何加铭教授被评为“宁波市杰出专家”

何加铭博士1998年浙江大学无线通信专业博士后出站,2 0 0 0年4月调入宁波大学,担任通信技术研究所所长、通信与信息系统无线通信方向学术带头人、宁波市通信芯片与射频技术重点实验室主任、宁波移动通信省级高新技术开发中心主任。何博士也是我校“百名教授、博士进企业”教师之一,到宁波大明通信科技发展有限公司担任总经理。他敬业尽职,在不耽误宁波大学信息学院学科建设和研究生讲课和指导的前提下,为宁波无线通信产业的发展做出了一定的成绩。他主持大明公司以来,已实现销售收入4 2 84万元,利税90 0多万元。在近三年时间里,何加铭博士先…     

MATLAB中复杂非线性模块的构造

介绍了几种在MATLAB／SIMULINK中构造复杂非线性模块的技巧．方法独特，简便，本文旨在抛砖引玉．为其他用户解决类似问题提供一个新的思路．     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

基于半导体材料的新型光纤温度传感器

提出利用全反射定律以半导体材料作为敏感器件的光纤温度传感器，着重阐述半导体材料的温度敏感特性及传感原理，介绍传感器构造，并给出初步实验方案。     

光纤陀螺信号处理中SLD驱动电路设计

光纤陀螺用光源要求输出功率高、相干性低、稳定性好，超辐射发光二极管（SLD）是能满足这些要求的理想光源，目前国内光纤陀螺用的光源基本上主要选择超辐射发光二极管（SLD），从工程实际应用出发，介绍了超辐射发光二极管（SLD）驱动电路设计，以此来提高光纤陀螺性能。     

Investigation of External Optical Feedback Resistance of IC—DFB and GC—DFB Lasers Using a Very Simple Experimental set—up

We study the external optical feedback resistance of both index-coupled(IC) and gain-coupled distributed feed-back(DFB) lasers using a very simple experimental set-up.Though IC-DFB lasers with large coupling coefficients are found to be less sensitive to external reflection,they suffer from mode instability at high injection level.On the other hand ,the introduction of gain-coupling mechanism can significantly improve both the immunity of external optical feedback and the single mode yield of the device.     

磁光玻璃光纤的偏振特性及其在全光纤电流传感器中的应用

在磁光玻璃裸光纤偏振特性研究的基础上，研制磁光玻璃光纤，偏振特性及其在全光纤电流传感器中的应用。将采用模管法拉制成的磁光玻璃光纤置于亥姆霍兹线圈产生的磁场中，当线偏振光通过该光纤时，其偏振面旋转一定角度，把该角度转换成光信号的强度，然后再用仪器进行检测。通过对线偏振光偏振面在磁场中的偏振特性的测试与实验，提出用磁光玻璃光纤构成的全光纤电流传感器，可用于电流和磁场测试。     

利用相位共轭技术补偿光纤中色散效应的条件

利用相位共轭器的频率反转特性的,补偿光纤中的色散效应,在理论上和实验上得到了证明.由色散脉冲的傅里叶交换确定了光纤中二次色散效应可以被忽略的条件,得到了共轭器的反射率和带宽与非线性介质的长度L,参数|K|L之间的关系曲线,找到了影响补偿效果的主要因素.     

正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

非线性物理简介:8.光学孤子及其在光纤通讯中的应用

本文介绍了光学孤子的形成、特性及其在光纤通讯中的应用．