Kerr效应对非线性J-C模型辐射谱的影响

研究了Kerr介质腔中非线性J-C模型的辐射谱.导出了双模初始光场处于任意量子态时辐射谱的计算公式,给出了光场处于数态、相干态和压缩真空态时的数值结果,讨论了Kerr效应和初始场强对辐射谱的影响.发现在光子数态的情况下,Kerr效应使低频峰增强、高频峰减弱,并使各峰向右移动.在初始腔场为较强的相干态时,原子辐射谱明显地分成两个拱形的梳状峰群,Kerr效应的增强使左侧峰群增高,右侧的边峰受到抑制.在压缩真空态情况下,边带峰只出现在中心频率双峰的左侧,随Kerr效应和初始场的增强,边峰个数也随之增多.无论哪种情况都破坏谱结构的对称性,在强场条件下Kerr效应的影响更加显著.     

铬、钕双掺钆镓石榴石(Cr4+,Nd3+):Gd3 Ga5 O12激光晶体光学性能的研究

用提拉法生长了掺铬、钕的钆镓石榴石(Cr^4 ,Nd^3 ：GGG)自调Q激光品体。报道了室温下的吸收光谱和荧光光谱特性。分析了Cr离子浓度对光谱性质的影响。比较了Cr^4 ：GGG,Nd^3 ：GGG和(Cr^4 ,Nd^3 )：GGG晶体吸收光谱的关系。测量了(Cr^4 ,Nd^3 )：GGG晶体和Nd^3 ：GGG晶体的荧光寿命,它们分别是33μs和250μs。实验表明,(Cr^4 ,Nd^3 )：GGG晶体是一种非常有潜力的自调Q激光晶体,可以实现大功率激光器的小型化和全固态化。     

烧结温度和掺杂浓度对Y_4Zr_3O_(12)∶Eu~(3+)荧光粉发光性质的影响

采用溶胶凝胶法制备了Y_4Zr_3O_(12)∶Eu~(3+)纳米荧光粉,分别采用XRD、TEM和荧光光谱仪对样品的结构、形貌和发光性能进行了表征,探讨了烧结温度和Eu~(3+)掺杂浓度对荧光粉发光性能的影响。结果表明,样品可以被394 nm和467 nm的激发光有效激发。样品的最佳烧结温度和Eu~(3+)离子的最佳掺杂摩尔分数分别为1 400℃和18%。浓度猝灭主要归因于电偶极-电偶极相互作用。     

Mn掺杂Zn-In-S量子点的制备及发光性质研究

制备了Mn掺杂Zn-In-S量子点并研究了Zn/In的量比和反应温度对其发光性质的影响。在Mn掺杂的Zn-In-S量子点的发光谱中观测到一个600 nm发光带。通过改变Zn/In的量比,掺杂量子点的吸收带隙可从3.76 e V(330 nm)调谐到2.82 e V(440 nm),但600 nm发光峰的波长只有略微移动。这些掺杂量子点的最长荧光寿命为2.14 ms。当反应温度从200℃增加到230℃时,掺杂量子点的发光强度增加并达到最大值;而继续升高温度至260℃时,发光强度迅速减弱。此外,测量了Mn掺杂Zn-In-S量子点的变温发光光谱。发现随着温度的升高,发光峰位发生蓝移,发光强度明显下降。分析认为,Mn掺杂Zn-In-S量子点的600 nm发光来自于Mn2+离子的4T1和6A1之间的辐射复合。     

双模SU(1,1)相干态光场与V型三能级原子玻色-爱因斯坦凝聚体相互作用系统的量子性质

研究了双模SU(1,1)相干态光场与V型三能级原子玻色-爱因斯坦凝聚(BEC)相互作用系统中光场的量子相关性质、振幅平方压缩效应和原子激光压缩效应。结果表明,双模SU(1,1)相干态光场各模的二阶相干度不随时间变化,光场各模光子是反聚束的,呈现非经典效应,光场两模相关性是非经典相关。光场具有周期性的振幅平方压缩效应,讨论了光场相关参数和原子相关参数对压缩深度、压缩频率的影响。双模原子激光不易压缩,压缩深度取决于光场初态。     

基于频率调制激光驱动的囚禁离子几何相位逻辑门

为了避免激光相位的起伏对几何相位逻辑门保真度的影响, 提出一种基于囚禁离子的量子几何相位逻辑门的新方案。该机制是利用一束频率调制的行波激光场作用于两个囚禁离子上实现的。它的优点有：操作简单,仅需一步就能实现。不灵敏于激光场的相位也不需要对囚禁离子进行个别寻址。     

Deep level transient spectroscopy investigation of deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact

Deep levels in Cds/CdTe thin film solar cells have a potent influence on the electrical property of these devices. As an essential layer in the solar cell device structure, back contact is believed to induce some deep defects in the CdTe thin film. With the help of deep level transient spectroscopy (DLTS), we study the deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact. One hole trap and one electron trap are observed. The hole trap H1, localized at E_v+0.128~eV, originates from the vacancy of Cd (V_Cd. The electron trap E1, found at E_c-0.178~eV, is considered to be correlated with the interstitial Cu_i⁼ in CdTe.     

Bell态原子与双模纠缠相干光场双光子相互作用系统的量子纠缠

运用全量子理论和数值计算的方法,借助于原子的量子约化熵研究了初始处于Bell态|β00>和| β10>的两原子与双模纠缠相干光场双光子相互作用系统中两原子与双模光场之间纠缠的演化特性.分析了光场强度、光场纠缠度及原子间相互作用强度对原子熵演化特性的影响.结果表明:随着双模光场的平均光子数的增大,原子熵的时间演化曲线逐渐变为规则振荡;增大原子间的相互作用强度,原子熵的振荡频率和振幅都减小;改变双模光场的纠缠度,原子熵的振荡频率和振幅都不发生改变.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

Numerical simulation of end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm

A theoretical model to simulate an end-pumped CW Nd^3＋：GdVO4 laser at 1063 nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti：sapphlre-pumped Nd^3＋：GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.