含氧光敏引发体系的研究——Ⅵ.二苯酮/三乙胺体系引发光聚合过程中的再次引发效应

过去,作者曾发表了多种光敏引发体系引发烯类单体光聚合的工作,在研究2,2-二甲氧基苯乙酮在氧存在下引发甲基丙烯酸甲酯光聚合时,结合在聚合物链端的引发剂碎片具有光化学活性,在光聚合反应中产生高分子自由基,发生再次聚合,出现高分子量     

GC/MS法分析奶油中的脂肪酸

利用气相色谱/质谱/计算机联用技术分析人造奶油、天然奶油和新西兰奶油中的脂肪酸,从中鉴定出7种酸:棕榈酸、棕榈油酸、硬脂酸、油酸、亚油酸、亚麻油酸及花生酸。人造奶油含亚油酸比天然奶油含的高。     

现代仪器分析在生物矿化研究中的应用

现代仪器分析技术在天然生物复合材料研究中具有十分重要的地位.人们对生物矿化的了解,从简单的有机/无机相间的叠层结构到复杂的多级构造、从晶粒的有序排列到特定的晶面取向、从定性描述可溶性有机基质(SM)和不可溶性有机框架(IM)到基质氨基酸分子的组分和蛋白质序列片段的解析、从有机/无机界面天然有机模板对无机结构的指导作用到人工组装的有机模板对诱导产物进行调控,尤其进入到分子水平,无不借助于分析测试技术的进步.     

CuO/Al2O3催化剂高温固相反应的原位XRD和Raman研究

采用原位XRD和激光Raman光谱等技术对CuO/Al2O3系列催化剂高温下的表面组成和体相结构的变化进行研究.结果表明,随着焙烧温度升高,CuO首先与载体Al2O3发生固相反应生成CuAl2O4.CuAl2O4层能阻止外层CuO进一步向载体Al2O3扩散,从而使部分CuO稳定在CuO/Al2O3催化剂的表层.     

人尿中诺龙和炔诺酮代谢物的气相色谱-质谱分析

本文对合成的19-去甲雄烷醇酮的四个差向异构体混合物进行气相色谱分离,对诺龙和炔诺酮用药后,留取的人尿样通过化学预处理,MSTFA/TMSI衍生化反应,GC/MS分析,确证了尿样中诺龙的两个主要代谢产物为19-去甲雄酮和19-去甲原胆烷醇酮,炔诺酮的两个主要代谢物是四氢炔诺酮(THINE)的两个形式,可能是3α-OH-5α-THINE和3α-OH-5β-THINE,在炔诺酮代谢前期,还发现有诺龙的上述两个代谢物存在。     

Studies on Electrochemical Property of LiFePO4/C as Cathode Material for Lithium Ion Batteries

IntroductionLithium ion batteries are key components of mobiletelephones and portable computers.Among the knownLi-intercalation materials for lithium ion battery cath-odes,LiCoO2,LiNiO2,and LiMn2O4have been stud-ied extensively[1—3].LiCoO2is nowused in c…     

界面分级离子/配位子交换-静电交换的复合模型——离子强度对海水中微量金属-固体粒子相互作用的影响

在实验上首次发现,粘土矿物为固体粒子的体系的E％-pH曲线之离子强度效应是“先右后左摆动现象”;而水合氧化物为固体粒子的体系则是“向左单向移动现象”。对应的等温线之离子强度效应则是“先下后上摆动”和“单向上移”现象,两类四现象一致。为解释上述诸现象,提出液-固界面分级离子/配位子交换-静电交换的复合模型作统一解释和定量处理。由粘土矿物和水合氧化物两类物质的结构可知,前者可发生两类交换作用,彼此消长时曲线位置产生双向摆动;后者只有界面分级离子/配位子交换,故曲线位置单向移动。模型计算结果与实验吻合。     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.