Tuning the solid-state emission of the analogous GFP chromophore by varying alkyl chains in the imidazolinone ring

New analogues of green fluorescent protein (GFP) chromophore mGFP-Cn (n = 1, 3, 5, 11) with alkyl chains of different lengths in the imidazolinone rings were synthesized and their crystal structures were determined. These GFP-like chromophores are all emissive in the solid state. And the solid-state emission quantum yields of increase by extending the lengths of alkyl chains, owing to the fact that the intermolecular pi-pi interactions are significantly weakened based on their crystal structures.     

Theoretical studies on selectivities in the Staudinger reaction of vicinal diimines and ketenes

The selectivities,including peri-,regio-,and diastereoselectivities,in the Staudinger reaction involving vicinal diimines and ketenes were investigated theoretically via the density functional theory(DFT) calculation.The results indicate that vicinal diimines prefer stepwise [2+2] cycloaddition rather than [2+4] cycloaddition to generate cis-4-imino-β-lactams.The diimines attack the less sterically hindered exo-side of ketenes to generate zwitterionic intermediates,which directly undergo a conrotatory ring closure to produce cis-4-imino-β-lactams whatever diimines with less or more bulky N-substituents.For unsymmetric vicinal ketoaldehyde-derived diimines,their ketimines attack the exo-side of ketenes and undergo a conrotatory ring closure to produce cis-4-aldimino-β-lactams due to less steric effect.The current theoretical studies provide very important information for in-depth understanding of the selective formation of mono-cis-β-lactams from vicinal diimines and ketenes.     

DFT/TDDFT investigation on bis-cyclometalated alkynylgold(III) complex: Comparison of absorption and emission properties

absorption and phosphorescent mechanism of three Au(III) complexes, Au(2,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au25FPh], Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au35FPh], and Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(1H-indole)2 [Au35FID], are calculated and compared using density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results reveal that enlarging the center C^C^C ligand will result in the enhanced LMCT participation. This theoretical contribution allows design of new Au(Ⅲ) complexes with higher phosphorescence efficiency.     

应用TG-FTIR技术研究黄土庙煤催化热解特性

用浸渍法制备过渡金属氧化物担载型催化剂MO_x/USY(M=Co、Mo、Co-Mo),用热重红外联用技术考察了MO_x/USY催化剂对黄土庙(HTM)煤热解失重特性和热解产物生成规律的影响。热重实验结果表明,MO_x/USY催化剂可使HTM煤热解的二次脱气条件更为温和,热解峰温分别提前14、23和9℃。动力学分析结果表明,MO_x/USY催化剂可降低HTM煤样热解的活化能。FT-IR研究表明,MO_x/USY催化剂可有效改善HTM煤热解产物的组成和分布,CoO_x/USY催化剂能显著提高HTM煤热解产物中高热值气体(CO、CH₄)和轻质芳烃以及脂肪烃类化合物的含量;MoO_x/USY催化剂没有明显改善HTM煤热解产物组成和分布;MoO_x-CoO_x/USY催化剂可促进CO、CH₄、轻质芳烃和脂肪烃类化合物的生成,却使热解产物的生成向高温区移动,说明USY负载的不同过渡金属氧化物对煤样热解行为和热解产物有较大影响。     

利用直接融合法合成C(8)-戊基鸟苷

报道了C(8)-戊基取代鸟苷的直接合成法.首先,以高效、简洁的方法合成了C(8)-戊基取代鸟嘌呤,并且分离到了磷亚胺中间体,通过核磁和质谱等手段加以确定,从实验层面验证了亚硝基法合成C(8)-取代嘌呤的机理;其次,通过该鸟嘌呤与核糖直接融合进行糖基化,制备了C(8)-戊基取代鸟苷,开辟了一条C(8)-碳取代鸟苷的绿色合成方法.     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

SAPO-11分子筛晶化过程研究

采用X射线衍射、X射线荧光光谱、扫描电镜和固体核磁等方法研究了SAPO-11分子筛的水热晶化过程.结果表明,晶化初期,SAPO-11和一种具有磷硅铝组成的未知晶相同时生成;随着晶化的进行,中间相溶解,SAPO-11的生成速率大大增加,呈现快速晶化的特征;至2.33h后,SAPO-11的结晶度接近100%,并保持至晶化结束.硅从晶化初期即参与了SAPO-11的形成,它在晶体中的含量随晶化时间的延长而逐渐增加.硅原子主要以硅岛的形式分布于SAPO-11分子筛骨架中,从而导致多种硅配位环境的存在.分析显示,SAPO-11分子筛呈现外表面富硅的特点,结合晶化过程的分析可推测,硅在SAPO-11分子筛晶体中的分布不均匀,其含量从内向外递增.     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.