微波消解ICP-AES法测定玩具塑料中镉

采用微波加压消解溶样，ICP-AES法测定玩具塑料中镉含量，选择最佳工作条件，方法简便、快速、可靠。适用于各类玩具塑料中镉含量的分析。     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

微波诱导等离子体热解法合成碳膜包裹的TiO2纳米微晶

微波诱导等离子体热解法合成碳膜包裹的ＴｉＯ２纳米微晶刘洪波（广东石油化工高等专科学校广东茂名５２５０００）洪品杰戴树珊（云南大学化学系云南昆明６５００９１）关键词微波诱导等离子体包裹碳膜ＴｉＯ２纳米微晶中图分类号Ｏ６１４．４１１近年来，对碳膜包裹型材...     

尼泊金酯类的微波合成

尼泊金酯类防腐剂(即对羟基苯甲酸甲、乙、丙、丁酯)由于毒性极低,无刺激性及适用于较宽pH范围等特点,广泛用于食品、化妆品和医药工业。该类防腐剂无论是采用国际流行的工艺或国内生产工艺,均存在酯化时间长(一般为5h)、产率低等问题。虽经改进,但也需3h以上,且添加去水剂-苯后,不仅使工艺难     

微波辐射下一步合成3-氨基-4-氰基-1-芳基-5,6,7,8-四氢异苯并吡喃

亚环己基马来腈与芳醛在哌啶催化下,经微波辐射一步合成3-氨基-4-氰基-1-芳基-5,6,7,8-四氢异苯并吡喃,反应7～11min,产率57%～94%.     

超声雾化进样微波诱导等离子体原子吸收光谱法测定银的某些影响因素研究

本文将超声雾化技术与MIP-AAS联用,以“L”型吸收管代替“T”型吸收管作为AAS测量的吸收池,采用水冷凝和浓H_2SO_4吸收相结合去溶,研究TUSN-MIP-AAS方法测银时的某些影响因素,讨论了微波前向功率,载气流速、去溶系统、溶液酸度、共存离子及易也离元素等对吸收信号的影响,本法所得的测银的特征浓度为0.01μg/ml(328.1nm)和0.03μg/ml(338.3nm),相对标准偏差为7.5％.     

微波辐射下4-(4-羟基-3-甲氧基)苯基-3,3,6,6-四甲基-1,8-二氧代1,2,3,4,5,6,7,8,9,10-十氢吖啶的合成和晶体结构

标题化合物C24H29NO4?1/2C2H5OH稨2O)由香兰素、5,5-二甲基-1,3-环己二酮、醋酸铵在微波辐射下干反应并经95%乙醇重结晶而得C24H29NO4穀2(C2H5OH稨2O)晶体。结构通过单晶X-射线衍射法确定,其晶体属单斜晶系,空间群P21/n, a = 9.810(2), b = 14.516(3), c = 17.008(3) ? b = 101.03(2), V = 2377.2(8) ?, Z = 4, Mr = 427.52, Dc = 1.195 g/cm3 , m(MoKa) = 0.082 mm-1, F(000) = 920。晶体结构用直接法解出,经全矩阵最小二乘法对原子参数进行修正,最终的偏离因子为R = 0.0406, wR = 0.0892。X-射线衍射分析结果表明,吡啶环和与之稠合的2个六员环均为信封式构象。     

Structureal Study of Inclusion COmplex of Adrographolide with β-Cyclodextrin Prepared under Microwave Irradiation

An inclusion complex of β-cyclodextrin with andrographolide (Andro) was prepared by using a convenient method of microwave irradiation.The structure of the inclusion complex was determined by the ^1H NMR,2D NMR spectroscopy as well as the elemental analysis.     

微波化学

本文从微波的概念、微波的产生、传输及其加热原理和主要特点出发，简单介绍微波技术在化学中的应用。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.