NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

An Efficient Deselenenylation Reaction to the Synthesis of 3, 5-Disubstituted Isoxazoline and Isoxazole

The development of organoselenium chemistry1 has been expanding rapidly during the last decades. Among them, organic selenides are key intermediates, for that they can be efficiently introduced, manipulated, and removed through selenoxide syn-elimination2. Our research group3 has been interested in the application of selenium in organic synthesis for several years. Isoxazolinyl substituted phenyl selenide 13a, although a β-H exists in the molecule, did not undergo selenoxide syn-elimination e…     

溶致变色法测定类杂芪染料分子-阶超极化率

Using solvatochromic method the determination of the molecular first-order hyperpolarizabilities of three novel stilbazolium-like dyes and twoknown stilbazolium-like dyes: trans-(pyrrol-2yl) -4-(N-methyl-pyridinio) -stilbazolium iodide(PPSI), trans-(furan-2-yl) -4-(N-methyl - pyridinio)-stilbazolium iodide (FPSI), trans-(thiophene-2-yl) -4- (N-methyl-pyridinio)-stilbazolium iodide (TPSI) and trans-(N-methylpyrrol-2-yl) 4-(N-methyl-pyridinio)-stilbazolium iodide (MPPSI), trans(4-N, N-dimethylamino) -(4- N-methylpwidinio) -stilbazolium iodide(DAPSI) in 8 solvents is presented, and their molecular hyperpolarizabilities are as high as 10-26 -10-27 esu. We have proved that the molecular hyperpolarizabilities is in linear correlation with the electron excessivities of donors for PPSI,FPSI and TPSI in each solvent, this relation give us a way to design molecules that have larger hyperpolallzabilities. Furthermore, our experiments show that the molecules of the five stilbazolium-like dyes have...更多 a larger dipolemoment, when they are in ground state than in excited state.     

肽类药物口服剂型材料及控制释放性能研究──Ⅱ.含有添加剂的壳聚糖-海藻酸盐微囊对胰岛素的控释作用

应用壳聚糖－海藻酸盐微囊技术制备了一系列含有添加剂的胰岛素微囊,并研究了在添力。剂存在下,不同反应条件对微囊的胰岛素包封率及其释放性能的影响．结果表明,在添加剂存在下,海藻酸钠浓度越高,微囊在胃液中释放率越大,在模拟小肠液中释放速率越低,并且微球的韧性很强,不易破裂;海藻酸钠与添加剂的质量比越大,微囊的包封率越大,胃液中释放率减小;胰岛素含量越高,包封率越小,胃液中释放率越大;明胶和牛血清白蛋白的加入使微囊在胃液中释放率显著增大,微球的强度和韧性大大增强,尤其明胶的加入使微囊在模拟小肠液中释放率显著降低,释放达到最大值的时间延长．     

苯乙烯基噻吩单体及对应的聚脲烷的合成 及其非线性光学性能

一种新型的反式-7-［4-N,N-二(β-羟基乙基胺基苯)］-3,5-二硝基乙烯基-噻吩（HBDT）单体分子及对应的预聚物和聚脲烷被合成和表征.由于噻吩环的电子去局域化能量低于苯环,在受授有机共轭化合物中噻吩环比苯环表现出更有效的共轭和更高的非线性,同时也能使目标分子保持好的光、热稳定性.该单体分子及其对应的聚脲烷在普通有机溶剂中具有良好的可溶性,聚脲烷膜具有好的热稳定性.制备了高质量的聚脲烷膜并进行了电晕极化.单体在甲醇中的紫外可见吸收峰（530nm）与对应未经电晕极化聚脲烷膜的吸收峰基本上没有改变.通过溶剂变色法及简并四波混频（DFWM）法测试了单体的二阶和三阶非线性极化率,其β     

一类肝靶向含钆大环磁共振对比剂的设计、制备与性能表征

肝靶向磁共振对比剂有助于肝细胞癌的早期诊断, 目前临床使用的线性对比剂存在导致病人肾源性系统性纤维化和钆离子沉积的风险. 本工作设计制备了一类含有乙氧芳基或甲氧苯基亲脂性基团、以DOTA-酰肼(DOTA: 1,4,7,10-tetraazacyclododecan-1,4,7,10-tetraacetic acid)为Gd³⁺离子螯合基团的大环类磁共振对比剂. 0.5 T磁场下测得其纵向弛豫率r₁值介于3.7~5.4 L•mmol^-1•s^-1, 优于临床使用对比剂Gd-DOTA, 弛豫率最高的为对比剂7h (Gd-DOTAH-EOPEI) (EOPEI: 1-(4-ethoxyphenyl)ethanimine), 略高于临床使用肝靶向对比剂Gd-EOB-DTPA (EOB: ethoxybenzyl; DTPA: diethylenetriaminepentaacetic acid), 比我们前期制得的肝靶向磁共振对比剂5d提高了约15%. 动物活体体内肝靶向磁共振成像研究显示, 所制备对比剂7b、7g和7h具有作为肝靶向磁共振对比剂的应用潜力. 结合弛豫率和活体体内成像数据, 筛选出了先导化合物7h.     

溴代及胺交联聚苯醚（PPO）膜的气体透过行为

对聚苯醚(PPO)进行了苯环溴代、甲基溴代以及胺交联,发现苯环溴代可提高O_2、N_2透过率(P),而选择性(α)基本不变。甲基溴代则相反,P降低、α有明显提高。调节两者比例可得到P、α兼优的O_2、N_2分离膜。甲基溴代后进一步胺交联可得到α更高、耐溶剂的膜材料。     

过渡金属体系非线性光学性质计算的ECP基组研究

有效核势(ECP)方法是计算含有过渡金属体系的电子结构及物理性质的有效方法. 本文比较了一系列典型的ECP基组对计算含过渡金属体系非线性光学性质精度的影响. 分别在HF, MP2和DFT理论水平上对过渡金属元素使用不同的ECP基组, 计算了几个过渡金属有机化合物的静态一阶超极化率β₀. 研究结果表明: 使用有效核势计算含过渡金属体系时, 核电子的选取是提高计算精度的前提, ns和np电子应该和nd电子一同作为价电子处理; 对于重原子, 必须考虑自旋-轨道耦合相对论效应. 经过综合评估, 认为使用Stuttgart/Dresden赝势的ECP基组, MHF, 在计算含有过渡金属体系非线性光学性质方面是比较好的基组; Stuttgart RSC 1997和SBKJC VDZ相对而言是较好的基组; 基组Lanl2dz, Hay-Wadt MB (n＋1)和Hay-Wadt VDZ (n＋1)由于没有考虑自旋-轨道耦合, 计算精确度次之; 而基组CRENBL和CRENBS计算的偏差要大一些, 尤其是CRENBS基组由于价电子选择得太少而导致与实验值的偏差最大.     

光催化降解染料ZnO催化剂的性能

光催化法是20世纪70年代发展起来的新型水处理技术，即以某些半导体材料为催化剂，利用光催化法来降解环境污染物。该方法工艺简单，成本较低，在常温下能使大多数不能或难于生物降解的有毒有机物彻底氧化分解。近年来研究最多的是TiO2，由于其带隙较宽(3．2eV)，只能吸收波长λ≤387nm的紫外光，因此研制新型光催化剂仍是重要课题。     

Diffusion of Acetic Acid Across Oil/Water Interface in Emulsification-Internal Gelation Process for Preparation of Alginate Gel Beads

Alginate has been widely used in cell microencapsulation and drug delivery systems in the form of gel beads or microcapsules.Although an alternative novel emulsification-internal gelation technology has been established and both the properties and the potential applications of the beads in drug delivery systems have been studied,the mechanism has not been well understood compared with the traditional droplet method(external gelation technology).On the basis of our previous knowledge that the novel technology is composed of complicatedly consecutive processes with multistep diffusion and reaction,and the diffusion of acetic acid across oil/water interface being the prerequisite that determines the occurrence and rate for the reactions and the structures and properties of final produced gel beads,a special emphasis was placed on the diffusion process.With the aid of diffusion modeling and simple experimental design,the diffusion rate constant and diffusion coefficient of acetic acid across oil/water interface were determined to be in the orders of magnitude of 10-6 and 10-16,respectively.This knowledge will be of particular importance in understanding and interpreting the formation,structure of the gel beads and the relationship between the structure and properties and guiding the preparation and quality control of the gel beads.