氯分子束与钛表面激光化学反应动力学

本文采用飞行时间质谱技术测定了在紫外(355nm), 可见(560nm)和近代红外(1064nm)脉冲激光作用下, 氯分子束与Ti表面反应产物的质量分布和速度分布。所得结果表明, 不同波长激光诱导反应的主要产物相同, 有Ti, TiCl, TiCl3和TiCl4。在高能量密度的紫外激光作用下, 首次测得具有很高动能的原生Ti+。各种含Ti氯化物的飞行时间谱, 能满意地用单组分或多组分Maxwell-Boltzmann公式拟合和分析。上述激光诱导气-固表面反应的机理主要由氯分子在Ti表面上的解离吸附,吸附态氯原子在表面上生成TiClx(X=1～4)的连串反应以及激光诱导脱附所组成。近红外激光主要引起热脱附, 而紫外激光的作用还原可能有非热脱附过程。     

具有三维交叉孔道的新型亚磷酸锌的合成与结构

本文报道了一种新型三维亚磷酸锌[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄]的合成和晶体结构。在它的结构中，ZnO₄和HPO₃严格按照顶点连接的方式交替相连。骨架结构存在两个沿着不同方向无限延伸的由ZnO₄和HPO₃组成的四元环链，在[0 1 0]、[0 4 15]和[0 -4 15]三个方向形成了三个交叉8元环孔道，有机胺阳离子起着平衡电荷和稳定骨架的结构。它的晶体数据为：[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄],M=640.21, 正交晶系, Fdd2空间群, a=2.8528, b=0.8426, c=1.6159nm, Z=8, V=3.884nm³, R₁=0.0219, wR₂=0.0544。     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

中国科学院院士梁树权先生逝世

中国科学院院士、中国科学院化学研究所研究员、著名分析化学家梁树权先生，因病医治无效，于2006年12月9日在北京逝世，享年94岁。     

Imidazole Coordinated Sandwich-type Antimony Polyoxotungstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ）

The imidazole covalently coordinated sandwich-type heteropolymngstates Na9[ {Na（H=O2}3{M（C3H4N2）}3（ Sb W9O33）2]·xH=O（M=Ni^Ⅱ, Co^Ⅱ, Zn^Ⅱ, Mn^Ⅱ） were obtained by the reaction of Na2WO4·2H2O, SbCl3·6H2O, NiCl2·6H2O [MnSO4·H2O, Co（NO3）2·6H2O, ZnSO4·7H2O] and imidazole at pH≈7.5. The structure of Na9[{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2]·32H2O was determined by single crystal X-ray diffraction. Polyanion [{Na（H2O）2}3{Ni（C3H4N2）}3（SbW9O33）2}3]^9- has approximate C3v symmetry, imidazole coordinated six-nuclear duster [{Na（H2O）2}3{Ni（C3H4N2）}3]^9＋ is encapsulated between two （α-SbW9O33）^9-, the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals （Na-Ni-Na-Ni-Na-Ni） in the central belt, and x-stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60%. The compounds were also characterized by IR, UV-Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.     

介绍一个实用的化学软件——Chem Window

简要介绍实用化学专业绘图软件ＣｈｅｍＷｉｎｄｏｗ的特点与功能，及作者在使用该软件过程中的一些经验和技巧。