NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

元素化学教学方法探究

在元素化学教学中,通过密切联系实际、拉近化学与生活的距离、化学史的穿插以及环保意识的渗透等手段激发学生的学习兴趣;利用多媒体技术和网络学堂等现代手段,以求达到良好的教学效果。     

CROSS-LINKING OF AROMATIC POLY（THIOETHER）S

A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.     

Naphthalimide as Highly Selective Fluorescent Sensor for Ag^＋ Ions

The naphthalimide derivative. NA1 was synthesized, which consists of a bis（2-（ethylthio）ethyl）amine group binding cations and naphthalimide unit as chromogenic and fluorogenic signaling subunit. Absorption and emission spectra and the effect of polarity of solvents and pH values were studied. The photo-induced electron transfer （PET） occurred from the donor of bis（2-（ethylthio）ethyl）amine group to the naphthalimide fluorophore. The present study demonstrates that NA1 is a viable candidate as a fluorescent receptor for a new Ag^＋ ion sensor. This silver ion chemosensor can discriminate Ag^＋ ion well among heavy metal ions by an enhancement of the fluorescence intensity in ethanol-water （1 ： 9, V ： V）. And NA1 is also a pH-sensor because the fluorescence of the compound varies with the pH values.     

化学溶液分解法制备(Bi0.9Nd0.1)2Ti2O7薄膜

采用化学溶液分解法（CSD）在p—Si（111）衬底上制备了（Bi0.9Nd0.1）2Ti2o7薄膜。用X射线衍射技术分析了薄膜的结构和结晶性，结果显示，在600℃退火10min得到了结晶性较好、表面致密的多晶薄膜；用原子力显微镜描述了薄膜的表面形貌，与在XRD中观察到的择优取向是一致的；同时还研究了薄膜的电学性能。结果表明，在0～6V范围内，薄膜的漏电流小于1．53×10^10A；在室温100kHz下，其介电常数为166，介电损耗因子为0．227，显示出薄膜具有较好的绝缘性和介电性能。     

聚苯胺复合导电薄膜的制备及性能

聚苯胺;现场化学氧化聚合;掺杂;可溶性;导电性     

纳米铂直接修饰玻碳电极的制备及在半胱氨酸中的电化学行为

采用一步化学原位还原法将球形纳米铂颗粒直接修饰在玻碳电极上,用SEM、EDS和电化学方法对该电极进行表征并与铂片电极、裸玻碳电极进行了对比。结果表明,纳米铂修饰电极的峰电流与扫描速度呈线性关系,纳米铂在电极表面覆盖率为1.28×10-7mol/cm2。循环伏安法研究结果表明纳米铂修饰电极对半胱氨酸的催化氧化作用和铂片电极相比提高了数倍,且峰电位负移了0.3V。在纳米铂修饰的玻碳电极上,半胱氨酸的浓度在1.0×10-7mol/L到1.0×10-5mol/L范围内和催化电流呈线性关系。     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

气相色谱-负化学离子源质谱法检测食品中苯醚甲环唑的残留量

建立了一种用于各种食品中苯醚甲环唑残留量的气相色谱-负化学离子源质谱(GC-MS/NCI)检测方法。用乙酸乙酯对各类样品中的苯醚甲环唑进行提取,固相萃取(SPE)净化后由GC-MS/NCI在选择离子监测模式下进行测定。方法的准确度和精密度高,多数样品在0.01,0.04,0.10 mg/kg三个添加水平下苯醚甲环唑的回收率处于70%和120%之间,相对标准偏差（RSD）不大于9.5%。方法在0.02～1.00 mg/L范围内有良好的线性关系,且灵敏度高,最低检测限达到0.0005 mg/kg;选择性好,抗干扰能力强,能消除复杂基质带来的干扰,适合各种食品中苯醚甲环唑残留量的确证分析。     

化妆品中氯霉素的气相色谱-质谱快速分析

研究了用气相色谱-质谱分析化妆品中氯霉素(CAP)的方法.以乙酸乙酯作为提取溶剂,BSTFA TMCS(99 1)作为衍生化试剂,在70℃衍生化60min,用GC-MS(NCI)进行测定.方法的检出限为10 μg/kg,线性范围在0.5～500 ng/mL之间,在10、100、500 μg/kg 3个添加水平,方法回收率为94.4%～95.7%,相对标准偏差为0.23%～1.3%.方法操作快速简单,3 h可以完成整个样品分析.方法已用于化妆品中氯霉素的测定.