基于条纹中心线的载波散斑条纹解调方法

针对传统傅里叶变换法在处理含有多突起的载波散斑条纹图时,由于存在频谱展宽会出现严重的解调相位失真,提出了一种基于条纹中心线的载波散斑条纹解调方法.根据载波调制时所采用平行调制方式和倾斜调制方式,分别从理论上对相关的中心线解调法进行数学推导,并进一步采用最小二乘三次曲面拟合法获得被测物面全场的离面位移信息.实验结果表明:利用上述中心线解调法和曲面拟合法能解调出复杂的载波条纹图,并获得具有亚像素定位准确度、连续光滑的全场离面位移信息.     

表面等离子共振现象的新应用——微弱磁场的测量

提出了一种新的表面等离子体共振传感器, 它包含三层结构: 棱镜、金属薄膜及二能级介质. 通过理论分析发现, 与通常表面等离子体共振系统不同, 这一物理系统中同时存在两种共振效应 (表面等离子体共振和能级间量子跃迁的共振效应), 它们共同作用的结果导致一系列新的物理现象, 其中一个令人感兴趣的现象是入射光的反射率对外场导致的微小能级移动十分敏感 (这一现象是通常的表面等离子体共振系统所不具有的). 由于能级移动依赖于外场, 所以最终入射光的反射率对外场具有灵敏的响应. 本文以外磁场导致能级移动的情况进行了理论计算, 结果表明, 这种表面等离子体共振系统的入射光的反射率对外加磁场极其敏感. 这一特性可以用来测量物质表面附近的微弱磁场, 有可能发展成为一种新型检测技术.     

基于自衍射效应的自参考光谱干涉方法的研究

研究一种基于非线性透明光学介质中的自衍射和自参考光谱干涉的新方法来进行飞秒激光脉冲测量. 实验中, 基于此新方法设计一种简单装置, 对800 nm 中心波长, 约40 fs 近无啁啾飞秒激光脉冲进行测量, 并与自参考光谱相干电场重建法测量结果进行比较, 得到了一致的结果. 此新方法与相应的装置结构简单, 可以对深紫外到中红外光谱范围的飞秒脉冲进行测量. 关键词： 飞秒激光脉冲 自参考光谱干涉 自衍射 脉冲测量     

Consistency proof of two denoising methods and the parameter selection of PDE filtering method for ESPI

Electronic speckle pattern interferometry （ESPI） is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation （SOOPDE） and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.     

Four distributed feedback laser array integrated with multimode-interference and semiconductor optical amplifier

Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback (DFB) lasers using varied ridge width with a 4×1-multimode-interference (MMI) optical combiner and a semiconductor optical amplifier (SOA) is demonstrated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio (SMSR) exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.     

A polyene chain of canthaxanthin investigated by temperature-dependent resonance Raman spectra and density functional theory （DFT） calculations

We report on a temperature-dependent resonance Raman spectral characterization of the polyene chain of canthax- anthin. It is observed that all vibrational intensities of the polyene chain are inversely proportional to temperature, which is analyzed by the resonance Raman effect and the coherent weakly damped electron/lattice vibrations. The increase in intensity of the CC overtone/combination relative to the fundamental with temperature decreasing is detected and discussed in terms of electron/phonon coupling and the activation energy Uop. Moreover, the polyene chain studies using the density functional theory B3LYP/6-31 G＊ level reveal a prominent peak at 1525 cm-1 consisting of two closely spaced modes that are both dominated by C=C stretching coordinates of the polyene chain.     

Resonant energy transfer from nanocrystal Si to β-FeSi2 in hybrid Si/β-FeSi2 film

The photoluminescence （PL） characteristics of hybrid β-FeSi2/Si and pure β-FeSi2 films fabricated by pulsed laser deposition at 20 K are investigated. The intensity of the 1.54-μm PL from the former is enhanced, but the enhancement vanishes when the excitation wavelength is larger than the widened band gap of Si nanocrystal. Time-resolved PL decay measurements reveal that the lifetime of the photo-excited carriers in the hybrid β-FeSi2/Si film is longer than that in the pure β-FeSi2 film, providing evidence that the PL enhancement results from the resonant charge transfer from nanocrystalline Si to β-FeSi2.     

Numerical analysis of the resonance mechanism of the lumped parameter system model for acoustic mine detection

The method of numerical analysis is employed to study the resonance mechanism of the lumped parameter system model for acoustic mine detection. Based on the basic principle of the acoustic resonance technique for mine detection and the characteristics of low-frequency acoustics, the “soil-mine” system could be equivalent to a damping “mass-spring” resonance model with a lumped parameter analysis method. The dynamic simulation software, Adams, is adopted to analyze the lumped parameter system model numerically. The simulated resonance frequency and anti-resonance frequency are 151 Hz and 512 Hz respectively, basically in agreement with the published resonance frequency of 155 Hz and anti-resonance frequency of 513 Hz, which were measured in the experiment. Therefore, the technique of numerical simulation is validated to have the potential for analyzing the acoustic mine detection model quantitatively. The influences of the soil and mine parameters on the resonance characteristics of the soil–mine system could be investigated by changing the parameter setup in a flexible manner.