磁约束聚变的进展与球形环

自１９９１年１１月以来,从ＪＥＴ、ＴＦＴＲ和ＪＴ－６０Ｕ装置的氘－氚聚变系统运行中所获得的有价值的成果表明,现已有能力研究和设计ＩＴＥＲ和先进的托卡马克型聚变堆．ＩＴＥＲ分两个阶段的设计活动（ＣＤＡ、ＥＤＡ）可于１９９８年７月完成,其中包括安全分析及实验评估在内的聚变动力堆的设计全过程．但昂贵的建造费用已成为ＩＴＥＲ进一步开发的主要矛盾,一种改进型托卡马克——球形环有可能会解决这个问题,主要借助于最小尺寸和简化结构来降低费用．文中描述了动力、实验球形环和混合堆的特征与初步参数． Since Nov. 1991 JET, TFTR, JT 60U have contributed to valuable operating experience with D T reaction systems, and have validated abilities to design ITER. Two steps of ITER design (CDA, EDA) will be finished in July 1998. The whole design process of fusion power reactor has been considered in detail, including safety analysis and experimental valuations, but the high cost of construction becomes a main contradiction in futher developent. An advanced type of Tokamak spherical torus might...     

Z箍缩等离子体内爆实验金属丝阵负载优化设计分析

金属丝阵Z箍缩(Z-pinch)内爆是产生强x射线辐射的重要方法之一.在一定脉冲功率加速器条件下，金属丝阵质量和丝阵半径的选择决定了Z-pinch内爆等离子体辐射产额的大小.采用薄壳模型计算了不同丝阵质量、不同丝阵半径、不同粗细和不同材料金属丝构成的丝阵的内爆时间、内爆轨迹、内爆速度，以及最大动能和动能转换率，综合分析了丝间隙、内爆时间、动能转换率与丝阵质量和丝阵半径的关系，给出了在一定负载驱动电流条件下，金属丝阵的最佳参数.分析表明计算结果与实验上观察得到的内爆规律一致. 关键词： Z-pinch内爆等离子体 金属丝阵负载 薄壳模型     

Finite size specimens with cracks of icosahedral AI-Pd-Mn quasicrystals

Icosahedral quasicrystals are the most important and thermodynamically stable in all about 200 kinds of quasicrystals currently observed. Beyond the scope of classical elasticity, apart from a phonon displacement field, there is a phason displacement field in the elasticity of the quasicrystal, which induces an important effect on the mechanical properties of the material and makes an analytical solution difficult to obtain. In this paper, a finite element algorithm for the static elasticity of icosahedral quasicrystals is developed by transforming the elastic boundary value problem of the icosahedral quasicrystals into an equivalent variational problem. Analytical and numerical solutions for an icosahedral A1-Pd-Mn quasicrystal cuboid subjected to a uniaxial tension with different phonon-phason coupling parameters are given to verify the validity of the numerical approach. A comparison between the analytical and numerical solutions of the specimen demonstrates the accuracy and efficiency of the present algorithm. Finally, in order to reveal the fracture behavior of the icosahedral A1-Pd-Mn quasicrystal, a cracked specimen with a finite size of matter is investigated, both with and without phonon-phason coupling. Meanwhile, the geometry factors are calculated, including the stress intensity factor and the crack opening displacement for the finite-size specimen. Computational results reveal the importance of pbonon-phason coupling effect on the icosahedral A1-Pd-Mn quasicrystal. Furthermore, the finite element procedure can be used to solve more complicated boundary value problems.     

表面绝缘对平面钨丝阵Z箍缩早期过程的影响

在"强光一号"装置上研究了表面绝缘对平面钨丝阵早期过程的影响。通过对实验结果的唯象分析,发现相对于标准丝阵,表面绝缘丝阵X射线辐射被强烈延迟,并与丝阵宽度有较强的依赖关系,在X射线辐射之前存在较强的阴极发射;表面绝缘丝阵X射线辐射副脉冲幅值是标准丝阵两倍,且存在较长的平台期,其单丝等离子体膨胀导致的温度降低效应比标准丝阵强;在快速内爆开始之前,两者形成了类似的宏观磁流体不稳定性结构。     

新型大面阵彩色CCD航测相机光学系统设计

介绍了一种有别于传统彩色航测相机的新型大面阵彩色CCD航测相机设计方案,该相机光学系统由Dalsa公司最新生产的6K×8K大面阵彩色CCD作为接收器.通过理论计算和ZEMAX光学设计软件的优化,给出了工作波长适应范围为0.46～0.70μm、焦距为360mm、视场角为10°、相对孔径为1∶4.3的设计实例.设计结果表明...     

Ti-Zr-Ni单相准晶合金的室温力学性能研究

以Ti40₄₀Zr40₄₀Ni20₂₀合金为研究对象，用铜 模吸铸法制备出直径为3mm的致密单相准晶棒，通过维氏显微硬度测定和单向压缩实验方 法研究了该合金的室温力学性能 .结果表明：Ti40₄₀Zr40₄₀Ni20₂₀准晶具有良好 的弹性变形能力，室温弹性应 变可达125%.同时，它具有相对高的室温硬度（约55GPa），是普通Ti合金的15倍.T i40_{40 关键词： 准晶 Ti-Zr-Ni合金 解理断裂}     

Sea trial researches on the measurements of passive source space distribution imaging and positioning

The technology of source space distribution imaging measurement is a passive object positioning method with high precision in the near field, which also can get the distribution image of ship＇s radiated noise sources and locate the ghts of the target. The sea trials have been carried out, and the results validate the feasibility and practicability of this tech-nology. The researches indicate that the measurement precision can be achieved at the meter level within the range of 200 m using the uniform linear array which has the length of 45 m and 10 elements, and the method shows good robustness. The results also provide that the general ship can be simplified as single highlight model at 2-10 kHz in the near field and the catamaran is double highlights while its two propellers are working at the same time.     

针对平移和旋转的快速电子稳像方法

针对视频图像中存在的平移抖动和旋转抖动,提出了一种基于灰度投影和模板匹配的电子稳像方法。用网格法搜索图像中灰度特征明显的区域,结合分象限法提高系统的鲁棒性,在不同坐标系下分别投影,纠正平移和旋转偏差。给出了模板制作方法和配准步骤。实验证明,该方法具有较高的精度和很高的处理速度,能够实时去除由视频图像抖动引起的噪声。     

94 GHz回旋管准光模式变换器设计

基于几何光学理论和矢量绕射理论,研究了将回旋管及其他高功率微波器件的振荡输出模式转换成准光高斯波束的模式变换器,采用伏拉索夫(Vlasov)辐射器和三级准光反射面实现了准高斯模TEM₀₀的横向输出.研究了Vlasov辐射器的工作机理,运用矢量绕射理论计算出波导辐射场,口面电流分布的方法计算反射面辐射场.通过编写程序设计了将94 GHz,模式为TE₆₂的毫米波转化为准光高斯波束的内置式准光模式变换器. 关键词： 94 GHz回旋管 内置式准光模式变换器 Vlasov辐射器 矢量绕射理论     

用动态规划方法综合不等距线阵

动态规划方法是综合不等距阵的一个有效方法,但当阵元数比较多时计算量比较大。本文通过对阵元位置进行限制,避免过多的重复计算,使运算量大幅度减少。此外提出了重复迭代方法,可使旁瓣级进一步降低。