衍射光学元件衍射效率影响混合光学系统性能的一种分析方法

本文从衍射光学元件的衍射效率入手,详细地分析了衍射光学元件衍射效率同混合光学系统光学传递函数的关系,并通过一个实际例子对所分析的结果进行了深入讨论.     

衍射光学元件的解析分析方法

从波动光学传播的菲涅尔衍射出发，探讨一次光学转换形成任意要求的图形的问题。导得两平行传播平面的函数关系，从而在确定像面分布的条件下可以逆求出原始面的振幅与倍相分布。文中给出了几个实例，充分表明这是有实用价值的一种衍射光学元件设计方法。     

对象散全息元件产生的正交象散特性的研究

本文从理论上分析了用全息方法制作具有象散特征的一种光学元件——象散全息元件——的可能性,并得到实验上的证明.对由象散全息元件在空间正交方向上产生的象散特性作了较为仔细的研究,给出了实验结果.若用此元件代替普通象散系统,将具有使用方便,经济等优点.     

Transverse Zeeman background correction method for air mercury measurement

By utilizing a natural mercury lamp, the transverse Zeeman background correction method, which is used for trace mercury measurement in air, is studied. In this paper, a natural mercury lamp is used as a light source, and is placed in a 1.78-T magnetic field. The lamp emits two linearly polarized light beams σ± and π of 253.65-nm resonance line, which are used as bias light and absorbing light, respectively. A polarization modulation system is used to allow σ± and π light beams to pass through alternately with a certain frequency. A multipath optical cell with 12-m optical path is used to increase optical distance. Based on the system described above, the influence caused by UV absorbing gases, such as NO2, SO2, acetone, benzene, and O3, is analyzed. The results show that it may reduce the detection limit when the concentrations of these gases exceed 83.4 ppm, 20.3 ppm, 142.3 ppm, 0.85 ppm, and 0.55 ppm, respectively. The detection limit of the system is calculated and can achieve up to 1.44 ng/m3 in 10 minutes. Measurements on mercury sample gas and air are carded out, and the measured data are compared with the data of RA-915 mercury analyzer （Russia）. The result shows that the correlation coefficient reaches up to 0.967. The experimental results indicate that the transverse Zeeman background correction method can be used to quantify trace mercury in air with high-precision.     

忆阻器:一种具有革命性意义的技术

综述了忆阻器的发明,忆阻器是2 500年前古中国神秘主义哲学家给出的一个设想,其发明可媲美门捷列夫化学元素周期表、发现太阳系行星、发现"上帝粒子"、发现宇宙超对称、捕捉到黑能量。忆阻器被称为电路世界中的第四种基本电路元件,将对未来计算和电子工程等领域产生深远的影响。     

红外双波段双层谐衍射光学系统设计

将谐衍射透镜应用在传统红外单波段佩茨瓦尔(Petzval)物镜上,设计得到工作波段处于3.4~4.2μm和8~11μm的红外双波段单层谐衍射光学系统。但单层谐衍射元件的衍射效率只在设计波长处衍射效率最高,随着波长相对设计中心波长向两侧偏离,主衍射级次的衍射效率逐渐下降。为提高含单层谐衍射元件光学系统的衍射效率,基于双层衍射元件衍射效率表达式研究了双层谐衍射元件的结构优化,给出了优化方法。设计出佩茨瓦尔型红外双波段双层谐衍射光学系统,其在3.4~4.2μm和8~11μm两个工作波段的衍射效率均达到90%以上,相比含有单层谐衍射面的光学系统衍射效率有了很大提升,提高了像面衬比度,完善了系统成像质量。     

Rotating polarizer,compensator, and analyzer ellipsometry

In this paper we propose theoretically a set of ellipsometric configurations using a rotating polarizer, compensator, and analyzer at a speed ratio of N1ω：N2ω：N3ω. Different ellipsometric configurations can be obtained by giving different integral values to N1, N2, and N3. All configurations are applied to bulk c-Si and GaAs to calculate the real and imaginary parts of the refractive index of the samples. The accuracies of all ellipsometric configurations are investigated in the presence of a hypothetical noise and with small misalignments of the optical elements. Moreover, the uncertainties in the ellipsometric parameters as functions of the uncertainties of the Fourier coefficients are studied. The comparison among different configurations reveals that the rotating compensator–analyzer configuration corresponds to the minimum error in the calculated optical parameters.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工 质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

基于瑞利-索末菲积分的大衍射角衍射光学元件设计方法

针对现有的衍射光学元件设计方法只适用于小角度衍射的情况,本文提出了一种基于瑞利-索末菲衍射积分的设计方法,可以用来设计具有大衍射角的衍射光学元件。先对目标光场进行坐标变换和强度调整,再利用改进的Gerchberg-Saxton算法优化得到衍射光学元件的相位分布。分别采用本文方法和原有的基于夫琅禾费衍射积分的方法设计衍射光学元件实现线条结构光和不同角度方框图形的光场重构,结果表明:原有的设计方法只适用于衍射角全角小于25°的情况,当衍射角大于25°时,重构光场会出现显著的枕形畸变和不均匀的强度分布。而本文方法在小角度和大角度衍射下都能重构出准确的衍射角和较为均匀的强度分布.