平板热管在毛细极限下的传热能力研究

建立了多孔毛细芯结构的平板热管在冷凝段不发生堵塞的情况下流动和传热的理论模型,分析了热管在毛细限下的最大传热量和热阻的变化.结果表明,丝网目数的增加和工作温度的升高会增大热管的传热能力,热管工质为水时的传热性能优于工质为丙酮和乙醇时的情况.     

Comparison of Nd:YAG Ceramic Laser Pumped at 885nm and 808nm

Laser performance of 1064 nm domestic Nd：YAG ceramic lasers for 885 nm direct pumping and 808 nm traditional pumping are compared. Higher slope efficiency of 34% and maximum output power of 16.5 W are obtained for the 885nm pump with a 6ram length 1 at.% Nd：YAG ceramic. The advantages for 885nm direct pumping are discussed in detail. This pumping scheme for highly doping a Nd：YAG ceramic laser is considered as an available way to generate high power and good beam quality simultaneously.     

Long-Range Interactions between Nematicons

We theoretically and experimentally investigate the long-range interaction between nematicons. It is demonstrated that the interaction becomes strongest when the pretilt angle of liquid crystal molecules is nearly π/4 for a given single-beam input power P0, and that the interaction becomes stronger when the incident power Po increases at a given pretilt angle. In this way, the interaction is still observed when the initial separation is 43 times of the soliton width, much larger than that implemented in lead glasses [Nature Phys. 2 （2006） 769].     

Beam Quality and Power Scalability of Various Multicore Fiber Lasers

Beam quality and power scalability analyses for various multicore fiber lasers （MFL） are presented. In-phase complex amplitude and corresponding far-field intensity distribution of each type of MFL is calculated using the finite-difference time-domain method. It is revealed that the hexagonal ring-type MFL has the best performance in power handling and maintaining beam quality. Further calculation indicates that power encircled in the diffraction-bucket of L-core MFL scales with no more than 0.4L, which chaJlenges the practical worthiness of fielding MFL with a large number of cores.     

All-Solid-State Nd:YAG Laser Operating at 1064nm and 1319nm under 885nm Thermally Boosted Pumping

We report a high-effciency Nd：YAG laser operating at 1064 nm and 1319nm, respectively, thermally boosted pumped by an all-solid-state Q-switched Ti：sapphire laser at 885 nm. The maximum outputs of 825.4 m W and 459.4mW, at 1064nm and 1319nm respectively, are obtained in a 8-ram-thick 1.1 at.% Nd：YAG crystal with 2.1 W of incident pump power at 885nm, leading to a high slope efficiency with respect to the absorbed pump power of 68.5% and 42.0%. Comparative results obtained by the traditional pumping at 808nm are presented, showing that the slope efficiency and the threshold with respect to the absorbed pump power at 1064nm under the 885nm pumping are 12.2% higher and 7.3% lower than those of 808rim pumping. At 1319nm, the slope efficiency and the threshold with respect to the absorbed pump power under 885nm pumping are 9.9% higher and 3.5% lower than those of 808 nm pumping. The heat generation operating at 1064 nm and 1319 nm is reduced by 19.8% and 11.1%, respectively.     

A Continuous-Wave Ho：YA103 Laser with Output 8.5 W Pumped by a 1.91μm Laser at Room Temperature

A cw high efficient Ho：YAI03 laser pumped by 1.91 μm diode-pumped Tm：YLF laser at room temperature is realized. The maximum output power reaches 8.5 W when the incident pump power is 15.6 W. The slope efficiency is 63.7%, and the Tm：YLF to Ho：YAP optical conversion efficiency is 54.5%. The laser wavelength is 2118.3nm when the transmission of output coupler is 30%. The beam quality factor is M2 -1.39 measured by the traveling knife-edge method.     

A MIXED MODE FRACTURE CRITERION BASED ON THE MAXIMUM TANGENTIAL STRESS IN BRITTLE INCLUSION

A closed-form solution for predicting the tangential stress of an inclusion located in mixed mode Ⅰ and Ⅱ crack tip field was developed based on the Eshelby equivalent inclusion theory. Then a mixed mode fracture criterion, including the fracture direction and the critical load, was established based on the maximum tangential stress in the inclusion for brittle inclusioninduced fracture materials. The proposed fracture criterion is a function of the inclusion fracture stress, its size and volume fraction, as well as the elastic constants of the inclusion and the matrix material. The present criterion will reduce to the conventional one as the inclusion having the same elastic behavior as the matrix material. The proposed solutions are in good agreement with detailed finite element analysis and measurement.     

不确定参数闭环控制系统特征值的区间分析

运用区间理论,讨论了区间参数的结构振动控制问题,给出了求解闭环系统区间特征值的一种方法．基于区间参数导出了区间刚度矩阵和质量矩阵,然后利用矩阵摄动理论和区间扩张理论,推导了复区间特征值上下界估计的算法．这些结果是从二阶系统的左右特征向量出发得到的．将该文方法应用到悬臂梁的控制问题,数值结果表明它是有效的．     

OPERATIONAL MODAL ANALYSIS SCHEMES USING CORRELATION TECHNIQUE

For some large-scale engineering structures in operating conditions, modal parameters estimation must base itself on response-only data. This problem has received a considerable amount of attention in the past few years. It is well known that the cross-correlation function between the measured responses is a sum of complex exponential functions of the same form as the impulse response function of the original system. So this paper presents a time-domain operating modal identification global scheme and a frequency-domain scheme from output-only by coupling the cross-correlation function with conventional modal parameter estimation. The outlined techniques are applied to an airplane model to estimate modal parameters from response-only data.     

基于随机搜索的一个约束优化问题的全局收敛算法

讨论了具有一般约束的全局优化问题,给出该问题的一个随机搜索算法,证明了该算法依概率1收敛到问题的全局最优解．数值结果显示该方法是有效的．