed with nitrogen molecules was slightly longer, whereas the c-axis was shorter than that of the methane + 2, 2-dimethylbutane hydrate sample at the same temperature.     

CdTe/Mn3 O4/SiO2荧光/磁共振双模成像纳米球的制备与表征

成功地制备了CdTe/Mn_3O_4/SiO_2核壳结构的荧光/磁共振成像双功能纳米球,并用透射电镜(TEM)、能谱分析(EDXA)、磁共振成像(MRI)、红外、荧光光谱等对其结构、磁共振成像和发光性能进行了表征。TEM照片显示所合成的纳米球具有明显的球形核壳结构。EDXA分析显示所制备的CdTe/Mn_3O_4/SiO_2纳米球表面只检测到Si和O元素,证明CdTe量子点和Mn_3O_4纳米立方体被成功地包被于二氧化硅纳米球之内。荧光发射光谱显示相对于CdTe量子点,CdTe/Mn_3O_4/SiO_2纳米球荧光发射光谱虽然发生了一定的蓝移,但是仍具有良好的荧光性能。MRI分析可知CdTe/Mn_3O_4/SiO_2纳米球的弛豫参数(r_1)为3.88 s~(-1)(mg·L~(-1))~(-1),说明所合成的CdTe/Mn_3O_4/SiO_2纳米球可用于T_1-加权磁共振成像。细胞毒性实验表明,当CdTe/Mn_3O_4/SiO_2溶液浓度达到300μg·mL~(-1)时,细胞活力仍可达到90%以上,表明此浓度对细胞的毒性作用较弱。     

一种基于分子内质子转移发色团的硫化氢荧光探针的合成及其生物成像研究

硫化氢在许多生理过程中扮演十分重要的角色,因此检测和成像生物体内的硫化氢具有十分重要的意义。该研究成功制备了一种基于分子内质子转移发色团的硫化氢荧光探针(DHCD)。在PBS-DMSO(磷酸盐-二甲基亚砜,99∶1,体积比,pH 7.45)缓冲溶液中,DHCD的荧光强度与NaHS的浓度在0～10μmol/L范围内呈现良好的线性关系,检出限为0.84μmol/L。该探针对硫化氢的响应具有较大的Stokes位移(～165 nm)、高灵敏度和选择性。此外,合成的探针拥有良好的细胞渗透性和低的毒性,可用于HeLa细胞中硫化氢的荧光成像,在生物分析中具有潜在应用价值。     

准脆性材料抗压强度能量平衡尺寸效应模型

针对现有尺寸效应模型难以体现准脆性材料完整的抗压强度尺寸效应变化规律及其内在机理, 本文通过分析准脆性材料单轴压缩破坏过程中能量输入、储存、整体和局部能量耗散, 建立体现整体和局部损伤的力学模型及描述上述能量演化过程的双线性名义和真实应力应变曲线, 在此基础上确定了名义应力最大时输入能量、储存弹性能、整体和局部能量耗散的表达式, 最后基于能量平衡原理建立抗压强度尺寸效应模型. 抗压强度能量平衡尺寸效应模型能完整体现名义抗压强度尺寸效应, 即随试样尺寸增大, 名义抗压强度在试样尺寸小于等于局部损伤区尺寸时为真实强度, 然后逐渐减小, 最终当试样尺寸趋于无穷大时趋于弹性极限强度; 抗压强度能量平衡尺寸效应模型也能同时体现高径比和试样直径对名义强度的影响, 其包含的参数具有明确的物理意义, 可以反映真实强度、弹性极限强度、名义损伤模量非线性、局部损伤区大小和方向对准脆性材料名义抗压强度尺寸效应的影响; 通过把抗压强度能量平衡尺寸效应模型和现有尺寸效应模型应用于预测各种材料尺寸效应试验和数值模拟数据, 结果表明: 抗压强度能量平衡尺寸效应模型能很好描述试验和数值模拟尺寸效应的非线性变化规律及内在机理, 和现有尺寸效应模型相比, 其总体平均误差最小, 且小于5%.      

一种弹体入水冲击波阴影成像可视化系统及其试验研究

扩大成像视野对于开展充水容器中弹体入水冲击波传播及弥散方面的可视化研究具有重要的实际意义。阴影成像技术适用于大视野实验,且对流场冲击波和扰动的可视化研究具有简单性和通用性,其中直接阴影成像最为简单,但可靠点光源的缺乏是阻碍其发展应用的瓶颈。因此基于国产短弧氙灯管,自制了短弧氙灯点光源,根据阴影成像原理,设计出一种弹体入水冲击波阴影成像可视化系统,详细介绍了其组成和运行原理。利用该系统对高速弹体入水进行了试验研究,获得了弹体入水冲击波的阴影成像和冲击波信号的压力时程曲线,通过阴影成像和冲击波信号相结合分析了弹体入水冲击波的传播特性,并进行了理论验证。结果表明:该弹体入水冲击波阴影成像可视化系统具有可靠性和设计的合理性。弹体高速入水后,初始冲击波的强度最大,随着冲击波的传播,冲击波强度逐渐降低,水中冲击波的传播速度不断降低,球形冲击波的半径逐渐增大。     

具有聚集诱导发光性质的近红外荧光染料

聚集诱导发光(AIE)现象的发现为解决传统有机荧光分子在高浓度和聚集形态下存在的荧光猝灭问题提供了最佳方案,并实现了在光电器件、化学传感、生物成像和靶向治疗等众多领域的广泛应用.随着对AIE 发光机理研究的不断深入,AIE 分子体系得到了极大的扩展.其中,一类具有给体-受体结构的AIE分子能够显著降低分子能隙,使发光分...