High-contrast imaging for weakly diffracting specimens in coherent diffraction imaging

Coherent diffraction imaging (CDI) and ptychography techniques bypass the difficulty of having high-quality optics in X-ray microscopy by using a numerical reconstruction of the image that is obtained by inverting the diffracted intensity recorded by a charge-coupled device array. However, the reconstruction of the image from the intensity data obtained from a weakly diffracting specimen is known to be difficult because of the obvious reduction in signal-to-noise ratio (SNR). In this case, the specimen only slightly modifies the probe diffraction pattern, resulting in difficulty in the identification of the detailed structure of the specimen from the reconstructed image because of the poor contrast and sharpness of the image. To address this situation, a modification in the image retrieval algorithms used in the iterative reconstruction of the image is suggested. This modification should double the presence of high spatial frequencies in the diffraction pattern to enhance the contrast and edge detection in existing imaging techniques.     

Investigation of Bessel beam propagation in scattering media with scalar diffraction method

Bessel beam propagation in scattering media is simulated using the angular spectrum method combined with slice-by-slice propagation model. Generating Bessel beams with a spatial light modulator, which provides a means to adjust flexibly the parameters of the Bessel beam, allows us to validate the simulation results experimentally. The study reveals that the self-reconstructing length changes oppositely with the axicon angle （i.e., the larger the axieon angle, the shorter the self-reconstructing length）. The radius of the incident beam has little influence on the self-reconstruction of the Bessel beam central lobe.     

Influences of high-temperature annealing on atomic layer deposited Al2 O3/4H-SiC

High-temperature annealing of the atomic layer deposition (ALD) of Al2O3 films on 4H-SiC in O 2 atmosphere is studied with temperature ranging from 800℃ to 1000℃. It is observed that the surface morphology of Al2O3 films annealed at 800℃ and 900℃ is pretty good, while the surface of the sample annealed at 1000℃ becomes bumpy. Grazing incidence X-ray diffraction (GIXRD) measurements demonstrate that the as-grown films are amorphous and begin to crystallize at 900℃. Furthermore, C-V measurements exhibit improved interface characterization after annealing, especially for samples annealed at 900℃ and 1000℃. It is indicated that high-temperature annealing in O2 atmosphere can improve the interface of Al2O3 /SiC and annealing at 900℃ would be an optimum condition for surface morphology, dielectric quality, and interface states.     

主从竞争供应链博弈分析

考虑两条均由一个制造商和一个零售商组成的竞争供应链模型,链间采用Stackelberg博弈,而链内分别考虑制造商主导和零售商主导两种情况.考察了在链内企业实力不同时对供应链之间的竞争有何影响.分析了当企业实力发生改变时,对己链以及他链成员的最优决策有何影响.最后对反映供应链竞争程度的(?)_i做灵敏度分析.结果表明任何供应链内部主导权的改变对链与链之间的竞争没有影响.链内企业之间的博弈只是一种内耗.当两条链实力旗鼓相当时,后进入市场的供应链具有"后动优势"以及竞争加剧对各方都有利.     

具有拟H(o)lder连续生成元的倒向随机微分方程的可积解

本文证明了具有可积参数的一维倒向随机微分方程解的一个新的存在唯一性结果,其中生成元g关于y满足Osgood条件且关于z是拟H(o)lder连续的(这里可以不是H(o)lder连续的).利用Tanaka公式及Girsanov变换建立BSDE的L1解的一个比较定理,从而得到解的唯一性.利用单调逼近方法给出生成元g的一个一致逼近序列进而构造出BSDE的L1解的一个序列,然后证明其极限即为所需的解,从而证明解的存在性.     

功能材料在蛋白质组研究中的应用进展

随着对蛋白质组鉴定深度、定量准确性及分析速度越来越高的要求,对蛋白质组学方法的研发提出了新的挑战。为了应对这些挑战,传统的蛋白质组学方法因其灵敏度低、准确性差以及耗时长等不足已经难以满足蛋白质组学研究领域不断提出的新需求。而将通过光、电、磁、热、化学、生化等作用合成具有特定功能的材料用于蛋白质组的研究,可以克服传统蛋白质组学分析技术的局限性,为蛋白质组学研究起到促进作用。该文对功能材料在蛋白质组研究中应用的新进展进行综述。     

碳团簇的结构及其演进

碳团簇是一种新型的碳材料,自20世纪80年代被发现以来,就以其独特的结构和优越的性能而在科学界掀起了研究狂潮。碳团簇的范畴非常广泛,小到气相中的单个碳原子,大到富勒烯、碳纳米管、碳纳米锥、石墨烯等都可以看作是碳团簇的存在形式。研究碳团簇的结构及其演进,解开碳团簇形成机理之谜,对开拓新型碳团簇材料的结构和应用都具有重要意义。本文对碳团簇的结构及其演进过程进行了回顾,并概述了目前碳团簇的合成方法、碳团簇结构的表征手段以及碳团簇演进的研究现状。     

一种高性能太阳敏感器复合光学系统设计

以夫朗禾费衍射理论为基础,结合微透镜,设计了一种高性能的数字式太阳敏感器复合光学系统。分析了光学系统的组成,建立了光学系统的数学模型,设计了光学系统的焦距、孔径和微透镜参量,并进行了成像的数值仿真。仿真结果表明,与基于掩模的光学系统相比,这种新型的复合光学系统成像光斑能量分布集中,保证计算光斑中心位置的高精度,使敏感器具有大视场和高精度的特点。     

光衍射数值模拟中不同抽样方法的适用性分析

基于标量衍射理论和快速傅里叶变换,分析了光衍射的数值模拟时可以采用的不同抽样方法及其适用性。理论分析表明,按照抽样对象的不同,存在三种适用范围不同的算法:传递函数抽样法、点扩展函数抽样法和加权函数抽样法。其适用范围分别为衍射距离小于、大于和等于特征距离的情况。在Matlab软件环境下给出了三种算法的模拟计算实例,并与相应的实验结果进行了比较,证明了理论分析的正确性。最后还给出了一种无需改变抽样点数和抽样间隔就可计算任意距离衍射过程的自适应抽样算法及其在数字全息再现中的应用实例。