碳酸氢铵与氯化钇反应及结晶产物的组成和晶相类型

The relationships of crystal type, crystallization speed, purity, grain size and shape of rare earth carbonate with precipitation and crystallization conditions are very important for the production of rare earth carbonate with high efficiency, high quality and low cost. It is necessary for us for further understand the crystallization process mechanism and the factors effect on the crystallization. In the present paper, the crystallization characteristic, composition and crystal phase type of yttrium carbonates or ammonium yttrium carbonates precipitated from yttrium chloride solution using ammonium bicarbonate as precipitant were determined by chemical analysis, X-ray powder diffraction and the pH situ-determination. It was found that the crystal phase type was dominated by the feed molar ratio of ammonium bicarbonate to yttrium chloride, and the crystallization speed and the crystal composition were also influenced by temperature, feed manner and aging period etc. When precipitating and aging under lower temperature, crystallization is easy to take place in the high feed molar ratio zone, and when increasing tempera-ture, crystallization will take place both in lower and higher feed molar ratio zones. The results show that spherical yttrium carbonate with tengerite type crystal phase can be formed within the temperature 30～70℃ when feed molar ratio of ammonium bicarbonate to yttrium chloride is less than 4, and that a rhombus flake crystal, which possesses the composition of ammonium yttrium quasi-double carbonate and a new XRD pattern, is formed when the feed molar ratio is over 4. Their compositions can be represented as (NH₄)_aY(CO₃)_b(OH)_c·nH₂O, a< 1, 1< b< 2, c=3+a-2b. A fine crystal of ammonium yttrium double carbonate with the formula of (NH₄)Y(CO₃)₂·H₂O can also be obtained as using an enough amount of ammonium bicarbonate and aging enough time.     

苯乙烯-氧乙烯-苯乙烯三嵌段聚合物的受限结晶行为的反气相分析

 采用反气相法研究了苯乙烯 氧乙烯 苯乙烯三嵌段结晶聚合物 (PS PEO PS)的结晶熔融相变 ,测定了PS PEO PS的结晶度、熔点以及熔程 ,探讨了正构烷烃探针分子的碳链长度对测定结果的影响。研究结果表明 :PS PEO PS的微相分离对PEO链段的结晶行为有较大的影响 ,其晶体结构中存在由多种不完善PEO结晶和PS非结晶构成的中间层 ;正构烷烃探针分子的碳链长度对测定PS PEO PS的熔点和熔程无影响 ,但对结晶度测定和PEO结晶熔融相变的检测影响较大 ,所测得PS PEO PS的结晶度随正构烷烃探针分子碳链的增长而降低。     

Zn(Leu)SO4·0.5H2O在丙酮－水混合溶剂中的结晶动力学

确定了Zn(Leu)SO4·0.5H2O在水－丙酮中结晶生长的最佳体积比为1：5,用微 量热法测定了该结晶生长过程在298.15K时的放热量及产热速率,计算了动力学常 数,认为结晶过程符合Burton-Cabrera-Grank位错理论。同时测定了Zn(Leu)SO4· 0.5H2O 298.15K时在纯水中的溶解焓为（3．17±0．09）kJ·mol^-1,计算了Zn (Leu)^2+(aq)的标准生成焓为（－1088.26±4.28)kJ·mol^-1。     

3Li2O·B2O3-20%LiCl-H2O过饱和溶液20℃结晶动力学研究

配制3Li2O*B2O3-20%LiCl-H2O过饱和溶液在20±0.1℃恒温水槽中静置.采用结晶动力学方法研究过饱和溶液的结晶过程,此过饱和溶液结晶后析出Li2O*B2O3*4H2O一种固相,拟合给出结晶动力学方程,同时对结晶反应机理进行了探讨.     

Preparation and Charactrization of Fibrous Crystals of Boron-containing MTW-type Zeolite

Fibrous crystals of boron-containing MTW-type zeolite have been hydrothermally synthesized in B2O3-SiO2-HF-H2O gel system at 170℃ in 20 to 28d by using 1,4-diazabicyclo[2,2,2]octane (DABCO) and methylamine as the co-template, and characterized with XRD, SEM, TEM, HRTEM and SAED. The results of characterizations show that B atoms are incorporated into the zeolite framework as tetrahedron of B(OSi)4. The fibrous single crystals of 5-50μm in length and 100-500nm in width inter-grow along the c-axis of the zeolite, and the one dimension 12 oxygen ring channels are perpendicular to the fibber axis.     

纤维素芳族酯热致液晶对PET结晶成核作用的研究

用自制的热致液晶性纤维素芳族酯(CAE)作聚对苯二甲酸乙二醇酯(PET)的成核剂,研究了PET/CAE体系(CAE含量≤1%)在110～200℃温度范围内的等温结晶动力学特性.结果表明,CAE能显著加快PET结晶速率(Z),Z随结晶温度和CAE含量变化均有极大值Z_max(T_C)和Z_max(W_CAE),Z_max(T_C)对应的温度T_max随CAE含量增加而降低,CAE促进PET结晶的作用机理与普通成核剂不同.     

链缠结对聚合物结晶行为的影响

链缠结是聚合物分子链相互作用的一种形式 ,它主要影响分子链的长程运动 .自链缠结的概念被提出以来 ,人们对聚合物粘弹性、流变行为和网络平衡力学等进行了理论研究和实验验证 .然而 ,在聚合物结晶领域 ,链缠结对结晶过程的影响一直存在着很大的争论 .Flory等 [1] 认为 ,聚合物结晶时分子链根本没有足够的时间进行构象调整 ,分子链进入晶格后 ,使大量的缠结链段被挤入非晶区 ,并由此建立了聚合物结晶“插线板”模型 .Hoffman等 [2 ]根据单根分子链从过冷熔体“卷饶”到晶体前沿所需的时间进行估算 ,结果比 Flory预言的快约 3～ 5个数量级…     

Rietveld法在半结晶聚酯二相共存结构分析中的应用

用Rietveld法对试样的BaF2的实测X射线衍射全谱图(XDWP)数据进行精修，获得正确的结晶相结构参数，重点讨论了如何正确选择衍射峰型函数和评价精修结构参数的可靠性；特别指出，当把Rietveld法和Fourier过滤技术及径向分布函数(radial distribution function，RDF)联用来研究半结晶聚酯(PET)的两相结构参数时，除需用R因子判断结晶相之精修结构参数的可靠性外，还要判断由非品相散射强度数据计算的RDF是否合理；如果忽视后一判据，则有可能导致错误的计算结果。     

聚醚醚酮酮的结晶熔融行为

用差示扫描量热法（ＤＳＣ）研究不同热历史聚醚醚酮酮（ＰＥＥＫＫ）的结晶熔融行为。在２２５－３００℃等温热处理样品的ＤＳＣ曲线出现了熔融双峰。低温熔融峰峰温（Ｔｍｌ）较低，Ｔｍｌ与热处理温度Ｔｃ有关；高温熔融峰峰温（Ｔｍ２）较高，Ｔｍ２几乎不受Ｔｃ的影响。研究结果认为，在升温过程中存在结晶的熔融－重结晶过程，熔融双峰归因于结构相同而完整程度不同的ＰＥＥＫＫ结晶的熔融行为。还探讨了升温速度对结晶熔融行     

新型间位聚醚酮醚酮酮的合成与结晶

聚醚醚酮(ＰＥＥＫ)自八十年代初由英国ＩＣＩ公司开发并工业化以来,由于其优异的性能已在机械、航天等领域得到广泛应用.但ＰＥＥＫ的Ｔｇ只有143℃,影响了使用范围.因此其它聚芳醚酮类聚合物相继被开发出来.但这些聚芳醚酮的主链结构大都为全对位连接,使其熔点较高以至加工难度增大.因此,高Ｔｇ和低Ｔｍ的聚芳醚酮的合成是一项很有意义的工作.如果在聚合物的主链结构中引入间位结构,则可在对Ｔｇ影响较小的情况下降低熔点来改善加工条件[1,2].新型间位聚醚酮醚酮酮(ＰＥＫＥＫＫ(Ｔ/Ｉ))也是其中一种.本文主要研究ＰＥＫＥＫＫ(Ｔ/Ｉ)的合…