Synthesis,Characterization and Catalytic Activity of Salen Co(Ⅲ)Cl in Alternating Copolymerization of CO2 and Propylene Oxide

The title complex Salen Co(Ⅲ)Cl(Salen = 6,6’-((1E,1’E)-(cyclohexane-1,2-diylbis(azaneylylidene))bis(methaneylylidene))bis(2,4-di-tert-butylphenol)) was synthesized and characterized by elemental analysis, IR spectroscopy, 1H NMR and UV-Vis. The complex can be used as catalyst for the propylene oxide(PO)/CO2 copolymerization in different conditions of reaction time, reaction temperature, carbon dioxide pressure and monomer concentration, and the optimum conditions for copolymerization were obtained.     

A Chinese Lantern-like 2D Cu(Ⅱ) Coordination Polymer Constructed by Bis-imidazole and Dicarboxylate Co-ligands: Synthesis,Crystal Structure and Photocatalytic Activity

A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and characterized by single-crystal and powder X-ray diffraction, IR spectra, thermogravimetric analyses and elemental analyses. The single-crystal X-ray diffraction reveals that metal coordination polymer 1(MCP 1) shows a two-dimensional sheet layer structure, which is further reinforced through strong intermolecular hydrogen bonding to form a 3 D supramolecular framework. Furthermore, the photocatalytic experiment result indicates the degradation ratios of methyl orange(MO) reach 83.4% within 180 minutes when MCP 1 acts as catalyst.     

Bio-based and Biodegradable Electrospun Fibers Composed of Poly(L-lactide) and Polyamide 4

Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.     

The Crystallization and Melting Behaviors of PDLA-b-PBS-b-PDLA Tri-block Copolymers

In this study,the poly(D-lactide)-block-poly(butylene succinate)-block-poly(D-lactide)(PDLA-b-PBS-b-PDLA)triblock copolymers with a fixed length of PBS and various lengths of PDLA are synthesized,and the crystallization behaviors of the PDLA and PBS blocks are investigated.Although both the crystallization behaviors of PBS and PDLA blocks depend on composition,they exhibit different variations.For the PDLA block,its crystallization behaviors are mainly influenced by temperature and block length.The crystallization signals of PDLA block appear in the B-D 2-2 specimen,and these signals get enhanced with PDLA block length.The crystallization rates tend to decrease with increasing PDLA block lendth during crystallizing at 90 and 100°C.Crystallizing at higher temperature,the crystallization rates increase at first and then decrease with block length.The crystallization rates decrease as elevating the crystallization temperature.The melting temperatures of PDLA blocks increase with block lengths and crystallization temperatures.For the PBS block,its crystallization behaviors are mainly controlled by the nucleation and confinement from PDLA block.The crystallization and melting enthalpies as well as the crystallization and melting temperatures of PBS block reduce as a longer PDLA block has been copolymerized,while the crystallization rates of the PBS block exhibit unique component dependence,and the highest rate is observed in the B-D 2-2 specimen.The Avrami exponent of PBS crystallites is reduced as a longer PDLA block is incorporated or the sample is crystallized at higher temperature.This investigation provides a convenient route to tune the crystallization behavior of PBS and PLA.     

Competition between Liquid-liquid De-mixing,Crystallization, and Glass Transition in Solutions of PLA of Different Stereochemistry and DEET

Liquid-liquid(L-L)de-mixing and vitrification of solutions of either crystallizable poly(L-lactic acid)(PLLA)or non-crystallizable poly(D/L-lactic acid)(PDLLA)with 50 m%N,N-diethyl-3-methylbenzamide(DEET)were analyzed by calorimetry and cloud-point measurements,which allows drawing conclusions about the effect of polymer stereochemistry on the phase behavior.Regardless of the PLA stereochemistry,vitrification of the solutions on fast cooling,hindering crystallization of PLLA,occurred below-20℃ and suppressed prior L-L de-mixing.The experimental results prove that crystallization in samples containing crystallizable PLLA,observed at around 55℃ on slow cooling,is not preceded by L-L de-mixing.     

空心球状C@SnO2@SnS2的制备及光催化去除Cr（Ⅵ）性能研究

将SnO2负载在碳球上通过不完全烧结的方法得到含有大量碳的空心状C@SnO2,随后加入TAA(硫代乙酰胺),利用离子交换法在水热过程中制备了具有不同硫化程度的空心结构的C@SnO2@SnS2三元复合物。利用XRD、FESEM、TEM、XPS、UV-Vis DRS、PL等测试手段对合成样品进行表征,并测试了其光催化去除Cr(VI)的性能。结果表明,C、SnO2和SnS2三者之间的协同作用以及空心结构的形貌显著增强了SnO2的光催化性能,其中CSS-2样品对Cr(VI)具有最佳的去除能力,太阳光照射120 min后对Cr(VI)的去除率高达98.8%。     

CRISPR-Cas System for RNA Detection and Imaging

The system of clustered regularly interspaced short palindromic repeats(CRISPR)and CRISPR-associated endonucleases(Cas)have been widely used in gene editing,disease treatment,molecular diagnosis and chromosome imaging.On account of the programmable target recognition of CRISPR-Cas system and the specific targeting function toward RNA of type Ⅵ class Ⅱ Cas proteins,CRISPR-Cas system has been deployed as RNA recognition and detection tools,exhibiting promising application potentials in the field of RNA detection and imaging.In this review,we summarize the latest research progresses as well as development prospects of CRISPR-Cas system in RNA diagnosis and live cell RNA imaging.     

催化还原降解Cr(Ⅵ)

工业化的快速发展导致含有六价铬(Cr(Ⅵ))的废水排放量日益增加,Cr(Ⅵ)的毒性和高流动性造成极大的环境污染问题。将Cr(Ⅵ)还原成低毒性和低流动性三价铬(Cr(Ⅲ))是当前的有效处理方式之一。与传统方法相比,利用太阳光、电和微波等驱动氧化还原反应进行Cr(Ⅵ)降解,无催化剂消耗,还原剂用量少,且不会造成二次污染和有限资源损耗,成为处理Cr(Ⅵ)污染的有效解决方案。基于此,本文综述了光催化剂、电催化剂及微波催化剂等在还原Cr(Ⅵ)领域的应用现状,在总结分析前人研究成果的基础上,对今后Cr(Ⅵ) 催化还原技术的研究方向和重点进行了展望。     

金属有机框架材料在毛细管电色谱中的应用

金属有机框架材料(MOFs)是一类由金属离子或金属簇与有机官能团通过配位键形成的新型有机-无机杂化晶态多孔材料, 具有比表面积大、热稳定性和化学稳定性高、结构及功能多样等特点, 是毛细管电色谱(CEC)领域研究较多且具有优异应用前景的一类新型纳米材料固定相.综述了近年来MOFs在CEC中的研究进展, 主要包括新型制柱技术的发展及其在分离领域的应用, 并对该领域今后的发展方向进行了展望.     

硫酸分离–火试金重量法测定碲化铜中的金和银

建立了用硫酸分离-火试金重量法测定碲化铜中的金和银含量的方法。用硫酸溶解碲化铜样品,过滤,除去铜和碲,得到含金、银的沉淀物,沉淀物经灰化、配料、高温熔融制得铅扣。将铅扣灰吹,得到金银合粒,用硝酸溶解分离金,用重量法测定金含量。用金银合粒的质量扣除金粒的质量和分金液、洗液中杂质的质量即为银含量。采用灰皿、残渣熔融法补正,或用含碲、铜物料做基体加入纯金、纯银同试样方法测定,根据金、银的回收率加以补正,从而得到试样中的碲含量。实验结果表明,浓硫酸的加入量为30 mL,残余量应不少于15 mL。火试金中硅酸度为1左右,试样进炉温度以900℃为宜。该方法金、银测定结果的相对标准偏差分别为0.33%~1.97%,0.28%~1.27%(n=9)。金的回收率为98.5%~100.2%,银的回收率为95.5%~101.4%。该法满足生产控制检测和贸易结算的要求。