微通道板及其发展趋势

回顾微通道板发展历史及各阶段的主要技术特征。综述自90年代以来国内外微通道板的研发和生产情况．     

Experimental and Theoretical Evidence for the Existence of Broad Forbidden Gaps in the Three—Component Composite

The influence of localized resonance on the properties of band-gaps of the two-dimensional periodic composite are analysed numerically and experimentally by comparing the two-component phononic crystal with the three-component one. The three-component composite which exhibits localized resonance in the elastically soft coating ring is composed of a square array of coated cylinders embedded in an epoxy resin. The coated cylinders consist of a steel inner core and a rubber coating, which has much smaller wave velocity and mass density than the matrixand tile inner material. Tile measured transmission power of tile three-component composite drops to the noise level in a broad ultrasonic frequency interval in contrast to the binary composite, which is in good agreement with the calculation using the finite element method.     

电极电势φ对电化学反应速率的影响

讨论电极电势ψ与电化学反应速率之间的关系,并对电化学中经常遇到的概念、公式进行论述.针对ψ、η、 0、 t0、k、kt0、ψe、β等容易混淆的符号及含义,通过详尽推导,加以澄清,强调了电化学与动力学之间的联系.     

时域介电谱方法及其应用

提出了微分和二次微分时域介电谱方法。极化响应可描述为exp[-(t/τ)^α]类型若干个分得很开的峰,峰的线型决定α,它有1和1/2两个典型值.极化机构种类和峰的个数相等,峰高给出各机构对极化贡献的成份.响应时间τ由峰的位置定决,谱线的分离说明习惯设α=1而令τ有连续分布的看法缺乏根据,在石蜡中观察到温度升高时,指数增大,石蜡熔解过程中出现时域谱线分裂,从中可得到分子链运动的许多信息。     

用Technicolor理论研究稀有辐射衰变Bc→Dsγ

在一代Technicolor(TCI)和带有一个无质量的标量二重态(TCⅡ)模型下,计算荷电的哥尔斯通粒子对衰变B_c→D_sγ的贡献,并把它们同标准模型的计算相比较,发现哥尔斯通粒子对电磁企鹅图的贡献很大(TCI下),在TCⅡ下贡献较小;而对弱湮没图的贡献可以忽略不计,还对同位旋三重态粒子π+p的质量进行了约束. 预言将来在LHC上能对不同模型下的分支比Br(B_c→D_sγ)的差异进行研究,进而对不同的模型进行检验.     

硫化锌掺钴对电子结构和光学性质的影响

根据密度泛函理论对钴掺硫化锌周围的品格进行了结构优化,计算得到了钴杂质周围的晶体结构、电子态密度分布和吸收光谱.计算结果表明,由于Co原子掺入ZnS晶格常数减小,导致晶格畸变;带隙变窄;吸收峰展宽至更长波长区域.     

Solutions for a Mode Ⅲ Growing Crack in a Piezoelectric Plane Under Two Kinds of Electric Boundary Conditions ＊

The solutions for a mode Ⅲ crack growing along an arbitrary propagation path in a piezoelectric plane are studied under the impermeable surface condition and the electrical contact surface condition respectively. According to the two kinds of electric boundary conditions, the Hilbert and Riemann boundary value problems in a half-plane including opening smooth arc are obtained from the theoretical analysis. Moreover, the equipollence of the solution formed under these two electric boundaries is proved, and unified solutions for the stress and electric displacement distribution in the crack-tipfield of the piezoelectric plane are achieved.     

测试温度对nc-Si∶H膜光致发光特性的影响

利用常规等离子体化学气相沉积（ＰＥＣＶＤ）工艺制备了ｎｃ－Ｓｉ∶Ｈ膜，并对其光致发光（ＰＬ）特性从１０～２５０Ｋ温度范围内进行了变温测量．实验结果指出，随着测试温度升高，ＰＬ峰值能量发生了５４ｍｅＶ的红移，ＰＬ强度在Ｔ＞８０Ｋ后呈指数下降趋势．ＰＬ峰值能量的红移起因于带隙的收缩，而ＰＬ强度的减弱则是由于非辐射复合起了主导作用．     

电沉积富铁Fe-Ni合金箔工艺的研究

对硫酸盐-氯化物电解液中电沉积富铁Fe-Ni合金箔的工艺进行了研究,讨论了电解液组成、电流密度、温度及pH值等因素与合金箔组成之间的相互关系,得到了制备富铁合金箔的最佳镀液组成及工艺条件,并通过实验确定在阴阳极比为1:2时,镍铁联合阳极配比为1.5:1.通过扫描电镜,能谱和X-衍射对富铁Fe-Ni合金箔的形貌及结构进行分析表明合金箔晶粒细致,尺寸均匀,结构紧密,表面光滑平整,无孔洞和裂纹,晶粒结构为(111),(200),(311)及(222)织构,并表现为较强的(111)择优取向.