沉淀法合成纳米晶长余辉材料Y2O2S∶Eu3+，Ti

The long-lasting phosphorescent materials, yttrium oxysulfides doped by Eu and Ti, were systhesized by coprecipitation with their subsequent thermal decomposition in the presence of sulphur. The products were characterized by XRD, TEM, phosphorescent spectra, and thermoluminescence. The XRD results indicate that the lowest synthesis temperature is 700 ℃. From the TEM, the average diameter of particles was in the range of 60～120 nm, and augmented with the increase of temperature. The materials under UV excitation presented well afterglow from the transition of ⁵D_0,1 → ⁷F_J of Eu³⁺, and the persistent time was about 2 h. The long-lasting afterglow mechanism was discussed, too.     

稀土-镍-茜素配位剂极谱异核配合吸附波的研究

本文报道了稀土-镍-茜素配位剂体系异核配合物的极谱配合吸附波的形成条件及其机理的研究.此外还将其应用于发光材料中铕的测定。     

六次甲基四胺与酚类化合物包结现象的研究

Bishop开发的主体化合物1,6-二甲基-1,6-二羟基二环[3,3,1]壬烷可与乙酸乙酯等形成包结物~[1,2],柏木醇通过氢键作用可与酚类化合物形成包结物~[3].比较上述两个主体分子的结构可知,其相似之处在于它们都是桥环化合物,且具有近似球状的分子结构.考虑到六次甲基四胺也是一个球状桥环化合物,且具有与客体分子形成氢键的条件,故它与酚类化合物的包结现象也有助于氢键共晶现象的研究~[4].     

用两种方法合成长余辉发光玻璃的对比研究

在还原性气氛下高温固相反应法（一步法）合成了长余辉发光玻璃GA；用SrAl2O4:Eu,Dy荧光粉（SAED）与玻璃粉混合高温熔融（二步法）合成了长余辉发光玻璃GB和GC，通过XRD，发光光谱和磷光衰减曲线对样品进行了表征，荧光粉SAED和玻璃GA，GB，GC的发射峰值依次是525，493。462，516nm，发光强度和余辉时间都是SAED＞GC＞GB＞GA，玻璃的发射光谱峰随玻璃组成不同发生位移，两种发生合成的夜光玻璃发光性质存在明显的差异，同一合成方法下，玻璃基料决定着玻璃网络结构，同时也影响着夜光玻璃的发光性质。     

La2CaB10O19∶Ce3+在VUV-Vis范围的发光性质研究

通过研究La2CaB10O19∶Ce3+在VUV-Vis范围的光谱, 发现Ce3+在La2CaB10O19中共有两种格位, 分别取代了十配位的La3+和八配位的Ca2+, 从而发射光谱中没有出现特征的双峰, 而出现了峰值约位于307, 330和356 nm的3个发射峰.由于在低对称性晶体场中d轨道的分裂, 激发光谱中位于194, 224, 243, 260, 274和318 nm的峰是由两个格位的Ce3+的f-d跃迁引起的.Ce3+占据两个格位, 可以通过以Eu3+为荧光探针的发射光谱中出现的两个5D0-7F0跃迁得到验证.峰值位于162 nm的激发谱带是基质吸收带, 与基质禁带宽度相对应.通过计算, 不排除其中包含O2-→Ce3+的电荷迁移带的可能性.     

微波辅助合成发光可调ZnS∶Cu纳米晶

以巯基丙酸(MPA)为稳定剂, 利用微波辐射加热方法制备了水溶性的Cu掺杂的ZnS纳米晶. 通过改变微波条件, 可以在460～572 nm之间实现对ZnS∶Cu纳米晶发射峰位的连续调控. 通过XRD、 UV-Vis、荧光及荧光衰减对ZnS∶Cu纳米晶的结构和发光性质进行了详细探索, 并利用时间分辨荧光光谱对其发光机理进行了初步研究.     

聚合膜薄膜电致发光器件

综述了聚合物薄膜电致发光器件的材料，结构，发光机理，研究现状和目前存在主要问题，同时对发展方向也进行了简单介绍。     

β-环糊精与两性表面活性剂相互作用

用表面张力法研究了β-环糊精与十一烷基酰胺甲酸钠(C₁₁H₂₃CONHCOONa,SF)两性表面活性剂在不同温度下的包结作用。结果表明:SF的表面张力值(β)及表观临界胶束浓度(cmc^*)加入β-CD后增加,β-CD浓度越大,γ和cmc^*增加越多,且SF的cmc^*与β-CD浓度存在线性关系,随温度的升高,两性表面活性剂的表面张力值降低,意味着它们的表面活性随温度升高而增强。利用表面张力测定了β-CD-SF体系在不同温度下的包结形成常数K_a,进而求得了包结过程的焓变和熵变,结果表明,该过程是焓和熵均有利的过程,进一步说明疏水作用是形成包结物最重要的的作用力之一。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.