逻辑控制系统中三种控制技术分析

本文分析常用的继电控制、可编程序控制器(PLC)和正在发展、兴起的在线可编程器件CPLD／FPGA的特点及在逻辑控制中特点及应用，为正确选择三种控制方法提供一定的参考。     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

Efficient Visible Electroluminescence from Porous Silicon Diodes Passivated by Carbon Films

By using n-butylamine as a carbon resource,carbon film is deposited on the p-n porous silicon (PS) surface with a radio-frequency glow discharge plasma system.Raman spectra and infrared reflection (IR) spectra of the carbon films indicate that there are amine-group and hydrogen atoms therein.The IR spectra of the passivated PS samples exhibit that the PS surfaces are mainly covered with Si-C,Si-N and Si-O bonds.Electroluminescence (EL) spectra show that the EL intensity of the passivated PS diodes increases greatly and the blueshift of the EL peak occurs compared with the diodes without treatment.Both of these are stable while the passivated diodes are exposed to the air indoors.The I-V characteristics reveal that the passivated diodes have a smaller series resistance and a lower onset voltage.The influence of the carbon film passivation on EL properties of PS has also been discussed.The results have proven that carbon film passivation is a good way to enhance the PS luminescent intensity and stability.     

Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

像增强器用中波红外辐射可激励的新型荧光材料

1 引言目前,许多研究都集中于研制各种用途的中波红外成像系统。这些应用从工业用热成像一直扩展到探测车辆、导弹等的军用热成像。可反映中波红外成像目前技术水平的是加工碲镉汞、锑化铟等半导体探测器的线阵或面阵,并把它们组装到一适当光学成像系统。但是,材料和器件的产额低,这种器件不仅制作难而且成本高。本文介绍一种加工成本低用于中波红外成像的新型探测介质,具体地讲,这种新介质是一种可将中波红外     

取样平均法提高CCD多道探讨器信噪比

应用取样平均法有效地提高了ＣＣＤ光学多道探测器信噪比，当采样次数为ｍ时，信噪比提高√ｍ倍，应用于实验得到了高信噪比的各种光谱谱图。     

高温超导微波器件在移动通信中的应用

高温超导微波器件在移动通信基站的应用,蕴涵了巨大商机.由高温超导滤波器、低噪声前置放大器以及微型制冷机组成的高温超导移动通信基站接收机前端子系统,将给移动通信基站的性能带来极大的提高.目前,全球已出现一批专业化商业公司.美国已有近2000套高温超导子系统产品在基站做商业运行;欧洲和日本也已完成样机研制.中国科学院物理研究所在2001年初完成了我国第一台高温超导移动通信基站原理性样机.     

某些查耳酮化合物的发光

本文叙述了两个同质查耳酮系列的合成.一个带有查耳酮中心链(系列Ⅰ),另一个是系列Ⅰ的酯类(系列Ⅱ).研究了每个系列中三种化合物的发光,发现两个系列的所有化合物都能见到发光.系列Ⅰ中的化合物在峰值为360nm处可见到发光,而系Ⅱ列中的化合物未能观测到这一波长的发光.然而,在峰值为470nm处两者均可见到发光.得出的结论是,消除非键电子微扰作用的氢键是系列Ⅰ中的化合物在360nm处出现发光的原因.