Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

The radiation directivity of a complicated conformal array of underwater acoustic transducers is presented based on the boundary ＂element method. It includes the element directivity of each transducer, the natural beam pattern and the controlled beam pattern of the transducer array. At first, the boundary element model of the conformal array is built up, and then the boundary condition is exerted on the model according to the design and environment in which the transducer array is used, and the radiation directivity of the conformal array is calculated. An experiment has been done to measure the directivity in an anechoic water tank. The calculated and the experimental results are compared and analyzed. They are consistent to each other. It is shown that the boundary element method together with the detailed calculations is successful to simulate and predict the radiation directivity of an underwater acoustic transducer array.     

《应用声学》2014年总目次 第33卷 第1-6期

正~~     

Practical absorption limits of MPP absorber

The construction and properties of microperforated panel (MPP) absorber are discussed. The absorption limit of the absorber had been shown that low values of the perforate constant k = d(f/10)1/2 and the orifice diameter d (in mm) are essential for MPP to have high absorption in wide frequency band. To find the exact limits, take 1 for k as a start, because both specific resistance and high absorption require k around one. And the orifice diameter d is chosen as 0.1 mm, so that the peak absorption coefficient (resonance absorption) is at 1000 Hz, and high sound frequency may be in the absorption region. Is it possible for a single layer of such an MPP to cover the whole absorption region required in practice? The half-absorption limit is not a good criterion, because low absorption comes in also in some cases. The 0.5 absorption coefficient limit is suggested for practical region, as a standard for comparison. Absorption curves were drawn for different load resistances, of absorption coefficients versus frequency. Ordinary MPP absorber absorbs in slightly over two octaves, and the new absorber with r = 1 (specific resistance equal to the characteristic impedance in air)is slightly better than these, 2.5 octaves. The new absorbers with r > 1, are much better than these, and some satisfies high absorption in broad frequency range. Realization of these will mean great progress of MPP absorbers.     

一个新的IEC61000-4-2标准ESD电流解析表达式

分析了两个ESD标准电流波形表达式,并提出一个新的基于脉冲函数来描述ESD标准电流的解析表达式,该表达式符合最新的标准IEC61000-4-2,在零时刻的电流及其微分部为0,且波形与实际测量波形基本吻合。     

用于矢量水听器的低频高灵敏度层合梁加速度传感器

压电加速度传感器是同振型矢量水听器的核心部件。为了满足低频高灵敏度矢量水听器的应用需求,提出并研究一种具有层合梁结构的低频高灵敏度加速度传感器。结合弹性力学和压电方程推导层合梁加速度传感器的加速度灵敏度解析解表达式,通过有限元仿真对层合梁加速度传感器尺寸进行优化,给出优化后的尺寸范围。从优化的尺寸范围中选取两种不同尺寸进行加速度传感器振动特性的仿真分析及实物制作(其中压电材料为PZT-5)与性能测试。仿真与测试结果均表明,相比已有的同尺寸金属梁加速度传感器,层合梁加速度传感器可以有效降低谐振频率并提升加速度灵敏度。当压电层厚度为0.5 mm时,加速度灵敏度最大提升3.9 dB,谐振频率下降23%。测试结果与理论分析相符。     

一般观念统领下的“初小衔接”要衔接什么、如何衔接北大核心

0引子2022年4月21日教育部颁布的《义务教育数学课程标准(2022年版)》(以下简称“课标”)是我国继续深化课程改革落实立德树人根本任务过程中的一个标志性文件.本次课标修订在2011版的基础上对课程内容做了适当的调整,使课程内容更具结构化,实现“作为研究对象的数学”和“作为学习对象的数学”的和谐统一。     

一道高考题的思考与研究

<正>~~     

利用对称性巧解一道题

<正>~~     

超高强度钢（35CrNi3Mo）化学成分标准物质研制

采用与超高强度钢,台炼过程相同的工艺制备了35CrNi3Mo化学成分标准物质。对标准物质的制备技术、均匀性检验、稳定性考察进行了分析。研制的35CrNi3Mo化学成分标准物质具有良好的均匀性和稳定性。采用8家实验室进行协作定值,对定值结果的不确定度进行评定,各组分定值结果的相对扩展不确定度小于13％。     

2016年中国海洋声学研讨会会议通知

2016年中国海洋声学研讨会会议通知