应用理性优化蚁群算法提高激光三维复制的重现度

三维复制人工耳和打印手枪把激光三维复制技术推向新的一页。激光三维扫描是激光应用中一个新兴的重要领域,在三维复制中扮演着无可替代的角色,其复制精度在目前所有复制技术中是最高的。而重现度标志着复制结果与复制对象几何形状上的一致程度,是激光三维复制最重要的指标。分析了激光三维复制的误差,得出激光扫描的点云数据处理是减小误差、提高重现度的关键所在的结论。主要创新点在于,在传统蚁群算法的基础上,将提出理性优化蚁群算法应用于激光三维复制中的数据处理。经计算对比发现,有效减小了复制的误差,提高了复制的重现度。     

曲率限制的红外焦平面告警系统目标搜索算法

为了降低红外焦平面告警系统中较高的虚警率,提出了一种速度限制基础上基于曲率限制的目标搜索算法。以视场角5.34.0凝视型红外告警系统为例,在MATLAB中对红外图像序列进行了目标搜索实验,验证了该算法的可行性。按照蒙特卡罗法思路模拟了包含大量随机噪声的目标场景,研究了该算法相比传统多帧检测算法对随机噪声的抗干扰性。对该算法的搜索帧数进行了扩展,给出了不同搜索帧数的搜索效果和时效性表现。     

面心立方结构三维光子晶体的带隙特性

选择ZnSe、CdTe、AIP和GaAs 4种材料设计构成面心立方三维光子晶体结构,基于平面波展开法通过计算,得到带隙存在于0Hz、0.8140-0.8406Hz、0.7924-0.8218Hz和0.7457-0.7837Hz范围,带隙宽度随着4种材料介电常数的增加而增加.研究结论为三维光子晶体的制备提供参考.     

荧光光谱法研究β-紫罗兰酮与溶菌酶的相互作用

应用溶菌酶内源荧光光谱研究了芳香族化合物β-紫罗兰酮与卵清溶菌酶蛋白之间的结合反应,测定了两者之间的结合常数kA为1.44×103L·mol-1,结合位点数n为0.85.根据Foerster非辐射能量转移理论,确定了能量给体与受体之间的结合距离为2.27nm,符合非辐射能量转移条件.通过同步荧光光谱和三维荧光光谱,进一步研究了β-紫罗兰酮对溶菌酶蛋白构象的影响,结果显示β-紫罗兰酮的加入引起溶菌酶蛋白构象的变化,溶菌酶内部色氨酸残基所处环境的疏水性降低.     

锂玻璃探测器中子探测效率的刻度

为了精确测量keV能区的中子俘获截面,中国原子能科学研究院正在建造一台4π 全吸收型γ 探测装置---GTAF,锂玻璃探测器将会作为中子束流监视器测量中子能谱。利用5SDH-2 加速器刻度了锂玻璃探测器在两个入射中子单能点(250 和565 keV) 的探测效率,并使用EANT4 和MCNP 程序模拟计算了锂玻璃探测器的相对探测效率。通过归一化实验数据和模拟结果,得到了锂玻璃探测器在10keV~1 MeV 能区的中子探测效率曲线。对于把锂玻璃探测器测量得到的飞行时间谱转化为中子束流能谱,是一项非常重要的工作,同时为探测器效率刻度提供了新方法。In order to accurately measure the neutron capture cross section in the energy range of keVMeV, 4 πgamma-ray total absorption facility (GTAF) is being constructed at China Institute of Atomic Energy (CIAE). The lithium glass detector will be used as a neutron beam monitor for GTAF. The detection efficiency of the lithium glass detector at two incident neutron energy points (250, 565 keV) was calibrated in 5SDH-2 accelerator, and the relative detection efficiency was simulated by GEANT4 and MCNP code. By the normalization of the experimental data and simulation result, the neutron detection efficiency curve of the lithium glass detector between 10 keV and 1 MeV was obtained. This work will be important to convert the Time-of-flight spectrum that be measured by Li-glass detector to the energy spectrum of neutron beam, and provide the new method for calibration of detection efficiency.     

广西大风子中2个新木脂素的NMR研究

从广西大风子的皮中分离得到两个新木脂素1和2,并通过高分辨质谱和核磁共振确定了其结构. 利用多种二维核磁共振技术,包括HSQC, HMBC, DQF-COSY 和NOESY谱,对其碳氢信号进行了全归属. 毛细管电泳分析显示1和2均为外消旋体.     

三氯化氮气体喷射自发分解实验研究

 在气体流动管中对三氯化氮气体喷射自发分解的现象进行了初步实验研究。在一根长80 cm，直径4 cm的圆柱形石英玻璃管中，用喷嘴向气体流动管内喷射NCl₃/He混合气体，观察到了NCl₃喷射分解时的红色火焰。测量了火焰光谱并进行了归属，认为该光谱是Cl₂(B→X)辐射跃迁。NCl­₃的喷射自发分解本质上是激波诱导发生的，即分子的动能转化为分子内能而引起的，生成的Cl原子及NCl₂自由基与NCl₃分子反应，从而得到持续燃烧火焰。实验结果表明了NCl₃自发分解反应可代替放电或燃烧作为Cl原子的来源。     

Equivalent Antisymmetry Performance of Three—Dimensional Heterogeneous Anisotropic Composites

Starting from the physical features of materials, heterogeneous anisotropic composites (HAGs) are analysed on the basis of the understanding and applications of its equivalent antisymmetry performance. Moreover, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful. The HAG structure is defined as a kind of equivalent structures according to the structure and properties of materials.We apply the mature plate theory and the composite materials laminate theory in analysis of the HAG structure,and in this way a new concept and a new idea are expected.     

利用频闪结构光测量旋转叶片的三维面形

在对快速甚至高速运动物体进行研究时,需要对运动物体各个时刻的三维面形和形变量进行数字化描述。提出了一种利用频闪光作为结构照明光源,基于傅里叶变换轮廓术对旋转叶片每个时刻的三维面形和变形量进行动态测量的光学方法。使用自行设计的同步控制单元对风扇叶片旋转位置进行检测,用该检测信号同步驱动频闪结构光源的发光和图像采集系统“冻结”记录下旋转叶片表面变形条纹的瞬时图像,再运用傅里叶变换轮廓术计算出每一瞬间时刻旋转叶片的三维面形,分析这些三维面形数字化结果可以进一步得到旋转叶片的变形量。通过对家用电风扇的实验,验证了该方法的合理性和可行性。该方法可望在高速运动物体的面形和变形研究上有广泛运用。     

A meshless model for transient heat conduction analyses of 3D axisymmetric functionally graded solids

A meshless numerical model is developed for analyzing transient heat conductions in three-dimensional （3D） axisymmetric continuously nonhomogeneous functionally graded materials （FGMs）. Axial symmetry of geometry and boundary conditions reduces the original 3D initial-boundary value problem into a two-dimensional （2D） problem. Local weak forms are derived for small polygonal sub-domains which surround nodal points distributed over the cross section. In order to simplify the treatment of the essential boundary conditions, spatial variations of the temperature and heat flux at discrete time instants are interpolated by the natural neighbor interpolation. Moreover, the using of three-node triangular finite element method （FEM） shape functions as test functions reduces the orders of integrands involved in domain integrals. The semi-discrete heat conduction equation is solved numerically with the traditional two-point difference technique in the time domain. Two numerical examples are investigated and excellent results are obtained, demonstrating the potential application of the proposed approach.