Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Mid—Infrared Optical Parametric Oscillator Based on All—Solid—State—Pumped Periodically Poled LiNbO

We report the tunable mid-infrared generation with a periodically poled LinbO3(PPLN).Using an all-solid-state pumped Nd:YVO4 laser as the pump source and a PPLN nonlinear crystal with grating periods of 28.2-30.8μm,we have achieved wavelength conversion in the 2.90-4.05μm spectral range by period tuning.The use of confocal cavity design has brought a compact,all-solid-state configuration with an average output powers of idler up to -200mW.The maximum power of 277mW was obtained at the wavelength of 3.35um.     

激光微加工技术在ICF中的应用

建立以二极管泵浦的Nd：YAG连续固体激光器为基础的微结构加工平台。激光器谐振腔输出基横模，输出波长1064nm，采用调Q技术压缩脉宽，激光器输出峰值功率大于10w，可选择连续及脉冲工作方式。     

固体激光器的灯泵浦和二极管泵浦方式比较

对固体激光器的灯泵浦和二极管泵浦方式进行了比较,详细分析了不同类型的固体激光器所适用的泵浦方式.指出二极管泵浦固体激光器是今后固体激光器的发展趋势.     

激光二极管抽运的GaAs被动Q开关Nd：YVO4激光器

利用固体可饱和吸收体砷化镓（GaAs）作为被动调Q元件，实现了激光二极管抽运平－凹腔掺钕钒酸钇（Nd:YVO4）激光调Q运转，详细测量了砷化镓被动调QNd:YVO4激光输出特性，获得脉宽15ns，重复频率470kHz，光束质量M^2=1.31的激光输出，调Q激光运转阈值为500mW，并数值求解了砷化镓被动调Q速率方程，讨论了被动调Q机理以及调Q脉冲宽度和脉冲重复频率对抽运速率的依赖关系，理论计算结果与实验结果相一致。     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

Investigation of External Optical Feedback Resistance of IC—DFB and GC—DFB Lasers Using a Very Simple Experimental set—up

We study the external optical feedback resistance of both index-coupled(IC) and gain-coupled distributed feed-back(DFB) lasers using a very simple experimental set-up.Though IC-DFB lasers with large coupling coefficients are found to be less sensitive to external reflection,they suffer from mode instability at high injection level.On the other hand ,the introduction of gain-coupling mechanism can significantly improve both the immunity of external optical feedback and the single mode yield of the device.     

多棒串接固体激光器谐振腔的研究

运用矩阵光学的方法对多棒串接固体激光器的谐振腔参数及其在平平腔时的热稳条件进行了研究，并计算了六棒串接平平腔固体激光器的稳定区.结果证明：多棒串接固体激光器的稳定区和非稳区相互间隔，在平平腔总腔长、激光棒数量n和棒间距L一定的条件下，当采用对称结构时(L₁=L₂)，则谐振腔的每段稳定区均达到最大；且只要 平平腔满足L₁=L₂=L/2以及热焦距f在大于某个下限值f_m时，稳定性条件01< 关键词： 多棒串接固体激光器 稳定区 热稳条件     

半导体激光器在光谱研究中的应用

近年来半导体激光器的发展引人注目，已由红外波段推向可见光区，可靠性和输出功率提高而价格下降，在光谱研究方面的应用也日益广泛。文章介绍了半导体激光器的现状，频率稳定、压缩线宽和调谐波长的方法，以及半导体激光器在吸收光谱、非线性光谱、原子的冷却和光泵浦原子钟等方面的应用。