Residual stress profiling of an aluminum alloy by laser ultrasonics

A residual-stress profile along the thickness of an aluminum alloy sheet is determined by laser-ultrasonic technique. Surface acoustic waves are generated by a Nd:YAG pulse laser and detected by a Heterodyne interferometer on a lateral free surface of the sheet. The distribution of residual stress is determined by measuring the relative variation of the wavevelocities at different location of the sample along its thickness. This technique is validated by three different residual stress profiles obtained experimentally.     

核物理与等离子体物理——核物理与等离子体物理学科研究进展

编制了一个新的三维光路程序，可以计算任意方向的光线通过网络的轨迹，程序将更准确地模拟真实激光光束在柱型腔靶中的三维传播。设计了平板、球体、柱体等几何体计算模型，通过一系列的检验和考察，证明了程序计算的光路轨迹的可靠性。     

Fabrication of Long-Period Fibre Gratings Using 800 nm Femtosecond Laser Pulses

Long-period fibre gratings inside standard single-mode optical communication fibres are successfully fabricated with infrared femtosecond laser pulses. The refractive index perturbations are well confined within the fibre core by choosing the proper laser focusing parameters and translation speed of the fibre during the direct laser writing process. With the self-focusing effect considered and at a constant average irradiation dose of 1.62 × 10^3 J/（cm^2μm）, the threshold intensity for fabricating long-period gratings with infrared femtosecond laser pulses is determined to be 5.13 × 10^13 W/cm2.     

激光介质的多次吸收不均匀内热源模型

针对激光介质的内热源,以多次吸收作用为基础提出了适用于侧面双向泵浦板状激光介质的不均匀内热源模型,即多次吸收不均匀内热源模型,并与均匀内热源和一次吸收内热源模型进行了对比分析。研究表明,介质厚度及光吸收系数组成的无量纲参数不同时,三种内热源模型得到的内热源分布也有所不同。最后给出了内热源不均匀度及多次吸收模型与一次吸收模型之间的差异在不同目标值下的内热源模型适用准则。     

激光磁共振用于对NO_2分子的定量测量

本文叙述了采用CO激光磁共振方法对NO_2分子作定量测量,给出了激光磁共振信号幅度的数学表达式以及信号与分子浓度、激光功率等实验参数之间的依赖关系,实验结果与理论分析一致。     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

脉冲激光偏振方向对氮分子高次谐波的影响——基于含时密度泛函理论的模拟

采用含时密度泛函方法,结合赝势模型和电子交换相关作用的广义梯度近似,模拟了氮分子在超强飞秒激光脉冲作用下的高次谐波产生现象,并研究了激光脉冲偏振方向对氮分子高次谐波的影响.结果表明氮分子的高次谐波谱具有典型原子谐波谱的特征;谐波谱强度随着θ(激光偏振方向与分子轴向夹角)的增大而减小.这与J.Itatanl在Nature上报道的实验结果基本一致.     

水下光通信PPM数字接收机的DSP实现

水下光通信充分利用了海水对激光的衰减窗口效应,具有隐蔽、安全、非接触和快速机动等特性,兼具无线通信和光纤通信的优点,其关键技术在于光收发端机的研制;PPM(Pulse Position Modulation)数字脉冲位置调制具有低平均功率和高峰值功率等特性,特别适合用于无线数字光通信。两者性能的融合需要高灵敏度数字光接收机的实现。利用阵列光电检测接收、高速A/D转换和信号处理等相关技术,采用DSP处理器,高灵敏度的数字光PPM接收机得以实现,实验和测试表明它大大降低了接收机对于整个系统信噪比的要求,获得了较好的性能。     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

欧美国家制成激光加速器

目前，世界上已有3个实验组独立成功地利用激光场的尾波加速单能电子束。当一束强的激光脉冲进入气体或等离子体时。激光的电场可以加速运动的电子，直到相对静止的离子通过库仑场把电子拉回为止。等离子体波沿着激光脉冲的尾场运动。在合适的条件下，电子能够被等离子体波带着走；而以前。被加速的电子的能量是分散的。但是，只要加速过程在合适的时间停止。正在加速的电子可以超过等离子体波，而且所有的电子都达到相同的能量。由法国科研中心（GNRS）的维克多·莫片（Victor Malka）领导的小组和由英国伦敦皇家学院的斯多达·孟格利斯（StuartMangles）领导的小组已精确地调整其激光器和等离子体的参数，分别产生了能量约为170MeV和70MeV的准直电子束。