介质膜滤波器色散特性的研究

采用信号处理的方法,对介质膜滤波器的滤波特性进行了详细的研究。介质膜滤波器是最小相位滤波器,它的幅度响应与相位响应之间存在希尔伯特变换规律,因此可以通过它的幅度响应重构它的相位响应,进而可以得到它的色散特性。为了验证理论分析,设计了射频调制法测试介质膜滤波器群速度延时的实验装置。实验测试了一个100GHz33信道的介质膜滤波器的群速度延迟。通过对实验结果与理论计算结果的对比分析,发现实验数据与理论分析吻合得比较好。最后,对介质膜滤波器的色散的特点进行了分析。     

波导侧壁起伏对聚酰亚胺波导光学梳状滤波器串扰特性的影响及其改善方法

提出了一种结构模型来分析由工艺引起的波导侧壁起伏对于聚合物波导光学梳状滤波器的滤波特性的影响。含氟聚酰亚胺高分子聚合物制备多级马赫一曾德尔串联型光学梳状滤波器件的工作参量为中心波长1550nm,波长间隔为0．8nm,40通道的波长交错分离。模拟计算：表明,对由高分子聚合物材料制备的多级马赫-曾德尔串联型光学梳状滤波器件,其主要影响是增大了信道之间的串扰,中心波长1550nm处的信道串扰由理想情况下的-40dB降为-12dB,极大地影响了器件的性能。在此基础上,提出一种改善光学梳状滤波器串扰性能的新结构,该结构由多级马赫-曾德尔耦合器和微环共振滤波器串接构成,40个通道的串扰改善为-0dB以下。     

Cubature Kalman filters: Derivation and extension

This paper focuses on the cubature Kalman filters （CKFs） for the nonlinear dynamic systems with additive process and measurement noise. As is well known, the heart of the CKF is the third-degree spherical–radial cubature rule which makes it possible to compute the integrals encountered in nonlinear filtering problems. However, the rule not only requires computing the integration over an n-dimensional spherical region, but also combines the spherical cubature rule with the radial rule, thereby making it difficult to construct higher-degree CKFs. Moreover, the cubature formula used to construct the CKF has some drawbacks in computation. To address these issues, we present a more general class of the CKFs, which completely abandons the spherical–radial cubature rule. It can be shown that the conventional CKF is a special case of the proposed algorithm. The paper also includes a fifth-degree extension of the CKF. Two target tracking problems are used to verify the proposed algorithm. The results of both experiments demonstrate that the higher-degree CKF outperforms the conventional nonlinear filters in terms of accuracy.     

基于特征点匹配的电子稳像技术

为获得高质量视频输出序列,电子稳像技术常被用来去除成像设备所摄取的图像序列中的随机抖动。本文首先介绍了电子稳像的国内外发展现状。然后,从电子稳像技术中的运动估计模块出发,描述了国内外近年来出现的直接求取运动估计算法以及各种基于特征点匹配的运动估计方法,并对运动校正和运动补偿模块的算法进行了评述。最后综合分析了稳像算法的难点以及未来发展趋势,提出基于特征匹配的电子稳像技术的发展方向。     

关于提高傅里叶变换轮廓术测量精度的研究

针对傅里叶变换轮廓术在实际测量中容易受到光学成像系统和计算方法的影响而使得测量结果不精确的现象,提出基于最小二乘法的条纹图像预处理技术,并讨论了滤波器的设计、相位展开的方法及系统标定模型对测量结果的影响。实验表明,改进后的方法其测量误差在2%以内。     

Research on lenses assemble precision in complicate laser amplification system

In a certain amplification system, signal laser can be amplified from 1 nJ to 5 J. To realize a high quality imaging transfer, meet beam diameter expansion requirement, and get good filtering effects, three spatial filters are designed and assembled. Lenses in these spatial filters can be assembled and adjusted by their reflection spots to meet wave-front requirements. In this letter, we analyze precision of the assembling, and make a ray-tracing simulation to discuss the relation between assembling precision and lenses parameters. On the optimized distance of 1000 mm, adjusting precision of lens tilt can reach 5 mrad.     

SOI多环级联光学谐振腔滤波器

利用MEMS工艺制备了基于SOI的小尺寸、高集成光波导多环级联谐振腔滤波器,理论分析了多环级联微环腔的光场传输特性与光谱响应特性,实验验证并得到了不同级联环数与谐振谱线滚降垂直度的关系。研究表明:当波导宽度为450 nm、半径为5μm时,单环、双环和十环滤波器响应谱线的-3 dB带宽分别为0.313,0.279,0.239 nm,相应结果与理论吻合,即随着级联环数的增多,谐振谱线顶端趋于平坦,滚降垂直度增高。设计制备了环形与跑道形两种级联谐振腔滤波器,研究了相应的透射谱特性。     

Auditory filter based broadband MUSIC algorithm for sound source localization

Based on the analysis of the shortcomings of broadband MUSIC algorithm with short-time Fourier transform （SF-MUSIC） for sound source localization, a broadband MUSIC algorithm with auditory filter （AF-MUSIC） was proposed. The proposed algorithm first em- ploys auditory filter bank to decompose the signals received on the microphone array, and then locates the sound source with MUSIC algorithm over every frequency channel. At last, by combining with the subinterval frequency estimation, the final localization result is gained. Evaluations on the proposed algorithm prove that comparing with the SF-MUSIC algorithm, the AF-MUSIC algorithm decreases the average error of the estimation results with 2.5479 de- gree in different source conditions. The accuracy of sound source DOA estimation is enhanced effectively.     

Theoretical analysis of the performance of a single side band multicarrier source based on a re-circulating frequency shifter influenced by an optical bandpass filter

An optical bandpass filter （OBF） is an important element whose properties considerably influence the output performance of a single side band multicarrier source based on a re-circulating frequency shifter. The influence of the OBF in the loop on the output spectrum is theoretically analyzed. Numerical simulations and experiments are Mso carried out. Results show that the steepness and deepness of a nonflat-top filter influence the stability of the spectrum of an output multicarrier. To obtain multicarrier output with tone to noise ratio （TNR） 〉26 dB and error vector magnitude （EVM） 〈0.25, the steepness ratio of the filter should be greater than 0.75 and deepness should be larger than 0.99.     

Design and preparation of LWIR narrow-band filter with wide rejection band

In this letter, using mult-half-wave structure and some chosen films optimized method, the long-wave infrared （LWIR） narrow-band pass filter is investigated, meanwhile the opposite of the substrate coated with long-wavelength pass film. The transmittance of design spectrum is more than 80% at wavelength region of 8.05 8.35 μm, and the average transmittance is less than 0.5% at wavelength region of less than 7.95 and 8.45 14 pro. The filter is prepared by thermal evaporation method, and plasma-assisted deposition technology. The experiment result shows that the average transmittance is about 75% in the transmission wavelength range, and the average transmittance of cut-off band is about 0.3%. The results show that multi-half-wave structure and some chosen films optimized method for the preparation LWIR narrow-band pass filter are feasible. The film system is simplified and is convenient to prepare the film.