《化学研究》2012年第23卷1～6期总目次

<正>~~     

累积轧制Ti／AI复合材料的微观结构演变和力学性能研究

用累积轧制法成功制备了平均晶粒尺寸为200--300nm的超细等轴晶Ti／A1多层复合材料．研究了Ti／A1多层复合材料的微结构变化和力学性能．     

微米级PS-PEDOT核壳型导电微球的合成与拉曼表征

以分散聚合法制备的微米级聚苯乙烯(PS)微球为模板、3,4-乙烯二氧噻吩(EDOT)为单体、过硫酸铵(APS)为引发剂,通过氧化聚合制备了PS-PEDOT核壳型复合导电微球。采用扫描电镜、透射电镜等对导电微球的形貌和结构进行了表征,重点采用拉曼光谱研究了其核壳结构特征。并研究了超声分散、溶液pH以及单体配比对导电微球形貌的影响。实验结果表明:超声的引入可提高导电微球的单分散性,改善微球的形貌。随着pH的降低或单体配比的增加,导电聚合物在PS微球表面的负载量随之增加,当m(EDOT)/m(PS)由0.60增加到1.25时,导电微球的平均粒径由1.76μm增加到1.91μm。     

石墨烯基复合材料应用于光电二氧化碳还原的基本原理，研究进展和发展前景

In response to aggravated fossil resources consuming and greenhouse effect, CO₂ reduction has become a globally important scientific issue because this method can be used to produce value-added feedstock for application in alternative energy supply. Photoelectrocatalysis, achieved by combining optical energy and external electrical bias, is a feasible and promising system for CO₂ reduction. In particular, applying graphene in tuning photoelectrochemical CO₂ reduction has aroused considerable attention because graphene is advantageous for enhancing CO₂ adsorption, facilitating electrons transfer, and thus optimizing the performance of graphene-based composite electrodes. In this review, we elaborate the fundamental principle, basic preparation methods, and recent progress in developing a variety of graphene-based composite electrodes for photoelectrochemical reduction of CO₂ into solar fuels and chemicals. We also present a perspective on the opportunities and challenges for future research in this booming area and highlight the potential evolution strategies for advancing the research on photoelectrochemical CO₂ reduction.     

结晶紫在导电碳黑糊电极上的伏安行为及其检测

结晶紫(CV)在导电碳黑糊电极(CCBPE)上具有灵敏的伏安响应,实验对其氧化还原机理进行了推导,结果表明:以pH 8.0的B-R缓冲液为支持电解质,CV发生2电子转移的不可逆氧化,过程受吸附控制。在富集时间、富集电位、pH等影响因子得到优化情况下,其半微分-脉冲伏安扫描氧化峰值与其浓度在0.03~1.30μmol/L范围内呈线性,检出限为10 nmol/L。据此建立了CV的电化学快检方法,并应用于淡水渔业水体中痕量CV的测定,平均回收率为97.1%。     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

高柔性PVA-co-PE纳米纤维基复合导电透明膜的制备及性能研究

将具有独特叠层结构的聚乙烯醇-聚乙烯共聚物纳米纤维膜材料与环氧树脂复合,并引入紫外光吸收剂2,4-二羟基二苯甲酮,利用多相之间的强界面相互作用,制备得到了具有高柔韧性、高透明度和高紫外光过滤效果的复合透明膜.在该柔性基底上,通过压力转移法相继复合银纳米线层和还原氧化石墨烯层,形成了相互渗透的导电网络.最终得到面电阻为147Ω/Sq、可见光透过率约80%、紫外吸收率达90%的透明导电复合膜.该导电复合膜显示出良好的拉伸和弯曲性能,并在循环弯曲变形测试下保持良好的电学稳定性.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

MODELING CONTACTS OF IONIC POLYMER METAL COMPOSITES BASED TACTILE SENSORS

We report the first attempt to model the contacts of an ionic polymer metal composite（IPMC） based tactile sensor. The tactile sensor comprises an IPMC actuator, an IPMC sensor and the target to be detected. The system makes use of multiple contacts to work： the actuator comes into contact with the sensor and pushes the movement of sensor; the contact between the sensor and the object detects the existence and the stiffness of the target. We integrate modeling of various physical processes involved in IPMC devices to form a simulation scheme. An iteration and optimization strategy is also described to correlate the experimental and simulation results of an IPMC bending actuator to identify the two key parameters used in electromechanical transduction. Modeling the multiple contacts will aid the design and optimization of such IPMC based soft robotics.