瞬态位移干涉仪信号处理新方法

利用短时傅里叶变换计算速度快的特点,先对瞬态位移干涉仪信号进行预处理,得到速度的轮廓范围.据此估计小波变换中尺度因子的范围,然后用连续小波变换的方法对信号再次进行处理,用此方法分析计算机模拟出的位移干涉信号,恢复的速度相对误差小于2％.对高速爆轰实验中的位移干涉信号分别采用短时傅立叶变换、小波变换和二者相结合的方式进行...     

Change in Continuous Detonation Wave Propagation Mode from Rotating Detonation to Standing Detonation

We perform a three-dimensional numerical simulation based on a one-step chemical reaction model to investigate changes in the mode of H2-Air detonation wave propagation from rotating detonation wave （RDW） mode to standing detonation wave mode. The physical characteristics of an RDW with injection velocity of 500 m/s are analyzed to investigate the physical mechanisms involved. We find that with increasing injection velocity, the detonation wave gradually changes from perpendicular to the head wall to parallel to the head wall. When the injection velocity exceeds the Chapman-Jouguet velocity VCJ （about 1984 m/s）, the detonation wave changes orientation to become perpendicular to the fuel injection direction, and the rotating mode changes accordingly to a standing mode. Finally, the plane detonation characteristic triple-wave structures can be found from the standing mode.     

关于声波传递速度的新发现

 声在水中的传播速度大约为每秒1500米。当水冻成冰时,声在其中的传播速度升至每秒4000米左右。这种性质蕴含着一个几乎是公认的假设:对于任一种物质,声波在其固态物质中的传播速度大于在其液态物质中的速度。     

分离流动的脉冲热线测量方法研究与应用

1引言分离流动经常出现在许多实际流动中，对流体机械和飞行器产生重大影响。但由于这种流动具有方向性，变化快，给测量带来了困难。到目前为止，主要有以下三种测量方法：山激光多普勒测速治（＊D川；（2）飞行热线（F坊In含＊。卜w让e）；O）脉冲热线技术（PulsedAVire。‘脉冲热线”比“激光多普勒测速仪”价格低一个数量级，操作简单，是一种比较理想的测量技术。其原理最初由Baner山提出，随后经过BradburyP］，Eaton问，Castro＊和Fernholz问等人不断发展与完善，目前国外正推广应用在分离流动的研究中。但在国内，尚不多见其…     

弹性撞击速度的激光分束测量技术

 研制了一个激光分束测速系统。它由一台4mW He-Ne激光器，一个将单束激光分成10束相互平行的等间距（间距为5 mm）激光的分光器，一个高灵敏度、工作状态自检、可进行波形合成、10路接受、一路输出的光电接收转换装置，一台数字存贮示波器，以及微型计算机组成。可进行弹性撞击速度的测量。     

表面张力-重力短峰波作用的海底边界层速度二阶解

依据最近提出的三阶表面张力-重力短峰波理论,通过求解经典的Prandtl边界层方程,给出海底边界层速度的二阶解析解,为确定海底边界层的质量输运提供了一个必备的先行理论基础.     

Blind convolutive separation method for speech signals via joint block diagonalization

A blind speech source separation method for the overdetermined convolutive mixture model in time-domain is proposed via joint block-diagonalization based on the mutual- independence and short-time stationarity properties of the speech signals. Taking the sum of the F-norms of all off-diagonal sub-matrices as a criterion, a novel joint block-diagonalization method is proposed to estimate the whole mixture matrix through minimizing a sequence of quadratic sub-functions corresponding to mixture sub-matrices. Both theoretical analysis and simulations show that the proposed method has much lower complexity and faster convergence speed than the classical Jacobi-like method with no performance loss. In addition, there are almost no obvious impacts of the channel order and initialization values on the convergence speed.     

旋转热管生物反应器的流场模拟研究

采用热管技术对传统生物反应器进行革新,自主开发出一种适用于多种生物反应的新型生物反应器,提出了将热管本身作为搅拌轴的设计思想,同时以计算流体力学(CFD)为基础建立旋转热管生物反应器的数学模型,计算了不同雷诺数下此类搅拌轴的功率准数,并得到了功率曲线。采用标准k-ε湍流模型成功模拟了反应器内的速度分布,为反应器的优化设计提供了基础。     

Structural Feature and Solute Trapping of Rapidly Grown Ni3Sn Intermetallic Compound

The rapid dendritic growth of primary Ni3Sn phase in undercooled Ni-30.9%Sn-5%Ge alloy is investigated by using the glass fluxing technique. The dendritic growth velocity of Ni3Sn compound is measured as a function of undercooling, and a velocity of 2.47m/s is achieved at the maximum undercooling of 251 K （0.17TL）. The addition of the Ge element reduces its growth velocity as compared with the binary Ni75Sn25 alloy. During rapid solidification, the Ni3Sn compound behaves like a normal solid solution and it displays a morphological transition of ＂coarse dendrite-equiaxed grain-vermicular structure＂ with the increase of undereooling. Significant solute trapping of Ge atoms occurs in the whole undercooling range.     

内螺纹肋管内流动与传热的数值模拟

本文以空气为介质(Pr=0.698),通过数值模拟的方法在Re=600-2000的范围内对内螺纹肋管内周期性充分发展的层流流动进行了模拟分析,说明了不同Re、螺纹肋的旋转角度α、螺纹肋的牙数N8对速度环量、Nu、Nu和阻力系数的影响,并通过对Nu和速度环量之间的关系进行了分析,得出在内螺纹肋管内强化换热流动中决定换热强度的物理量一速度环量。