单分散磁性纳米颗粒的制备及生物高分子在其上的组装

磁性纳米颗粒因其潜在的生物医学应用价值而成为纳米生物材料领域研究的前沿。本文综述了单分散磁性纳米颗粒的制备方法以及生物高分子在磁性纳米颗粒上的组装的研究进展。     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

LaNi4.7Al0.3单颗粒微电极电化学行为的研究

报道了一种单颗粒微电极制备新方法, 并研究了LaNi4.7Al0.3球形单颗粒微电极的电化学行为.     

铋(Ⅲ)-桑色素极谱络合吸附波的研究

在0.25 mol/L HCl底液中,用单扫极谱法得到了灵敏的铋(Ⅱ)-桑色素络合吸附波,其检测下限达5.0×10~(-9)mol/L。用其测定了锰盐中的痕量铋。测得电活性络合物组成为:铋(Ⅱ):桑色素=1:1,条件稳定常数1gμ=5.0。电极反应为吸附络合物中Bi(Ⅱ)还原为Bi(Hg)。测得电极反应转移系数α=0.42,表面电化学反应的标准速率常数k_s=12.7s~(-1)。     

利用LB技术以寡聚DNA为模板构建CdS纳米结构

利用Langmuir-Blodgett技术制备了十八胺（ODA）／十聚腺嘌呤（oligo-A10)单分子膜，并以其为模板制备了不同形状的Cds纳米结构，结果表明以在低膜压下转移的寡聚DNA单层为模板可诱导生成线形的Cds纳米结构，而以在主膜压下转换的寡聚DNA单层膜板得到的是Cds的球形结构聚集体。     

CuO/γ-Al2O3单分散催化剂的XAFS研究

采用XAFS方法研究浸渍法制备并于低温焙烧的CuO/γ-Al2O3催化剂的局域结构.对于CuO负载量小于单层分散阈值的CuO/γ-Al2O3(0.4 mmol/100 m2),结果表明,CuO物种是以层状分散的孤立原子簇存在于γ-Al2O3载体表面,其第一近邻Cu－O配位环境的结构与晶态CuO的相似,键长和配位数分别为0.195 nm和4.对于CuO负载量等于单层分散阈值的CuO/γ-Al2O3(0.8 mmol/100 m2),已有少量的CuO纳米颗粒生成.对于CuO负载量大于单层分散阈值的CuO/γ-Al2O3(1.2 mmol/100 m2),其结构与多晶CuO的相近.基于CuO在γ-Al2O3载体上的三种不同分散状态的结构特点,我们提出了CuO/γ-Al2O3催化剂的结构模型.     

单氨基取代3∶1不对称酞菁锌的合成及其在有机溶剂中聚集状态的研究

Monoamino substituted asymmetrical phthalocyanine zinc(Ⅱ), 2-amino-9,10,16,17,23,24-hexapentyloxy phthalocyanine zinc(Ⅱ), was synthesized by statistical condensation and characterized by elemental analysis, UV-Vis, IR and TOF-MS. The aggregative behavior was studied in DMF, THF and CH₂Cl₂. The results show that it is not aggregateve in DMF and THF, whereas form dimer in CH₂Cl₂ at 8 × 10^-7～8 × 10^-6 mol·L^-1. The equilibrium constant for the dimer was calculated at the same time, indicating that the less polar solvent is unfavorable for the presence of the monomer.     

薄膜荧光传感器研究进展

按薄膜荧光传感器的制备方法, 从物理薄膜、化学薄膜和自组装单层膜等三个方面综述了近年来薄膜荧光传感器的研究进展. 在此基础上, 展望了薄膜荧光传感器的研究前景.     

CaBPO5：RE（RE=Eu，Tb）的水热合成及其发光特性

利用水热法合成了CaBPO5：RE(RE=Eu，Tb)荧光体并测试了其结构和光谱，讨论了其发光性质，并与高温固相法合成的产物作了对比．结果表明，由于电子转移。Eu^3 ,Tb^3 和Eu^2 共存于同一体系中，而且Eu^2 的发射位置从402nm移至428nm,在双掺杂体系中引入Ce^3 ．Eu^3 ，Tb^3 和Eu^2 的发光强度均有所增强,这可能是Ce^3 与Eu^3 之间的电子转移及各种稀土离子之间能量传递相互竞争的结果。     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.